绳系微小卫星的旋转编队飞行

针对三星编队飞行问题,提出一种绳系控制方法,在自旋刚体卫星的平衡分析的基础上,建立了Thomson和Likins Pringle平衡构形的绳系三星编队模型,通过对编队系统的稳定性分析得到了两种构形下的稳定条件,并给出了三种控制策略用以解决Likins-Pringle构形不能满足平衡条件的问题。最后经过仿真验证了理论分析的正确性,并对三种控制策略进行了检验,结果表明Thomson构形无须辅助手段,在满足特定条件下可以稳定运行,Likins-Pringle构形采用弹簧系统和喷气辅助绳系控制时满足特定条件也可以稳定运行。     

航天器机械臂柔性力控辅助装配方法

文章从装配的实际需求出发,提出一种航天器机械臂柔性力控辅助装配方法:通过在机械臂末端法兰与负载之间安装的六维力传感器感知作用力与力矩信息,人手直接作用于机械臂末端的负载,系统通过负载的重力补偿算法获得人手作用的力与力矩信息,而后以力/力矩信息作为输入来控制机械臂进行移动或转动,使负载柔性跟随人手运动。文章给出了装配方法的详细设计方案与相关算法,并进行了初步试验验证。试验表明,该装配方法可以有效提高在航天器狭小空间内进行大重量工件安装的效率,且安全可靠。     

新一代战斗机机动作战决策与仿真

近距空战要求新一代战斗机具有较好的机动性能.根据基本的空战机动模式进行机动作战决策的建模,在综合飞行/火力/推进分布式计算机实时仿真系统中,运用大机动非线性鲁棒飞行控制律进行了典型的机动作战仿真.仿真结果表明,具有大机动性能的飞机在空战过程中显示出了很好的效益优势.      

自适应模型跟踪控制在仿真伺服系统中的应用

针对飞行仿真伺服系统动态性能要求的特殊性和系统本身的非线性 ,提出了自适应模型跟踪的有效控制方法。文章在探讨参考模型选取的基础上 ,推导出一种飞行仿真位置伺服系统的自适应模型跟踪算法 ,并将其用于某一飞行仿真伺服系统。实验表明 ,该算法使系统获得了优良的动态性能 ,尤其对改善系统的频率响应 ,拓宽系统频带具有很好的效果。最后给出了部分实验结果     

电磁航天器编队悬停鲁棒协同控制方法

针对电磁航天器编队近地轨道悬停问题,提出一种在缺少参考轨道准确信息时的协同控制方法。用TH方程描述航天器间的相对运动,选择与参考轨道同周期的圆轨道为标称轨道。将参考轨道相对于标称圆轨道的偏差、地球非球形引力、大气阻力及其他天体引力等参数单独归类,视其为不确定量,构成不确定系统。通过引入一致性理论,在电磁作用模型和动力学方程均存在不确定性的条件下,针对航天器编队悬停的目标设计了鲁棒协同控制律。考虑能量消耗最优和均衡以及轨道姿态解耦,给出了通过优化进行磁矩配置的方案。仿真结果表明,所设计的鲁棒协同控制律能够实现编队电磁航天器高精度悬停,所给出的磁矩配置方案能够实现磁矩的合理分配。      

控制力矩陀螺框架高精度周期随动控制

为实现控制力矩陀螺框架伺服系统的高精度周期随动控制,采用比例积分微分(PID,Proportion Integration Differentiation)控制器结合重复控制器的控制方式,PID控制器实现框架伺服系统静态和匀速运动的高精度控制,插入式重复控制器实现对周期性输入信号的精确跟踪.对控制力矩陀螺框架系统进行了建模,设计了PID控制器与插入式重复控制器,并分析了重复控制器的稳定性条件、稳态跟踪性能和对扰动的抑制能力.仿真结果和实验结果表明:采用插入式重复控制器使控制力矩陀螺跟踪1Hz给定速度信号时的稳态跟踪误差大幅减少.PID控制器结合插入式重复控制器结构简单,两者可分开独立设计,参数设计容易.     

生产企业物流成本管理存在的问题及对策

成本控制是企业物流管理的核心,企业通过对物流成本的控制可以有效推动物流合理化进程,提高企业的经济效益.通过成本控制对企业物流管理的重要性分析并介绍了我国企业物流成本管理的现状,提出了企业物流成本管理存在的问题和生产企业物流成本控制管理的对策.     

Acceleration sensors based modal identification and active vibration control of flexible smart cantilever plate

Some flexible appendages of spacecrafts, such as solar panels, are cantilever plate structures. Thus, vibration problem is unavoidable when there is slewing maneuver or external disturbance excitation. Vibration of such cantilever plate structures includes coupled bending and torsional motion. Furthermore, the low amplitude vibration near the equilibrium point is very difficult to be quickly suppressed due to nonlinear factors of the hardware in the system, which is harmful to stability and attitude control accuracy. To solve these problems, acceleration sensor-based modal identification and active vibration control methods are presented for the first two bending and the first two torsional modes vibration of the cantilever plate. Optimal placements of three acceleration sensors and PZT patches actuators are performed to decouple the bending and torsional vibration of such cantilever plate for sensing and actuating, and identifications are achieved by experiments. A nonlinear control method is presented to suppress both high and low amplitude vibrations of flexible smart cantilever plate significantly. Experimental comparison researches are conducted by using acceleration proportional feedback and the presented nonlinear control algorithms. The experimental results demonstrate that the presented acceleration sensor-based methods can suppress the vibration of cantilever plate effectively.     

Lumped element modelling of synthetic jet actuators

In this paper, a lumped element model of synthetic jet actuator is presented and used to predict the temporal variation of the jet velocity. Unlike the previous model reported in the literature, in this model the mechanical movement of the diaphragm is decoupled from the fluid phenomenon in the actuator cavity to allow the modelling of fluid mechanics aspect of the actuator to be investigated and validated separately. Furthermore, the “minor losses” occurring at the orifice exit is included and linked to the jet exit velocity profile. The results from this model are validated using the existing experimental data and CFD simulations. It is found that this model is capable of predicting the temporal variation of synthetic jets both in phase and magnitude when the actuator is operating away from the Helmholtz resonance frequency. Although the model fails to predict the correct phase information at the Helmholtz resonance frequency, it can still produce the jet peak velocity that is in good agreement with the experimental data. The lumped element model presented in this paper can be used to provide a reliable prediction of the jet peak velocity needed in the initial design of synthetic jet actuators for practical applications.     

角伺服系统模糊自适应PID控制研究

将模糊控制和PID控制相结合,提出了一种智能复合控制策略,并将其应用于某型导弹系统角伺服系统的控制。利用模糊控制在线自适应调整PID控制器的参数,从而使系统的静态和动态性能指标较为理想。在Simulink中的仿真结果表明,这种模糊PID控制器的控制效果优于单纯的PID控制,超调量小,抗干扰性能强,对变参数系统的鲁棒性强,满足在线实时自适应控制的要求。