无人机路径规划中的环境和威胁模型研究

为了提高无人机执行任务时的突防能力,在进行飞行路径规划时必须对战场环境中的威胁环境进行评估,而威胁环境中的威胁估计与飞机被雷达或类似的传感器探测出的风险度有关,需要考虑的信息包括无人机传感器范围内的威胁位置和强度.路径规划算法依赖于路径规划空间的建模方式,包括环境建模和威胁源建模.目前针对规划空间环境和威胁模型的建模方法缺乏系统分类和论述.分析了战场环境的建模方法,研究了规划空间的离散建模方式,根据无人机飞行过程中可能遭遇的威胁类型进行威胁源类型的划分,并针对三种威胁类型分别建立威胁风险模型,为无人机在复杂环境下的路径规划实现做了参数准备.     

单一压力容器镍氢电池组几何参数对其温度场的影响

 针对实际空间用单一压力容器(IPV)镍氢电池组的传热特点,建立其瞬态热分析的数学物理仿真模型。通过设计改变电池组几何参数,包括电池组底板厚度、套筒高度和厚度,采用有限差分法,对比模拟研究电池组在飞船实际运行条件下几何参数对其温度场的影响。结果表明：套筒厚度对电池组温度场的影响最为敏感,增大套筒厚度可明显缩短电池组热系统达到平衡态的响应时间;其次是套筒高度;改变底板厚度对电池组温度场变化影响不明显。该研究为镍氢电池组的结构优化和热控制研究提供理论基础。     

货物舱内移动过程的建模与仿真(英文)

研究了运输机重型货物舱内移动飞行过程的控制建模问题。通过建立坐标系,利用牛顿第二定律和空间刚体的欧拉角关系,推导货物舱内移动飞行过程中质心运动动力学方程和绕质心运动动力学方程,分析舱内移动过程对运输机飞行的影响,最后对所建立的飞行控制模型进行系统仿真。     

Design of Flight Control System for a Small Unmanned Tilt Rotor Aircraft

A tilt rotor is an aircraft of a special kind, which possesses the characteristics of a helicopter and a fixed-wing airplane. However, there are a great number of important technical problems waiting for settlements. Of them, the flight control system might be a critical one. This article presents the progresses of the research work on the design of flight control system at Nanjing University of Aeronautics and Astronautics (NUAA). The flight control law of the tilt rotor aircraft is designed with the help of an inner/outer loop control structure and an eigenstructure assignment algorithm on the basis of a proper mathematical model already verified by the wind tunnel tests. The proposed control law has been born out through the construction of the flight control system and the flight tests. Now, the flight tests are still underway on a prototype of small unmanned tilt rotor aircraft. The results have evidenced the credibility of the aircraft design and the effectiveness of the flight control system for the tilt rotor working in the helicopter mode. A full envelope flight test is planned to carry out further researches on the flight control law.     

基本作战单元修复性维修过程建模仿真

为分析评价基本作战单元修复性维修保障方案,准确计算故障修复时间,根据 系统工程建模思想,建立了基本作战单元站点间、站点内修复性维 修过程仿真模型,对其修复性维修活动进行了详细描述,提出了累积维修比、维修模式比和 拆卸率因子参数,为基本作战单元修复性维修过程的定量分析提供了度量方法,并根据 Monte Carlo仿真原理给出仿真算法,为型号工作人员进行保障性设计分析提供了理论方法和技 术手段,最后以某型飞机组成的基本作战单元为例,对其修复性维修保障方案进行仿真试验 验证,分析了修复性维修过程的改进对保障资源和维修时间的影响.      

双系缆气球绳网系统的建模、配平及稳定性

为研究一种双系缆气球绳网系统的气球、绳网的设计问题和系统抗风能力的评估问题,建立了考虑风影响的双系缆气球绳网系统的数学模型,其中包括在体轴系下建立的气球的数学模型、根据无限细化理论建立的系缆的数学模型和按照一定的简化假设建立的绳网的数学模型;在配平状态下引入小扰动假设,使非线性方程组线化,并分析了该系统对阶跃风扰动的响应和稳定性.仿真计算结果表明该系统的设计合理并具有一定的抗风能力.      

