波音737-800飞机起飞性能随襟翼放出量的变化特点

波音737飞机与其他民用机型的一个不同之处是前缘缝翼在起飞时可以使用开缝状态。分析了波音737-800飞机下列四个起飞性能参数与襟翼放出量的关系:场地长度限制的最大起飞重量;爬升梯度限制的最大起飞重量;障碍物限制的最大起飞重量;起飞决断速度。结果显示这四个参数在襟翼放出量为10时出现异常,原因是前缘缝翼状态发生了变化。在襟翼放出量由5增大到10的过程中,前缘缝翼由不开缝的放出状态变成开缝的完全放出状态,降低了升力系数。     

浅析运输类飞机经济舱头排旅客座椅头部损伤判据的影响因素

介绍了头部损伤判据HIC的概念、适航要求及影响运输类飞机客舱头排旅客座椅HIC的相关参数;叙述了旅客座椅头排距、头部撞击壁板的刚度、安全带织带伸长率、乘坐摩擦系数等参数的影响和重要程度;对如何设计符合HIC要求的经济舱头排旅客座椅和壁板提出了建议。     

现代民机新型灭火剂性能研究

对新型灭火剂研究背景和种类进行了简要介绍,对具有开发潜力的新型灭火剂的理化性能、毒性、腐蚀性、灭火性能、环保性能进行深入分析与研究。通过对新型灭火剂性能的研究,得出每种灭火剂的优缺点,筛选出适用于现代民机灭火系统的灭火剂。     

民用飞机综合模块化航电系统分区和资源分配的研究

对比航电传统系统架构,分析了综合模块化航电系统(Integrated Modular Avionics,简称IMA)架构的优点;针对IMA系统功能的高集成度带来的资源分配难度和安全性要求,提出了IMA系统分区和资源分配策略,并给出了具体方法,对民用飞机IMA系统设计具有一定的指导意义和实用价值。     

基于A320飞机横航向控制律架构的LQ设计

空客A320飞机横航向控制律采用特征结构配置方法计算闭环增益,实现了期望特征值的配置及横航向关键参数之间的解耦。基于A320横航向控制律架构,提出使用线性二次型(Linear Quadratic,简称LQ)方法,对闭环增益进行重新设计。首先根据期望的特征值引入关键参数的频域整形环节,而后通过调整二次型性能指标加权矩阵实现期望特征值的逼近及关键参数之间的解耦,并求得闭环反馈增益,最后在特征结构、稳定裕度和横航向解耦效果方面与空客设计结果作了对比分析。仿真结果表明,LQ设计可获得与特征结构配置设计相近的结果,即得到接近期望值的特征值,并实现关键变量的解耦,同时保证了闭环稳定裕度。     

微小推力下小卫星的轨道递推与推力标定

针对采用微小推力进行轨道机动的小卫星,考虑复杂摄动力的基础设计了一种高精度轨道外推和推力在轨标定算法.首先,建立了考虑地球复杂摄动力和微小推力的小卫星轨道动力学模型;然后基于动力学模型,利用变步长龙格库塔算法,设计了对微小推力小卫星进行高精度轨道外推的方法.随后通过无迹卡尔曼滤波器(UKF),设计在轨标定算法,对存在误...     

CCD信号采样位置选取方法的研究

针对CCD输出信号中的复位噪声,文章介绍了处理复位噪声较为常用的方法--相关双采样技术,并对相关双采样技术中采样位置选取的方法进行分析和研究,最后进行了实验验证.结果表明:用文中方法选取的采样位置进行相关双采样,可以较好的减小CCD输出信号中复位噪声的影响,提高信噪比.     

Materials selection for electronic enclosures in space environment considering electromagnetic interference effect

Using low power electronic devices for space applications to reduce the mass and energy consumption has lead to electromagnetic interference (EMI) problem. Electronic enclosures are used to shield electronic devices against EMI. In the past, electromagnetic shielding has been mainly the only criteria considered in electronic enclosure design. However, there are several structural and thermal requirements for selection of shielding materials which should also be taken into account. In this research work, three quantitative materials selection methods, i.e. Digital Logic (DL), Modified Digital Logic (MDL), and Z-transformation, are employed to select the best material from among a list of candidate materials. Composite and metallic electronic enclosures are explored and the best material is selected. Z-transformation method is applicable to both of the considered case studies while DL and MDL can only be used for solving one of them. Z-transformation method ranks aluminum as the first choice among various metallic materials. The wide range of Z-transformation application and its practical results confirm the superiority of Z-transformation method over DL and MDL methods.     

A nonlinear background removal method for seismo-ionospheric anomaly analysis under a complex solar activity scenario: A case study of the M9.0 Tohoku earthquake

A precise determination of ionospheric total electron content (TEC) anomaly variations that are likely associated with large earthquakes as observed by global positioning system (GPS) requires the elimination of the ionospheric effect from irregular solar electromagnetic radiation. In particular, revealing the seismo-ionospheric anomalies when earthquakes occurred during periods of high solar activity is of utmost importance. To overcome this constraint, a multiresolution time series processing technique based on wavelet transform applicable to global ionosphere map (GIM) TEC data was used to remove the nonlinear effect from solar radiation for the earthquake that struck Tohoku, Japan, on 11 March, 2011. As a result, it was found that the extracted TEC have a good correlation with the measured solar extreme ultraviolet flux in 26–34 nm (EUV_26–34) and the 10.7 cm solar radio flux (F_10.7). After removing the influence of solar radiation origin in GIM TEC, the analysis results show that the TEC around the forthcoming epicenter and its conjugate were significantly enhanced in the afternoon period of 8 March 2011, 3 days before the earthquake. The spatial distributions of the TEC anomalous and extreme enhancements indicate that the earthquake preparation process had brought with a TEC anomaly area of size approximately 1650 and 5700 km in the latitudinal and longitudinal directions, respectively.     

自动化计量学大会展出的坐标测量机

介绍自动化计量学大会展出的坐标测量机及其结构，性能和使用范围。