某型无人机导轨起飞装置气液压能源系统的应用

介绍了以气囊式蓄能器和液压缸为主构成的某型无人机导轨发射装置的气液压能源系统，并对气囊式蓄能器和液压缸的动态参数特性及其匹配关系进行了理论分析计算和动态特性试验。计算和试验结果表明，该气液压能源系统所确定的气液压能转换成机械能后能够满足无人机起飞所需的动力，并在某型无人机导轨发射装置中得到了工程应用。     

加工钛合金大口径深盲孔的研究

钛合金属难加工材料,其深孔加工的难度更为突出,加工质量不易保证。本文通过实验对比,对加工钛合金大口径深盲孔中出现的偏孔、切屑堵塞、切削振动、刀具破损等主要问题进行了分析,提出了解决办法,得出了切削用量的优化参数。由于钛合金的化学亲和作用,深孔加工刀具的导向条表面易于粘附,结果拉伤已加工表面,造成表面粗糙度上升。加大导向条与孔壁的间隙虽可减少导向条表面的粘附,但同时会引起切削振动的加剧。针对这一矛盾,本文着重对加工刀具的导向条分布、导向条与孔壁的间隙以及导向条的选材方面进行了探讨,提出了以非金属导向条代替硬质合金导向条进行钛合金深孔精加工的方法,使得已加工表面的粗糙度大大降低。这些研究结果对实际加工具有一定的指导作用。     

基于流体网络法的喷管冷却气流量分配计算方法

流体网络法对喷管气膜冷却问题具有独特的优势,但难以反映出入流对冷却气流道静压变化的影响。针对此引入了可反映出入流导致静压变化的管道元件,并基于孔口速度落后角对静压变化量进行了建模。验证算例表明,这一改进使沿程静压变化趋势与实际吻合较好,使冷却气流量分配计算误差降低到0.5%以下。将改进后的流体网络法与主流通道的计算流体力学模拟耦合用于分析喷管冷却气流量分配,与全计算流体力学模拟相比结果差异小于1.2%,且大幅降低计算量;在某型喷管设计中的应用表明,可以有效反映冷却结构改变对冷却气流量分配的影响。      

Flow field design and process stability in electrochemical machining of diamond holes

The metal grille, commonly composed of an amount of diamond holes, has been grow-ingly used as a key structure on stealth aircraft. Electrochemical machining (ECM) promises to be increasingly applied in aircraft manufacturing on the condition that process stability is guaranteed. In this work, a flow field model was designed to improve the process stability. This model is endowed with a variety of flow channel features, together with vibrating feeding modes. The flow field distribution on the bottom surface of the diamond hole was discussed and evaluated as well. The numerical results show that a short arc flow channel could significantly enhance the uniformity of electrolyte velocity distribution and a vibrating feeding of the cathode enables to reduce both fluctuations of the electrolyte velocity and pressure on the bottom surface of the diamond hole. Consequently, the flow field mutations were eliminated. It is verified from the experimental results that a short arc flow channel, when combined with vibrating feeding, is capable of improving machining localization and process stability markedly. What is more, the side gap on the bottom surface of the diamond hole could also be reduced by the abovementioned approach.     

4116航天润滑油摩擦特性的影响因素

采用球盘试验机测定了4116航天润滑油在不同工况下的摩擦因数,尤其成功实现了高低温环境下的测试.应用正交试验设计方法,研究了滚动速度、滑动速度、最大工作压力和入口油温4个因素对润滑油摩擦特性的影响,并绘出各因素对摩擦因数的影响曲线.研究结果表明:滑动速度和滚动速度对摩擦因数有显著影响,入口油温和最大工作压力对摩擦因数影响不显著.摩擦因数随着滑动速度的增加而增加,但是增加的幅度随滑动速度的增加而逐渐减小;随着滚动速度的增加,摩擦因数迅速减小,当滚速高于20m/s时趋于稳定;入口油温低于0℃时,其对摩擦因数有较大影响;随最大工作压力的增加摩擦因数缓慢增加.      

Numerical simulation of aerodynamic interaction for a tilt rotor aircraft in helicopter mode

A rotor CFD solver is developed for simulating the aerodynamic interaction phenomenon among rotor, wing and fuselage of a tilt rotor aircraft in its helicopter mode. The unsteady Navier–Stokes equations are discretized in inertial frame and embedded grid system is adopted for describing the relative motion among blades and nacelle/wing/fuselage. A combination of multi-layer embedded grid and ‘‘extended hole fringe" technique is complemented in original grid system to tackle grid assembly difficulties arising from the narrow space among different aerodynamic components, and to improve the interpolation precision by decreasing the cell volume discrepancy among different grid blocks. An overall donor cell searching and automatic hole cutting technique is used for grid assembly, and the solution processes are speeded up by introduction of Open MP parallel method. Based on this solver, flow fields and aerodynamics of a tilt rotor aircraft in hover are simulated with several rotor collective angles, and the corresponding states of an isolated rotor and rotor/wing/fuselage model are also computed to obtain reference solution.Aerodynamic interference influences among the rotor and wing/fuselage/nacelle are analyzed,and some meaningful conclusions are drawn.     

日地共转扰动似稳结构及其反相和漂移规律的最新证据

日地共转扰动似稳结构及其反相现象在第２１及２２周再次显现，从而证实了上述发现是一种在长达世记的时间尺度内存在的普遍规律。包括１９９１－１９９２年内的百年地磁扰动资料还说明偶数太阳周的共转似稳结构扰动峰有逆太阳自转而线性性漂移的趋向。对即将来临的极小年前可能出现的共转扰动作了试验性的预测。     

TiAlN 涂层钻头钻削钛合金的实验研究

采用Ti Al N涂层硬质合金麻花钻对钛合金(TC4)进行钻削试验,研究了切削用量对轴向力、加工孔壁表面粗糙度和切屑形态的影响。结果表明:轴向力随着进给量的增加而增加,轴向力随着转速的增加而减小。运用指数公式模型对轴向力实验结果进行回归分析,得到轴向力与转速以及进给量之间的关系式,并对该方程进行了检验验证误差均小于7%;随着进给量的增加断屑能力逐渐增加,切屑长度逐渐变短。在低转速和进给量为50 mm/min时切屑形态为短螺旋形切屑,此时排屑和孔壁粗糙度均为最佳。     

Numerical studies of static aeroelastic effects on grid fin aerodynamic performances

The grid fin is an unconventional control surface used on missiles and rockets. Although aerodynamics of grid fin has been studied by many researchers, few considers the aeroelastic effects.In this paper, the static aeroelastic simulations are performed by the coupled viscous computational fluid dynamics with structural flexibility method in transonic and supersonic regimes. The developed coupling strategy including fluid–structure interpolation and volume mesh motion schemes is based on radial basis functions. Results are presented for a vertical and a horizontal grid fin mounted on a body. Horizontal fin results show that the deformed fin is swept backward and the axial force is increased. The deformations also induce the movement of center of pressure, causing the reduction and reversal in hinge moment for the transonic flow and the supersonic flow,respectively. For the vertical fin, the local effective incidences are increased due to the deformations so that the deformed normal force is greater than the original one. At high angles of attack, both the deformed and original normal forces experience a sudden reduction due to the interference of leeward separated vortices on the fin. Additionally, the increment in axial force is shown to correlate strongly with the increment in the square of normal force.