Development,integrated investigation,laboratory and in-flight testing of Chibis-M microsatellite ADCS

Design, analytical investigation, laboratory and in-flight testing of the attitude determination and control system (ADCS) of a microsatellites are considered. The system consists of three pairs of reaction wheels, three magnetorquers, a set of Sun sensors, a three-axis magnetometer and a control unit. The ADCS is designed for a small 10–50 kg LEO satellite. System development is accomplished in several steps: satellite dynamics preliminary study using asymptotical and numerical techniques, hardware and software design, laboratory testing of each actuator and sensor and the whole ADCS. Laboratory verification is carried out on the specially designed test-bench.In-flight ADCS exploitation results onboard the Russian microsatellite “Chibis-M” are presented. The satellite was developed, designed and manufactured by the Institute of Space Research of RAS. “Chibis-M” was launched by the “Progress-13M” cargo vehicle on January 25, 2012 after undocking from the International Space Station (ISS). This paper assess both the satellite and the ADCS mock-up dynamics. Analytical, numerical and laboratory study results are in good correspondence with in-flight data.     

一例输液反应患者护理分析及体会

本文通过对一例发生输液反应患者的护理总结 ,分析了发生输液不良反应的原因 ,提出了完善医疗护理工作的相应举措     

改善反作用轮低速性能的补偿观测器方法

基于Ｄａｈｌ摩擦模型,给出了用于卫星姿态三轴稳定控制的反作用轮低速动力学方程,就反作用轮转速过零对卫星姿态产生的扰动现象进行了分析,提出了一种利用非线性观测器估计摩擦力矩,并予以补偿的补偿观测器方法。仿真结果表明,该方法改善了反作用轮低速性能,提高了卫星姿态控制的指向精度和稳定度。     

反作用控制系统推力器失效的外部检测与诊断

通过推进系统外部可测的姿态信息,利用强跟踪滤波器和多模预报估计器,研究了一类非线性系统常值阶跃型故障和间歇性故障的检测与分离问题。对关机失效,利用强跟踪滤波器获得故障效应的估计,检测逻辑采用改进的贝叶斯分类方法,依据推力器失效效应的方向性进行故障单元的分离;对开机失效,采用多模预报,根据相应残差向量范数的比较进行故障的即时无阈值判别,同时完成了故障后系统状态的重构问题。以一类大型航天器的反作用姿态控制系统为例,对其中出现的推力器失效进行了故障识别仿真研究,表明所提方法是有效的。     

Nonlinear H∞ based underactuated attitude control for small satellites with two reaction wheels

Underactuated attitude control is supposed to be used on spacecraft when failure happens with onboard actuators. One main problem with existing underactuated attitude control designs is their limited capabilities against disturbances. In order to solve this problem, an approach based on the theory of H∞$H\infty$ is proposed in this paper. Two propositions are derived from the H∞$H\infty$ theory to improve the robustness of one popular underactuated attitude control design, which was presented by Tsiotras et al. It is proved mathematically that the controller satisfying these two propositions respectively can stabilize the underactuated attitude system locally or globally. The numerical simulations show that the improved controllers based on the H∞$H\infty$ theory could provide higher pointing accuracy for small satellites against disturbances. This validates the effectiveness of the proposed H∞$H\infty$ based approach to improve existing underactuated attitude control designs.     

Attitude Control Considering Variable Input Saturation Limit for a Spacecraft Equipped with Flywheels

A new attitude controller is proposed for spacecraft whose actuator has variable input saturation limit. There are three identical flywheels orthogonally mounted on board. Each rotor is driven by a brushless DC motor (BLDCM). Models of spacecraft attitude dynamics and flywheel rotor driving motor electromechanics are discussed in detail. The controller design is similar to saturation limit linear assignment. An auxiliary parameter and a boundary coefficient are imported into the controller to guarantee system stability and improve control performance. A time-varying and state-dependent flywheel output torque saturation limit model is established. Stability of the closed-loop control system and asymptotic convergence of system states are proved via Lyapunov methods and LaSalle invariance principle. Boundedness of the auxiliary parameter ensures that the control objective can be achieved, while the boundary parameter’s value makes a balance between system control performance and flywheel utilization efficiency. Compared with existing controllers, the newly developed controller with variable torque saturation limit can bring smoother control and faster system response. Numerical simulations validate the effectiveness of the controller.     

基于SOC的卫星姿轨控系统通用电模拟器设计

在某型卫星地面电联试过程中,对该卫星的姿态轨道控制系统进行接口分析及信号统计,针对其接口复杂性、信号多样性的特点,提出采用片上系统(Systemona Chip,SOC)芯片对所有部件模拟器进行通用化设计。文中给出了该型卫星通用型电模拟器硬件平台设计方案以及陀螺、反作用轮和通用接口模块的硬件配置说明,针对该型卫星姿态轨道控制系统电联试要求,对所有部件按真实接口配置成电模拟器,形成通用接口箱、敏感器电模拟器箱和执行机构电模拟器箱,并通过CAN(Controller Area Network)总线接入闭环仿真,对太阳捕获、地球捕获及正常模式进行了仿真测试,仿真结果表明通用电模拟器满足设计要求,对其他卫星的地面电联试有很好的参考价值。     

一种超薄反作用飞轮的大面积磁悬浮结构分析

为提高轴向磁通反作用飞轮的轴向刚度和寿命,结合轴向磁通飞轮的结构,提出一种超薄、大面积磁悬浮的反作用飞轮。重点分析该飞轮的大面积磁悬浮结构,从磁环的宽度、磁环的充磁方向、磁环间距、铁芯厚度和磁悬浮刚度五个方面展开研究。通过有限元仿真可以发现：随磁环宽度的增加,定子对转子的斥力是先增大后减小;定子内外环磁化方向相反时比相同时能得到更大的斥力;在内外环磁化方向相反时,内外环磁钢间距越小,定子对转子斥力越大;磁悬浮部分铁芯厚度的减小对定转子间的斥力的影响极其有限,但对降低飞轮重量具有重要意义;磁悬浮的刚度与转子偏离中心的距离近似成正比。     

甲烷/空气超声速燃烧流动数值模拟

用流动项与化学反应生成源项解耦处理的化学非平衡流动计算方法，从薄层近似三维N-S方程出发，采用ENO差分格式数值模拟了超声速冲压加速器简化模型中，高速甲烷气流从后体多个喷口射入高超声速空气流形成流场，研究了高温异质气体效应和19组分65反应模型的非平衡效应对冲压加速器表面压力分布的影响。计算表明新型解耦方法适合反应机理复杂的碳氢燃料超燃冲压发动机内部流动模拟，为开发应用软件系统打下基础。     

镁基水反应金属燃料的热分解性能

采用热重-差热分析联用(TG-DTA)、差示扫描量热(DSC)、加压热重(PTG)等热分析方法,研究了镁基水反应金属燃料热分解反应的基本特性及其变化规律。研究发现,燃料热分解过程中先后发生AP分解反应、HTPB分解反应,氩气中不发生Mg的氧化反应;添加催化剂、减小AP粒度、增大氧化剂与粘合剂比例、增大细Mg粉含量等,可以降低燃料中AP的分解温度T,减小表观活化能Ea,增大反应速率常数k;减小AP粒度、增大氧化剂与粘合剂比例可以降低燃料中HTPB的分解温度,减小表观活化能Ea,增大反应速率常数k;随着压强增大,AP与HTPB分解失重速率增大、AP失重百分数增大、燃料热分解凝聚相产物质量百分数减少,压强对AP分解影响较大,对HTPB分解影响较小。