一种应用于电子印章服务的数字水印算法的研究

印章图像在实际商业交往中的应用很广泛,针对传统印章的易伪造弊端,通过将密码签名原理和数字水印技术应用于电子印章之中,实现了机密文档的防篡改功能,身份认证功能及不可否认性功能.为确保其在图片域中的安全性,采用一种新的基于DCT域的水印算法,该算法对于打印扫描过程具有较强鲁棒性,并且使水印具有良好的透明性.     

闸板式常开电爆阀密封结构的设计与仿真研究

为选择合理的闸板式常开电爆阀的结构方案,采用LS-DYNA分析软件对闸板式常开电爆阀的密封过程进行了数值仿真,得到了不同设计结构下密封零件配合时的时间、应力曲线及运动过程图.参考仿真结果选择了常开电爆阀密封结构的设计方案,并在最终的试制生产中取得了成功.     

Effect of blade sweep on inlet flow in axial compressor cascades

This paper presents comparative numerical studies to investigate the effects of blade sweep on inlet flow in axial compressor cascades. A series of swept and straight cascades was modeled in order to obtain a general understanding of the inlet flow field that is induced by sweep.A computational fluid dynamics(CFD) package was used to simulate the cascades and obtain the required three-dimensional(3D) flow parameters. A circumferentially averaged method was introduced which provided the circumferential fluctuation(CF) terms in the momentum equation.A program for data reduction was conducted to obtain a circumferentially averaged flow field.The influences of the inlet flow fields of the cascades were studied and spanwise distributions of each term in the momentum equation were analyzed. The results indicate that blade sweep does affect inlet radial equilibrium. The characteristic of radial fluid transfer is changed and thus influencing the axial velocity distributions. The inlet flow field varies mainly due to the combined effect of the radial pressure gradient and the CF component. The axial velocity varies consistently with the incidence variation induced by the sweep, as observed in the previous literature. In addition, factors that might influence the radial equilibrium such as blade camber angles, solidity and the effect of the distance from the leading edge are also taken into consideration and comparatively analyzed.     

SEP events and multi-spacecraft observations: Constraints on theory

Fifteen solar energetic particle (SEP) events have been analyzed using proton flux data recorded by the Helios 1, Helios 2, and IMP 8 spacecraft in the energy range ∼4–40 MeV during 1974–1982. For each of the events at least two of the spacecraft have their nominal magnetic footpoint within 20° in heliocentric longitude from each other. The SEP events are sub-grouped as a function of their heliocentric longitudinal separation and heliocentric radial distance from the SEP associated solar flare and several case studies are presented in this paper. Main results concerning their usage in estimating the SEP radial dependence are given. Moreover, we investigate the behavior of the third not connected spacecraft in order to study the dependence of the proton flux as a function of flare location. It is found that the contribution of the longitudinal gradient in determining variations in the SEP proton flux is particularly relevant for spacecraft having their magnetic connection footpoint separated from the flare between 30° and 50°.     

转子倾斜对交错式迷宫密封动静特性的影响

建立了交错式迷宫密封数值分析模型,并通过基于微元理论的密封动力特性系数理论识别方法研究了转子倾斜对密封动静特性的影响。结果表明：转子倾斜可降低交错式迷宫密封泄漏量,倾斜角为0.6°时泄漏量降低约2.5%,且进出口压比越大,效果越显著;转子倾斜带来的交错式密封腔室几何形状与齿径向间隙变化使得腔室在周向存在压力分布不均,且随倾斜角增加而增大;密封各腔室对系统稳定性影响规律不同,与交错式迷宫密封腔室的几何特性有关,密封腔室进口靠近转子、出口远离转子的腔室局部出现逆转动方向的速度场,能提高密封系统稳定性,而密封腔室进口远离转子、出口靠近转子的腔室则降低系统稳定性;整个密封段的有效阻尼随倾斜角增大而增大,转子在密封段中心倾斜不会降低交错式迷宫系统的稳定性。     

