基于三维场路协同方法的静电损伤仿真测试平台

静电放电已经逐渐成为导致各类电子设备故障的主要原因之一,在电子产品研制过程中通常采用实物测试方式检验产品抗静电能力,但该方式耗费资金过大、可重复性差同时易损伤受试设备。在这种情况下,建立基于三维场路协同方法的静电损伤仿真测试平台有效地解决了上述问题。该平台以电脑仿真技术（CST）软件为基础,通过构建静电放电枪模块,结合受试设备模块和仿真参数设置模块,以时域有限积分法求解器进行仿真,并利用数据输出和处理模块得出结果。利用建立好的仿真测试平台对一台数据传输设备进行8 kV接触放电,观察其表面电流和磁场分布,并对其造成的传导干扰和辐射干扰进行分析。通过建立静电损伤仿真测试平台,实现了静电放电测试的可重复以及无损伤的目的,具有较强的工程指导意义。      

液体火箭可贮存推进剂泄出速度影响因素分析

为提高液体火箭可贮存推进剂泄出速度,缩短泄出时间,通过分析泄出过程中推进剂流动状态及能量变化,建立了推进剂泄出速度的数学模型,按照实际设定参数计算了泄出量,计算结果与实际泄出吻合,并依据模型分析了相关因素对泄出速度的影响程度。结果表明：泄出转接波纹软管管径是影响泄出速度的主要因素,增加软管管径可显著缩短泄出时间;同时,贮箱气枕压力对泄出速度同样具有明显的影响。     

Effect of tube-electrode inner diameter on electrochemical discharge machining of nickel-based superalloy

Nickel-based superalloys are widely employed in modern aircraft engines because of their excellent material characteristics, particularly in the fabrication of film cooling holes. How-ever, the high machining requirement of a large number of film cooling holes can be extremely chal-lenging. The hybrid machining technique of tube electrode high-speed electrochemical discharge drilling (TEHECDD) has been considered as a promising method for the production of film cooling holes. Compared with any single machining process, this hybrid technique requires the removal of more complex machining by-products, including debris produced in the electrical discharge machin-ing process and hydroxide and bubbles generated in the electrochemical machining process. These by-products significantly affect the machining efficiency and surface quality of the machined prod-ucts. In this study, tube electrodes in different inner diameters are designed and fabricated, and the effects of inner diameter on the machining efficiency and surface quality of TEHECDD are inves-tigated. The results show that larger inner diameters could effectively improve the flushing condi-tion and facilitate the removal of machining by-products. Therefore, higher material removal efficiency, surface quality, and electrode wear rate could be achieved by increasing the inner diam-eter of the tube electrode.     

ZrO2陶瓷热障涂层显微结构及隔热性能研究

用电子束物理气相沉积法(EB-PVD)在DZ125高温合金上制备Y2O3部分稳定化的ZrO2(YSZ)陶瓷热障涂层,并用扫描电镜(SEM)观察涂层显微结构.采用激光脉冲法对EB-PVD热障涂层的热扩散系数进行测试.为防止热扩散系数测试时激光穿透ZrO2陶瓷层,在试样表面制备不同材料的遮挡层.结果表明,EB-PVD热障涂层呈明显的柱状晶结构,柱状晶垂直于涂层/基体界面.基体的热扩散系数随温度的升高而急剧增加,陶瓷热障涂层的热扩散系数随温度的升高呈下降趋势,但变化幅度不大.室温下陶瓷层的热扩散系数小于基体的1/3,1200℃时约为基体的1/67.试样的激光遮挡层很好解决了激光脉冲法测试涂层热扩散系数时的不稳定性和激光穿透问题.在满足遮挡要求的条件下,遮挡层材料种类对热扩散系数测试无明显影响.     

