飞船返回舱跨声速全局稳定性研究

根据国内外在飞船返咽舱这类短钝飞行器的亚、跨声速风洞试验中都发现了极限环振动形态这一问题,利用全局稳定性分析和数字仿真方法,研究了返回舱在跨声速和高亚声带飞行时的动稳定性,得到与风洞试验类似的结果,即返回舱处于极限环振动形态。因此,在返回舱再入亚、跨声这飞行段,为保证飞行安全,采用有效和可靠的姿态控制系统来控制和减缓动不稳定影响是必需的。     

国外弹道导弹被动段控制技术

本文在论述弹道导弹被动段控制重大意义的基础上,阐述了国外几种型号导弹的被动段控制方法及其实施途径;介绍了再入飞行器滚动控制方法;对再入段减速的几种方案进行了探讨和分折比较。     

Atmospheric reentry hemisphere prediction for prograde orbits using logical disjunction

A unique logic-based algorithm for atmospheric reentry hemisphere prediction is presented for spacecraft in low-eccentricity, prograde low Earth orbits at altitudes of 300 km and lower. Using two-line element (TLE) data for initial orbit conditions, coupled with coarse estimates for spacecraft aerodynamic characteristics, the algorithm relies on logical disjunction operations based on a dual analysis of histogram and two-weighted Gaussian probability density function (PDF) fits of predicted reentry latitude data. The algorithm requires the execution of a series of parametric simulations to determine the reentry hemisphere for variations in spacecraft aerodynamic coefficients and drag reference area. When implemented, the algorithm yields accurate hemisphere predictions on average 15 days from reentry as demonstrated by historical reentry cases from 1979 to 2018. All reentry cases were selected to demonstrate the algorithm’s ability to deliver accurate reentry hemisphere predictions for spacecraft with varying physical size and mass, and reentering during different periods of solar cycle activity.     

Control of approach and landing phase for reentry vehicle using fuzzy logic

The reentry vehicle is affected by various disturbances such as a wind gust, atmospheric condition or aerodynamic problems in the approach and landing phase. Therefore it is necessary to design a robust control scheme. This paper presents a control scheme using Mamdani fuzzy PD controller. In this paper, the reference trajectories are generated using geometric parameters for disturbed circumstances with 4 cases: nominal, headwind and tailwind, drag increased case. Then, a Mamdani fuzzy PD controller was designed in this study. Twenty-five rules were applied in the knowledge-based system. The max–min method for a fuzzy inference system and the center-of-mass method in defuzzification were used. Finally, guidance and control simulations are performed for verification of proposed controller using generated reference trajectories. In addition, the Monte Carlo simulation is performed considering various disturbances. The results show that proposed Mamdani fuzzy PD controller has reliability and robustness for control of reentry vehicle with wind disturbance in the approach and landing phases.     

Particle swarm optimization applied to hypersonic reentry trajectories

This paper presents the novel use of the particle swarm optimization(PSO)to generate the end-to-end trajectory for hypersonic reentry vehicles in a quite simple formulation.The velocitydependent bank angle profile is developed to reduce the search space of unknown parameters based on the constrained PSO algorithm.The path constraints are enforced by setting the fitness function to be infinite on condition that the particles violate the maximum allowable values.The PSO algorithm also provides a much easier means to satisfy the terminal conditions by adding penalty terms to the fitness function.Furthermore,the approximate reentry landing footprint is fast constructed by incorporating an interpolation model into the standardized bank angle profiles.Numerical simulations demonstrate that the PSO method is a feasible and flexible tool to generate the end-to-end trajectory and landing footprint for hypersonic reentry vehicles.     

空天飞行器返回滑翔段在线制导方法

针对空天往返飞行器的返回滑翔段在线制导问题,设计了一种新的滑翔段飞行剖面,实现了滑翔段终端交班高度、位置和倾角约束的自动满足,减少了在线制导算法中需处理的约束数量.推导了滑翔段运动状态、过程约束和性能指标的解析表达式,获得了剩余航程和终端速度间的函数关系.在此基础上,提出了一种双层在线制导方法:内层解析重构飞行剖面,同...     

高度-速度剖面内再入轨迹快速规划

提出一种升力式再入航天器进入稠密大气后的轨迹规划方法。在预先设定攻角剖面的前提下,利用路径约束(驻点热流、动压和过载)在高度-速度(H-V)剖面内直接获得轨迹下边界;利用终端约束确定以轨迹下边界为基准的高度增量,进而通过下边界与高度增量的加和形成满足要求的再入轨迹。其中,增量的形式选取为分段二次型函数,其大小可通过割线法快速获得。倾斜角大小可根据纵向动力学方程反解得到,其方向依据航向误差角走廊确定。通过对典型工况的仿真,结果表明所提方法能够快速规划出再入轨迹,且适应性好。     

再入轨迹多约束模型预测静态凸规划方法

针对大升阻比可重复使用飞行器再入滑翔轨迹规划问题,提出了一种基于自适应分段Chebychev伪谱离散的多约束模型预测静态凸规划算法(P-CMPCP),实现了全量终端状态约束及多过程约束作用下再入轨迹的高精度迭代解算。考虑倾侧角翻转导致控制量不连续,传统规划方法难以同时严格满足终端位置、角度约束,且过程约束易超限,采用自适应分段伪谱离散策略,构建全程飞行状态及过程性能指标约束对各配点处控制调整量的敏感度关系,从而将非线性最优控制问题转化为静态凸规划问题,并利用内点法对各分段控制量进行了协调优化。本文所提方法无需对动力学模型进行简化或近似处理,即能以少量积分运算使轨迹满足再入全量模型约束,且控制量平滑,数值精度优于传统规划方法。     

角加速度反馈在再入段控制中的应用

针对再入飞行器滚动通道产生较大的滚动角及滚动角速率,给出了一种能够有效地减小滚动角和滚动角速率的方法。该方法引入滚动角加速度信号反馈,并采用逆系统方法设计控制器。数学仿真结果表明,引入角加速度信号后,通过对干扰力矩的补偿,可以很大程度上减小再入飞行器的滚动角和滚动角速率,滚动角可以稳定在±5°范围以内。该方法将有利于减弱通道之间的耦合,提高再入飞行器再入段控制的精度。     

再入飞行器自适应最优姿态控制

针对再入飞行器姿态控制问题,应用自适应动态规划（ADP）理论设计了姿态控制器。将再入飞行器的姿态控制建模为非线性系统的最优控制问题,提出单网络积分型强化学习（SNIRL）算法进行求解,该算法简化了积分型强化学习（IRL）算法在迭代计算中的执行-评价双网络结构,只需要采用评价网络估计值函数就可以求得最优控制律,其收敛性得到了理论证明。基于SNIRL算法设计了自适应最优控制器,并证明了闭环系统的稳定性。通过数值仿真校验了SNIRL算法比IRL算法计算效率更高,收敛速度更快,并校验了自适应最优姿态控制器的有效性 。