考虑磨损效应的指尖密封瞬态泄漏特性分析

接触式指尖密封在工作过程中不可避免地会发生磨损,而磨损又会改变其泄漏特性进而影响旋转机械的效率。为了揭示磨损对指尖密封泄漏特性的影响规律,本文在指尖密封多孔介质流动分析模型的基础之上,建立了考虑转子离心膨胀和磨损效应的指尖密封瞬态泄漏特性数值分析模型,数值研究了转速和安装过盈量对指尖密封磨损及其对应的泄漏特性的影响规律。结果表明：考虑磨损效应时,指尖密封泄漏量随磨损时间的增加呈现出先减小后增大的趋势;转子转速越低,泄漏量降低至最小值所需的磨损时间越长,但最小泄漏量及其所对应的瞬态配合过盈量始终一致;安装过盈量越小,泄漏量降低至最小值所需的磨损时间越短,但最小泄漏量所对应的瞬态配合过盈量始终一致;此外,在任意磨损时刻,密封上下游压差越大泄漏量也越大。     

后挡板结构对刷式密封泄漏特性影响实验研究

为了研究后挡板结构对刷式密封泄漏特性的影响,模拟航空发动机静态和动态工况,对三种不同后挡板结构的刷式密封泄漏特性进行实验研究。实验结果表明：相比于标准型刷式密封,后挡板结构中设计环形平衡腔能有效缓解刷式密封刷丝滞后效应,但间隙值过大将导致刷式密封性能下降;刷式密封实验件b（有环形平衡腔,与刷丝束之间的间隙为0.2mm）的泄漏参数Φ2保持在7 g﹒K1/2﹒mm/（N﹒s）以内,表现出优异的密封性能,这说明合适的环形平衡腔间隙值设计,能有效缓解刷式密封刷丝滞后现象。根据实验结果,环形平衡腔的间隙设计值应不大于0.4mm。     

几种摇臂与联动环连接结构对比分析

为了改善航空发动机整体性能和可靠性,以航空发动机从地面起动到巡航过程为研究对象,采用热-固耦合分析方法,对涡轮转子叶尖径向运行间隙(BTRRC,Blade-tip Radial Running Clearance)进行动态分析.在分析中考虑了材料属性的非线性和温度载荷、离心载荷的动态性,分别对涡轮的叶片、盘和机匣的变形进行计算和分析,得到了涡轮叶尖径向运行间隙的变化规律,以及BTRRC最小点(可选择t=180 s)和最小值(约0.18 mm),为进行进一步涡轮叶尖径向运行间隙的动态概率分析和动态优化设计奠定了基础.     

壁面导热对微型向心涡轮性能及流动影响

为了探讨传热对于微型向心涡轮的性能和流动的影响规律,根据微型向心涡轮的特点,针对涡轮的轮毂侧壁面传热现象,建立了涡轮的气动性能随传热量变化的一维模型,并利用数值模拟对模型进行了验证,分析了不同传热量下微型向心涡轮的流动变化。结果表明所发展的模型有较好的精确度,可以用以评估传热对微型向心涡轮性能的影响;较大的传热会改变转子进口相对气流角并影响转子整个通道内的流动;涡轮对外传热使得涡轮输出功降低,涡轮效率明显降低。      

Pseudo-automatic characterization of the morphological and kinematical properties of coronal mass ejections using a texture-based technique

The white light coronagraphs onboard SOHO (LASCO-C2 and -C3) and most recently STEREO (SECCHI -COR1 and -COR2) have detected a myriad of coronal mass ejections (CME). They are a key component of space weather and under certain conditions they can become geo-effective, hence the importance of their kinematic characterization to help predict their effects. However, there is still a lot of debate on how to define the event boundaries for space weather purposes, which in turn makes it difficult to agree on their kinematic properties. That lack of agreement is reflected in both the manual and automated CME catalogs in existence. To contribute to a more objective definition and characterization of white-light coronagraph events, Goussies et al. (2010) introduced recently the concept of “texture of the event”. Based on that property, they developed a supervised segmentation algorithm to allow the automatic tracking of dynamic events observed in the coronagraphs field of view, which is called CORonal SEgmentation Technique (CORSET). In this work, we have enhanced the capabilities of the algorithm by adding several new functionalities, namely the automatic computation of different morphological and kinematic parameters. We tested its performance on 57 well-studied limb CME events observed with the LASCO coronagraphs between 1997 and 2001, and compared the parameters obtained with those from three existent CME lists: two of them obtained from an observer-based detection and tracking method (i.e., two manual catalogs), and the other one based on the automated detection and characterization of the CME events (i.e., a fully automated catalog). We found that 51 events could be tracked and quantified in agreement with the CME definition. In general terms, the position angle, and the radial and expansion speeds are in agreement with the manual catalogs used for comparison. On the other hand, some discrepancies between CORSET and the automated catalog were found, which can be explained by the different delimitation of the CME angular extent.