Advanced multiple response surface method of sensitivity analysis for turbine blisk reliability with multi-physics coupling

To reasonably implement the reliability analysis and describe the significance of influencing parameters for the multi-failure modes of turbine blisk, advanced multiple response surface method(AMRSM) was proposed for multi-failure mode sensitivity analysis for reliability. The mathematical model of AMRSM was established and the basic principle of multi-failure mode sensitivity analysis for reliability with AMRSM was given. The important parameters of turbine blisk failures are obtained by the multi-failure mode sensitivity analysis of turbine blisk. Through the reliability sensitivity analyses of multiple failure modes(deformation, stress and strain) with the proposed method considering fluid–thermal–solid interaction, it is shown that the comprehensive reliability of turbine blisk is 0.9931 when the allowable deformation, stress and strain are3.7*10~(-3)m, 1.0023*10~9 Pa and 1.05*10~(-2)m/m, respectively; the main impact factors of turbine blisk failure are gas velocity, gas temperature and rotational speed. As demonstrated in the comparison of methods(Monte Carlo(MC) method, traditional response surface method(RSM), multiple response surface method(MRSM) and AMRSM), the proposed AMRSM improves computational efficiency with acceptable computational accuracy. The efforts of this study provide the AMRSM with high precision and efficiency for multi-failure mode reliability analysis, and offer a useful insight for the reliability optimization design of multi-failure mode structure.     

基于螺纹综合扫描仪的螺纹参数测量方法研究

航空用螺纹的质量和性能直接影响飞机的安全,因此螺纹参数的精确测量至关重要。通过比较几种传统螺纹测量方式的优缺点,确定一种最佳的测量方法——螺纹综合扫描仪测量法。该方法测量精度可靠,参数齐全且效率高。此外,介绍了螺纹综合扫描仪的测量原理,并对其进行了误差分析。利用几种不同的测量方法对同一螺纹进行测量结果的比对,同时做了仪器的重复性和稳定性试验,验证了该测量方法的可靠性。     

Performance deterioration modeling and optimal preventive maintenance strategy under scheduled servicing subject to mission time

Servicing is applied periodically in practice with the aim of restoring the system state and prolonging the lifetime. It is generally seen as an imperfect maintenance action which has a chief influence on the maintenance strategy. In order to model the maintenance effect of servicing, this study analyzes the deterioration characteristics of system under scheduled servicing. And then the deterioration model is established from the failure mechanism by compound Poisson process. On the basis of the system damage value and failure mechanism, the failure rate refresh factor is proposed to describe the maintenance effect of servicing. A maintenance strategy is developed which combines the benefits of scheduled servicing and preventive maintenance. Then the optimization model is given to determine the optimal servicing period and preventive maintenance time, with an objective to minimize the system expected life-cycle cost per unit time and a constraint on system survival probability for the duration of mission time. Subject to mission time, it can control the ability of accomplishing the mission at any time so as to ensure the high dependability. An example of water pump rotor relating to scheduled servicing is introduced to illustrate the failure rate refresh factor and the proposed maintenance strategy. Compared with traditional methods, the numerical results show that the failure rate refresh factor can describe the maintenance effect of servicing more intuitively and objectively. It also demonstrates that this maintenance strategy can prolong the lifetime, reduce the total lifetime maintenance cost and guarantee the dependability of system.     

飞机维修技术探析

介绍现代飞机维修理念,分析国内飞机维修工作的基本情况,结合国际上飞机维修理念及其发展趋势,针对自身条件和生产现状,提出目前国内飞机应用的维修策略及方法。     

对高温低周疲劳寿命预测模型的评价

高温低周劳寿命预测方法对于承受变幅载荷的高温构件的设计具有重要意义。本文系统介绍了迄今这方面所取得的研究成果，特别对目前在国内外影响较大的ＳＲＰ等几个ＨＬＦ寿命预测的经典参数模型和近些年发展起来的预测ＨＬＦ寿命的损伤力学方法作了较为详细的评价，并指出存在问题和研究方向。     

固体火箭发动机可靠性评定的影子理论及应用

首次提出可靠性评定的影子问题,证明了影子定理,并用影子定理对固体火箭发动机的结构可靠性进行了评定,表明其具有应用价值。     

由PETRI网模型求系统最小割集的自顶向下法

研究了系统逻辑关系的Ｐｅｔｒｉ网表示，基于Ｐｅｔｒｉ网的建模方法，采用Ｐｅｔｒｉ网模型求系统最小割集的自顶向下法，与故障树方法相比，这种方法可同时获得系统的最小割集和最小路集，且求解的效率高，实例分析证实了这一点。     

XZG—2型综合告警器的研制

ＸＺＧ－２型综合告警器是配装在ＪＬ８飞机上的机载成件。本文介绍了该告警器的结构特点、工作原理及研制情况。     

Reliability design optimization of composite structures based on PSO together with FEA

The present work aims to develop a method for reliability-based optimum design of composite structures. A procedure combining particle swarm optimization (PSO) and finite element analysis (FEA) has been proposed. Numerical examples for the reliability design optimization (RDO) of a laminate and a composite cylindrical shell are worked out to demonstrate the effectiveness of the method. Then a design for composite pressure vessels is studied. The advantages and necessity of RDO over the conventional equi-strength design are addressed. Examples show that the proposed method has good stability and is efficient in dealing with the probabilistic optimal design of composite structures. It may serve as an effective tool to optimize other complicated structures with uncertainties.     

潜通路分析在飞行器电气系统设计中的应用

简要介绍了潜通路分析的概念、国内外发展现状,分析了与其他可靠性设计方法的关系,认为潜通路分析是可靠性分析的有效补充。结合具体案例分析潜在路径、潜在时序、潜在标志和潜在指示的问题产生和解决。最后展望了潜通路分析技术在飞行器设计中的应用前景。