一种双基站低轨道区域覆盖δ星座设计

在双基站理论研究基础上 ,进行了定倾角区域性覆盖双基站δ星座设计 ,采用倾角为 41°的回归轨道 ,用点覆盖数值仿真的方法设计了对地面站与空间站的一重覆盖与二重覆盖下的星座构型。且星座中各星之间 ,各星与空间站之间均可建立星际链路 ,保证数据在空间站、地面站及星座之间连续传递     

Towards intelligent design optimization: Progress and challenge of design optimization theories and technologies for plastic forming

Plastic forming is one of enabling and fundamental technologies in advanced manufacturing chains. Design optimization is a critical way to improve the performance of the forming system, exploit the advantages of high productivity, high product quality, low production cost and short time to market and develop precise, accurate, green, and intelligent (smart) plastic forming technology. However, plastic forming is quite complicated, relating to multi-physics field coupling, multi-factor influence, multi-defect constraint, and triple nonlinear, etc., and the design optimization for plastic forming involves multi-objective, multi-parameter, multi-constraint, nonlinear, high-dimensionality, non-continuity, time-varying, and uncertainty, etc. Therefore, how to achieve accurate and efficient design optimization of products, equipment, tools/dies, and processing as well as materials characterization has always been the research frontier and focus in the field of engineering and manufacturing. In recent years, with the rapid development of computing science, data science and internet of things (IoT), the theories and technologies of design optimization have attracted more and more attention, and developed rapidly in forming process. Accordingly, this paper first introduced the framework of design optimization for plastic forming. Then, focusing on the key problems of design optimization, such as numerical model and optimization algorithm, this paper summarized the research progress on the development and application of the theories and technologies about design optimization in forming process, including deterministic and uncertain optimization. Moreover, the applicability of various modeling methods and optimization algorithms was elaborated in solving the design optimization problems of plastic forming. Finally, considering the development trends of forming technology, this paper discusses some challenges of design optimization that may need to be solved and faced in forming process.     

合成孔径雷达卫星构型设计

合成孔径雷(Synthetic Aperture Radar,简称SAR)卫星的构型与其它卫星相比具有一定的特殊性,主要体现在大面积的相控平面SAR天线在工作时需侧视(长度方向沿飞行方向)和SAR天线与太阳电池阵之间的相容性.通过分析SAR卫星构型的特点,根据卫星构型设计的原则,结合SAR卫星的构型实例,给出SAR卫星构型设计的基本思路和方法.     

Air-LUSI: A robotic telescope design for lunar spectral measurements

This paper presents the mechanical design of a new robotic telescope that was designed and built to acquire lunar spectral measurements from the science pod of NASA's ER-2 aircraft while flying at an altitude of 70,000 feet (21.34 km). The robotic telescope used a double gimbal design that allowed for target tracking in azimuth and elevation. In addition to the challenging and restrictive geometry of the science pod, each component needed to be carefully selected to ensure that they could withstand the operating conditions at high altitude such as harsh temperatures extending as low as −54 °C and atmospheric pressure less than 1.05 psi (7.23 kPa). Due to the cold temperatures, low atmospheric pressure and the likely exposure to moisture, high strength industrial linear actuators were used to create an adjustable linkage system that controlled the pointing and tracking of the telescope. Although unconventional, this allowed for a robust design that outperformed the team's expectations by tracking the Moon for 40 min with an average tracking error under 0.05°. The results presented within this paper were acquired during a first set of engineering test flights, with further scientific missions to follow.     

空调冷水变流量设计改进

本文对常规空调冷水变流量系统进行了节能分析，指出按传统设计方法设计的变水量系统不能充分发挥新技术的节能潜力，并提出了改进的设计做法。     

Design and examination of a turboprop inlet with scavenge duct

The inlet with scavenge duct is an important part of turboprop aircraft engine. This type of inlet normally has a complex shape, of which the design is challenging and directly affects the flow field quality of the engine entrance and thus the engine performance. In this paper, the parametric design method of a turboprop aircraft inlet with scavenge duct is established by extracting and controlling the transition law of the critical characteristic parameters. The inlet’s performance and internal flow characteristics are examined by wind-tunnel experiment and numerical simulation. The results indicate that a flow tendency of winding up on both sides is formed due to the induction of the inlet profile, as well as a vortex pair on the back side of the power output shaft. The vortex pair dominates the pressure distortion index on the Aerodynamic Interface Plane (AIP). In addition, with the increase of freestream angle of attack, the total-pressure recovery coefficient of the inlet increases gradually while the total pressure distortion index decreases slightly. On the basis of the experimental results under different working conditions, the parametric design method proposed in this paper is feasible.     

气动-引力辅助转移轨道研究及在星际探测中的应用

借力飞行是减小星际探测任务发射能量和总的速度增量的有效途径,然而,借力飞行前后,探测器速度矢量转角的变化往往受到借力星体体积、质量等因素的影响,而不能达到理想的要求。若在借力飞行中引入气动辅助变轨,即气动-引力辅助转移(AGA),则这一问题可以得到有效解决。现通过对AGA转移轨道的分析,给出了AGA转移轨道设计的拼接条件,此拼接条件是对AGA转移轨道进行设计和分析的重要准则。同时还以探测Ivar小行星为例,提出了一种将绘制等高线图和圆锥曲线拼接相结合的设计AGA转移轨道的方法,并给出了设计探测Ivar小行星转移轨道的参数。数值计算表明:AGA转移方法不但可以降低远程星际探测任务的发射能量和总的速度增量,而且可以找到更多的探测机会。     

径向密封设计及预紧力分析

主要描述了航天器结构设计中所采用的三种径向密封结构形式以及密封力的计算方法。在密封容器内压作用下,控制密封法兰两螺栓间的挠度变形,使两螺栓间法兰的间隙不大于0.1～0.2mm,从而达到满意的密封效果。同时,在密封实施过程中通过控制连接螺栓的拧紧力矩来确保密封法兰间的压紧力,通过紧固件的防松处理,提高法兰连接的可靠性。     

卫星总体优化设计研究

结合传统卫星总体设计思想和现代优化方法，对卫星总体优化设计的概念、研究内容进行了分析，并且提出了卫星总体优化设计流程，即：首先将用户提出的任务目标转化成任务要求，进而进行总体方案类型优选。然后在此基础上进行总体参数优化设计，最后形成满足用户任务目标和任务要求的最佳总体方案设计文件。     

捷联惯导陀螺仪冗余配置研究

为有效提高捷联惯导系统的可靠性，研究了捷联惯导陀螺仪冗余配置的原则和结构方案对比，选择及相应的可靠性评估与系统优化，通过采用加权最小二乘法等数据处理方法，给出了计算结果。结果表明工程上捷联惯导陀螺仪冗余配置应当而且能够实现系统最优化设计，选择最优配置结构。