MANEUVERING TARGET TRACKING USING FUZZY COMPENSATOR

Ｔｈｅｍａｎｅｕｖｅｒｉｎｇｔａｒｇｅｔｓｔｒａｊｅｃｔｏｒｙｅｓｔｉｍａｔｉｏｎｐｒｏｂｌｅｍｈａｓｂｅｎａｎｉｍｐｏｒｔａｎｔｔｏｐｉｃａｎｄｍａｎｙｆｒｕｉｔｆｕｌｒｅｓｕｌｔｓｈａｖｅｂｅｅｎａｔａｉｎｅｄ．Ｉｔｉｓｂｏｔｈｔｈｅｋｅｙａｎ...     

机载蒸发循环系统动态仿真

从部件的数学模型出发,根据闭环系统各部件的耦合关系,建立了机载蒸发循环系统的动态数学模型。对充注R142b的机载蒸发循环系统进行了动态仿真,仿真数据与试验数据基本吻合,仿真方法可靠,可以作为机载蒸发循环系统优化及系统控制的依据。     

基于构型管理的飞机技术出版物数据结构研究

在飞机复杂产品的整体结构基础上,依据S1000D规范,采用模块化技术,建立技术出版物的三层数据结构,保证数据的重用性和一致性,便于技术出版物的构型控制管理。     

连接参数对Ti53311S 高温钛合金TLP 连接接头性能的影响

采用Cu作为中间层实现了Ti53311S合金的TLP连接,通过SEM、EDS方法分析了接头界面的微观组织,研究了接头界面微观组织及力学性能随TLP连接温度及保温时间的变化规律。结果表明:TLP连接接头的典型界面结构为Ti53311S/β-Ti/Ti、Cu(Sn)金属间化合物/β-Ti/Ti53311S。随着TLP连接温度的升高或保温时间的增加,焊缝宽度逐渐增加,Cu元素向母材侧的扩散程度更加充分,化合物相分解消失,接头室温抗拉强度先大幅升高后趋于稳定,连接工艺为980℃/20 min时,接头抗拉强度达到最大值899 MPa。     

多喷口环量控制翼型流动的研究

提出了多喷口环量控制翼型的想法，并进行了数值研究。结果表明，多喷口环量控制方法可以在中、小Ｃμ吹气时提高翼型的升力和减小能耗，并能改善环量控制翼型在较高来流马赫数下的气动性能，避免“压缩性失速”。     

S5 0716+714: GeV variability study

The GeV observations by Fermi-LAT give us the opportunity to characterize the high-energy emission (100 MeV–300 GeV) variability properties of the BL Lac object S5 0716+714. In this study, we performed flux and spectral analysis of more than 3 year long (August 2008 to April 2012) Fermi-LAT data of the source. During this period, the source exhibits two different modes of flux variability with characteristic timescales of ∼75 and ∼140 days, respectively. We also notice that the flux variations are characterized by a weak spectral hardening. The GeV spectrum of the source shows a clear deviation from a simple power law, and is better explained by a broken power law. Similar to other bright Fermi blazars, the break energy does not vary with the source flux during the different activity states. We discuss several possible scenarios to explain the observed spectral break.     

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System

Fronts and thermohaline structure of the Brazil–Malvinas Confluence System (BMCS) are studied from climatic data, “Marathon Exp. Leg.8, 1984” data, and Sea surface temperature (SST) data base “ds277-Reynolds” (1981–2000). The South Atlantic Central Water (SACW) is divided in two main types: tropical (TW) and subtropical water (ST). Water masses, Fronts, Inter-Frontal and Frontal Zones are analysed and classified: (a) the water masses: Tropical Low-Salinity Water, Tropical Surface Water, Tropical Tropospheric Water, Subtropical Low-Salinity Water, Subtropical Surface Water, Subtropical Tropospheric Water. T,S characteristics of intermediate, deep and bottom water defined by different authors are confirmed and completed; (b) the Inter-Frontal Zones: Tropical/Brazil Current Zone, Subtropical Zone and Subantarctic Zone; (c) the Frontal Zones: Subtropical, Subantarctic and Polar, and (d) the Fronts: Subtropical Front of the Brazil Current, Principal Subtropical Front, North Subtropical Front, Subtropical Surface Front, South Subtropical Front, Subantarctic Surface Front, Subantarctic Front and Polar Front. Several stable T–S relationships are found below the friction layer and at the Fronts. The maximum gradient of the oceanographic characteristics occurs at the Brazil Current Front, which can be any of the subtropical Fronts, depending on season. Minimum mean depth of the pycnocline coincides with the Fronts of the BMCS, indicating the paths of low-salinity shelf waters into the open ocean. In the work it is shown how to recover the horizontal and vertical thermohaline structure of waters from satellite data RSMAS SST.     

飞机结构修理手册编制研究

首先介绍了飞机结构修理手册的编制要求和编制依据,其次分别阐述了依据ATA2200和S1000D标准进行飞机结构修理手册编写的方法,最后比较两种标准的特点,并对大型客机结构修理手册的编制工作提出了初步建议。     

网络化数据采集系统的设计

介绍了网络测控中高速数据采集系统的设计，以及利用LabWindows/CVI建立网络化数据采集系统的方法，该方法把分布的测量系统变为集中的网络测控系统，并为实现遥测遥控提供了一条思路，该设计方案直接建立在网络应用层，不用考虑网络底层硬件，有利于简化设计方案和节约资源。     

浅析Blob在S3C44B0上的移植

嵌入式Linux系统通常由三部份组成:Bootloader、Kernel和File System,其中Bootloader的任务是为调用Kernel准备必要的软硬件环境。Blob是一款功能强大的Bootloader,本文介绍了Blob的运行过程和整体结构,同时给出将Blob移植到基于S3C44B0目标板的过程,并对移植过程中的关键代码进行了分析,为项目的后续开发打下基础。