美国“阿波罗”飞船的振动试验

文章介绍了美国“阿波罗”飞船的振动试验,包括环境预示、计划制定与试验技术。     

温度场对飞船压降检漏的影响与优化测试方法

文章建立了基于FLUENT平台的飞船密封舱体压降检漏的模型;计算并研究了密封舱内气体温度随环境温度的变化规律和气体温度在稳态下的空间分布规律,试验、计算结果表明了计算模型与试验模型的一致性;温度场对压降检漏影响很大,越接近平均温度的测点修正压降线性越明显,计算漏率的误差越小。     

碰撞试验系统中加速度传感器特性仿真研究

航天器对接机构缓冲能力的强弱直接决定了航天器所受冲击的大小,因此对缓冲机构的性能进行测试/试验具有重要的意义。文章以赫兹弹簧阻尼理论为依据,通过仿真计算,分析了质量、速度对碰撞过程的影响;得到了加速度的频率特性;确定了碰撞试验系统中加速度传感器的选择原则。     

嵌套阵列最大似然估计测向算法

针对在辐射源个数未知的条件下嵌套阵列难以估计多个辐射源角度的问题,提出了基于最大似然估计(MLE)的嵌套阵列角度估计算法。算法在嵌套阵列模型的基础上,首先通过推导阵列截获多辐射源信号的最大似然函数及其梯度,利用最速下降法估计出空域中所有潜在辐射源的角度;然后,通过多元假设检验,利用最大似然比与门限进行比较,确定出空域中所有潜在辐射源中某一时刻发射信号的活跃辐射源角度,排除其余噪声形成的虚假辐射源角度,解决了在辐射源个数未知条件下嵌套阵列对多个辐射源角度估计问题。仿真结果表明:与传统多重信号分类(MUSIC)算法相比,该算法在辐射源数目未知、存在相干信号、低信噪比(SNR)、低快拍数条件下,均具有较好的角度估计精度,并且算法形成的虚拟阵列自由度是空间平滑MUSIC算法的2倍;多元假设检验法比传统信源数目估计算法在低信噪比条件下和处理相干信号方面具有明显优势。     

火箭发动机推力试验装置应用范围研究

提出并研究火箭发动机推力试验装置应用范围扩大问题,即推力试验装置如何适用于推力远远小于试验装置额定负荷能力的发动机的推力试验。指出并研究了其中关键技术问题,包括试验装置机械结构与发动机的安装与配合、减小测力误差和原位校准的实现。建立了有关力学模型,分析了测力误差产生原因,并提出和论证了解决措施。研究结果表明,通过合理的设计,火箭发动机推力试验装置基本上可以用于推力小于试验装置额定负荷的任何规格的发动机的推力试验。     

数字化组合式大力值校准系统的研制

为了满足对大力值(20 MN左右)的测量和校准,开发了一套数字化组合式大力值校准装置。其最大量程可达24 MN,系统测量准确度为0.1%,适合于大型材料试验机的校准和检定。本文详细介绍了装置的组成结构、弹性体设计、贴片和组桥方式、数字化的方法以及与计算机的通信实现。     

电子对抗有效载荷地面测试与评估技术

描述电子对抗有效载荷地面测试系统的设计内容,介绍了测试系统的主要组成、功能及测试工作原理,常有的测试项目、测试方法,载荷的数据整理、评估与分析等,为以后电子对抗载荷地面系统搭建提供参考借鉴作用。     

示波器输入电容对上限截止频率测量的影响

单管放大电路是模拟电路中的一个经典实验。通过这个实验,学生可以更好地掌握静态工作点的调整和测试方法,并通过测量放大电路的主要性能指标,体会静态工作点对动态特性的影响。实验电路的上限截止频率仿真值和实测值存在较大差异,本文针对这个问题进行了详细的分析,指出示波器的输入电容是引起差异的主要原因,并进一步讨论了可有的改进测试方法。     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Numerical prediction and wind tunnel experiment for a pitching unmanned combat air vehicle

The low-speed flowfield for a generic unmanned combat air vehicle (UCAV) is investigated both experimentally and numerically. A wind tunnel experiment was conducted with the Boeing 1301 UCAV at a variety of angles of attack up to 70 degrees, both statically and with various frequencies of pitch oscillation (0.5, 1.0, and 2.0 Hz). In addition, pitching was performed about three longitudinal locations on the configuration (the nose, 35% MAC, and the tail). Solutions to the unsteady, laminar, compressible Navier–Stokes equations were obtained on an unstructured mesh to match results from the static and dynamic experiments. The computational results are compared with experimental results for both static and pitching cases. Details about the flowfield, including vortex formation and interaction, are shown and discussed, including the non-linear aerodynamic characteristics of the vehicle.