弹载遥测系统总体关键技术的研究与应用

弹载遥测系统主要用于导弹飞行试验过程中,完成导弹飞行试验数据的采编、调制、传输,与地面遥测设备配合完成试验数据远距离获取,即遥测任务。遥测数据为导弹及分系统设计验证、故障分析、试验结论评判等提供数据依据,是导弹研制过程中极其重要、必不可少的测量系统。结合导弹遥测系统技术发展趋势及笔者近年来创新性工程设计经验,详细阐述了包括弹载遥测系统架构设计、可编程式采编技术、优化供电技术及射频综合化技术等总体关键性技术,为弹载遥测系统提供总体设计新思路。     

企业技术创新的内外源双驱动力因素

企业技术创新活动是一个复杂的过程,受来自企业内外部多种因素的综合作用影响。研究技术创新的内外源动力因素,对于解决企业技术创新过程中的制约要素与推动技术创新活动的顺利进行,不仅有理论上的价值,还具有重要的现实意义。     

Assessment of the suitability of public mobile data networks for aircraft telemetry and control purposes

This paper provides a review of the state of the art of relevant work on the use of public mobile data networks for aircraft telemetry and control proposes. Moreover, it describes the characterisation for airborne uses of the public mobile data communication systems known broadly as 3G. The motivation for this study was to explore how this mature public communication systems could be used for aviation purposes. An experimental system was fitted to a light aircraft to record communication latency, line speed, RF level, packet loss and cell tower identifier. Communications was established using internet protocols and connection was made to a local server. The aircraft was flown in both remote and populous areas at altitudes up to 8500 ft in a region located in South East Queensland, Australia. Results show that the average airborne RF levels are better than those on the ground by 21% and in the order of −77 dbm. Latencies were in the order of 500 ms (1/2 the latency of Iridium), an average download speed of 0.48 Mb/s, average uplink speed of 0.85 Mb/s, a packet of information loss of 6.5%. The maximum communication range was also observed to be 70 km from a single cell station. The paper also describes possible limitations and utility of using such communications architecture for both manned and unmanned aircraft systems.     

动力系统试验台充气系统优化设计

某试验台承担了多项运载火箭动力系统的试验任务,试验前需要对箭上气瓶进行充气.由于箭上所带气瓶个数较多,充气压力较高,充气所需时间较长,操作人员工作量较大.同时,满足总体单位充气速率要求的难度较大.为了解决以上难题,借助AMESim软件对地面工艺系统进行仿真,获得箭上气瓶充气流量及地面气源压力的变化情况.根据仿真结果进行优化设计,通过在试验系统上增设孔板和增加数显二次仪表等针对性措施,实现了箭上气瓶充气速率在线调节的功能.对气瓶充气流程进行优化,充气气源采取高、低压切换逐瓶供应的方式.经动力系统试验考核,验证了系统优化设计的有效性.     

A New Probabilistic Transformation in Generalized Power Space

The mapping from the belief to the probability domain is a controversial issue, whose original purpose is to make (hard) decision, but for contrariwise to erroneous widespread idea/claim, this is not the only interest for using such mappings nowadays. Actually the probabilistic transformations of belief mass assignments are very useful in modern multitarget multisensor tracking systems where one deals with soft decisions, especially when precise belief structures are not always available due to the existence of uncertainty in human being's subjective judgments. Therefore, a new probabilistic transformation of interval-valued belief structure is put forward in the generalized power space, in order to build a subjective probability measure from any basic belief assignment defined on any model of the frame of discernment. Several examples are given to show how the new transformation works and we compare it to the main existing transformations proposed in the literature so far. Results are provided to illustrate the rationality and efficiency of this new proposed method making the decision problem simpler.     

电压变化时Boost PFC变换器的混沌和分叉现象

利用小信号模型对开关电源控制器进行设计过程中常出现混沌分叉等不稳定现象。以工程设计的角度,建立了平均电流型BoostPFC的精确电路模型,分析了系统中存在的非线性现象,结合非线性分叉和混沌理论对这类非线性现象进行了详细的分析和推导。     

航空发动机陆用改型设计与分析

本文针对航空发动机开展陆用改型研究,首先分析了由简单到复杂的几种技术方案,然后对某型涡扇发动机进行总体热力学计算分析,在此基础上采用内外涵混合气流后直接加装动力涡轮的方案进行准三维气动设计,动力涡轮的全三维流场校核效果良好,达到了方案设计要求.此外还对其它几种典型的航空发动机进行了陆改方案设计.计算结果表明:退役发动机...     

基于随机减量的运行模态频域分析方法

以高层建筑、大跨桥梁等难以进行人工激励的大型复杂结构为对象,提出并实现了一种基于随机减量技术和复模态指示因子函数法的新型频域运行状态模态参数识别方法.由随机运行响应估计随机减量函数,然后通过时频域变换得到频域的半功率谱密度函数,并用复模态指示因子函数法从半功率谱密度函数中识别结构模态参数.最后对1个三维空间结构模型进行算法验证,得到相应的各阶模态参数,证明了将随机减量技术和复模态指示因子函数法相结合的方法识别大型结构模态参数的有效性和合理性.     

空间相机上第二代红外探测器驱动电压供电电路设计

文章以空间相机应用为目的,在分析第二代红外探测器驱动电压与输出信号之间相关性的基础上,以某型号第二代红外探测器驱动电压供电电路设计为例,采用高稳定基准电压芯片和低噪声低频运算放大器作为核心器件,提出了以负反馈或电压跟随的电路形式稳定驱动电压供电的方案,并对该方案进行了仿真分析与实验验证.测试结果证实该方案可行有效,能满...     

基于随机时延的弹射式干扰研究

针对传统噪声压制技术对合成孔径雷达形成有效干扰需要功率比较大的特点,研究了一种随机时延的弹射式干扰方法。该方法是在传统的弹射式干扰基础上,采用随机的干扰机转发时延。由于采用随机时延,方位向不同的回波时延不同而不能被压缩,干扰信号的距离向的压缩虽能成像,但已经是随机分布的。改进后的弹射式干扰能够覆盖整个成像区域,形成类噪...