Comparative analysis of four different single-frequency PPP models on positioning performance and atmosphere delay retrieval

Single-frequency precise point positioning (SF-PPP) has attracted increasing attention due to its high precision and cost effectiveness. With various strategies to handle the dominant error, i.e., ionosphere delay, the ionosphere-float (IF), ionosphere-free-half (IFH), ionosphere-corrected (IC), and ionosphere-weighted (IW) SF-PPP models are certain to possess different characteristics and performance levels. This study is dedicated to assessing and comparing the four models from model characteristics, positioning performance, and atmosphere delay retrieval. The model comparison shows that IC and IW models are full-rank while IF and IFH models have a rank deficiency of size one that will result in biased estimations, which means the better solvability of IC and IW models. The experiments are carried out based on the 7-day Global Positioning System (GPS) observations collected at 57 global Multi-GNSS Experiment (MGEX) stations and Global Ionosphere Map (GIM) products. The results indicate that the IW model can accelerate SF-PPP convergence and achieve higher positioning accuracy compared to the other three SF-PPP models, especially in kinematic mode. With convergence criteria of 0.25 m in horizontal and 0.5 m in vertical, the east/north/up convergence times of IW model are 0.5/15.0/25.0 min and 0.5/16.0/36.5 min for static and kinematic modes, respectively. The IW model is able to achieve an instantaneous positioning accuracy of 0.28/0.35/0.75 m. In addition, a real kinematic test also demonstrates the best positioning solutions of IW model. Regarding troposphere delay retrieval, the IF, IFH, and IW models obtain a comparable daily accuracy of 3.0 cm on average, while the IC model achieves the worst accuracy of 8.0 cm. For precise ionosphere delay estimation, IW model only needs an average initialization time of 34.3 min, but a longer initialization time of 51.6 min is required for IF model. The daily precision of ionosphere delay estimation for IW model can reach up to 10.8 cm. At the present accuracy of GIM products, it is suggested that the IW model should be adopted for SF-PPP first due to its superior performance in positioning and atmosphere delay retrieval.     

一种新型沃尔什函数发生器

采用Ｔ触发器建立了一个新型沃尔什函数发生器的软硬件统一模型，并对设计时所需要的多路激励信号作了较深入的分析，归纳并证明了它们的两个重要特性－反对称特性和递推特性，实验证明，按照统一模型设计沃尔什函数发生器，可以使设计过程大为筒化，而且输出的沃尔直函数具有最小正交误差。     

A thermal activation based constitutive model for the dynamic deformation of AA5083 processed by large-scale equal-channel angular pressing

Aluminum alloy 5083 (AA5083) processed by large-scale Equal-channel angular pressing (ECAP) is an excellent engineering material with great prospects for industrial applications. An accurate assessment of the underlying constitutive relationships with easily determined material constants is critical for the predictive design and informed processing of such structural materials. To develop such a design framework, uniaxial dynamic compressive tests over a wide range of temperatures (293–573 K) were carried out for an ECAP-processed AA5083 alloy. Additionally, the microstructure before and after dynamic loading was characterized by SEM and TEM. Based on the experimental results, a new dynamic constitutive model, based on thermal activation theory, was established to describe the plastic flow behavior of the AA5083 alloy that incorporates the effects of plastic strain, temperature, and strain rate. The input parameters of the new model were determined using a particle swarm optimization (PSO) method. The model predictions show excellent agreement with experimental results, which suggests that the current predictive constitutive model is highly effective in reproducing the dynamic deformation behavior of the large-scale ECAP-processed AA5083.     

一种新的导航星选取算法研究

在导航星表的建立过程中，由于恒星的数量太多，往往要进行筛选，通常这种选择复杂费时，而结果往往并不是最优的。本文引入了动态星等阈值分布函数，将传统星等阈值过滤算法中的静态阈值用动态星等阈值代替，建立了一种新的动态星等阈值过滤选择模式。而基于统计学习理论的支持向量机方法为求解高维非线性动态星等阈值分布函数提供了新的途径。本文讨论了这种基于支持向量机的导航星自动选择算法——回归选取算法。实验表明，用该算法所选取的导航星表，导航星数量少、分布均匀性好。同时它还能适应多种任务的导航星选取要求，具有很强的通用性。