Operating characteristics of a high radius pre-swirl cooling system

An experimental investigation into pre-swirl effectiveness and receiver hole discharge coefficient characteristics for a high radius injection pre-swirl cooling systems was carried out on a physically representative experimental rig with a 450 mm diameter rotor.The receiver holes and pre-swirl nozzle were located at a radius of 181 mm and 180 mm respectively.The experimental work was mainly conducted at 5 000～12 000 r/min,4 bar absolute pressure and 1.132 kg/s air supply.The maximum air supply temperature was 190 ℃.Pressure and temperature distributions in the pre-swirl system were examined with an emphasis on the velocity effectiveness of the pre-swirl system as a whole and on the discharge coefficients of the rotating 'receiver holes' in the rotor.The results showed that the velocity effectiveness increased with increasing swirl ratio resulting in reduced blade cooling flow temperature.Different seal flow configurations caused very different effectiveness at different speeds,but outflow through the inner and outer seals always gave the highest effectiveness compared other configurations.Increasing the seal flow rate reduced the effectiveness.For the coefficient of discharge,except for the low speed range,it increased with increase in swirl ratio for most speeds.      

航天器表面电荷激发空间静电场规律研究

从带电表面微元出发,通过求解泊松方程,得到带电介质平板表面邻近空间静电势的解析表达式,建立介质表面电位-介电常数模型,求得了带电介质平板表面电位、表面带电量和介质介电常数三者之间的关系式。结合典型的航天器表面介质材料带电案例,对此类圆盘结构介质平板带电问题进行了仿真分析,结果表明,在介质材料表面电位一定的情况下,表面电荷激发的空间静电势值随距离的增大而减小,并且距离介质表面越近,电势的空间变化率越大;在介质材料带电量相等的情况下,介质表面电位随着介质介电常数的增大而减小,并逐渐趋于一个稳定值,所以在一定范围内选择介电常数较大的介质材料可以降低介质的表面电位,减小介质间发生静电放电的几率。     

PVA浓度对电纺制备ZnO纳米纤维吸波性能的影响

采用静电纺丝法制备ZnO纳米纤维,研究聚乙烯醇(PVA)浓度对ZnO纳米纤维微观形貌、介电性能和吸波性能的影响规律。结果表明:随着PVA浓度从6%增至10%,ZnO纳米纤维直径变细,但珠结增加,粗细不均。当PVA浓度为8%时,ZnO纳米纤维直径较细、粗细均匀、表面光滑、珠结较少,形貌最好。此时,其介电常数达到最高值,实部为15.4~20.8,虚部为3.6~4.7,并在较薄的厚度下具有最优的吸波性能。当70%(质量分数/%,下同)ZnO纳米纤维/石蜡样品的厚度为1.3 mm时,反射率低于–5 dB的吸收带宽达到5.4 GHz(12.6~18 GHz),最小反射率为–16.6 dB。此外,石蜡含量也对样品的介电性能和吸波性能具有重要影响,随着石蜡含量的增加,样品的介电常数降低,当石蜡含量为30%和20%时,样品具有较好的吸波性能。     

燃烧室头部激励的等离子体强化燃烧特性实验研究

等离子体助燃是一种新型的强化燃烧技术,近年来受到国内外学者的广泛关注。本文开创性地研制了基于旋转滑动弧等离子体的强化燃烧头部,建立了某型航空发动机三头部燃烧室实验件的等离子体助燃实验平台,验证了该等离子体强化燃烧技术应用于型号发动机燃烧室的可行性。实验研究等离子体助燃在不同余气系数和不同输入电压条件下对平均出口温度、燃烧效率、温度分布系数以及熄火边界的影响。实验结果表明,与正常燃烧相比,施加等离子体助燃后的燃烧效率有明显的提高,在输入电压为U0=240V,余气系数为 α=0.8时,等离子体助燃的燃烧效率提高3.24%。实施等离子体助燃后,燃烧室出口温度分布场分布得到明显的改善,在富油工况α=0.8,出口温度分布系数减少39.8%。等离子体助燃输入电压越高熄火边界扩展程度越明显,相比于正常工况条件下,等离子体助燃U0=240V的熄火边界扩宽了7.34%。     

梯度热障涂层的设计

 采用电子束物理气相沉积方法 (EB PVD)制备了梯度热障涂层,其结构设计为NiCoCrAlY粘结层 /Al₂O₃ YSZ过渡层 /YSZ陶瓷层。YSZ陶瓷层的结构为柱状晶结构,Al₂O₃ YSZ梯度过渡层为梯度微孔结构。采用有限元方法对梯度热障涂层进行热应力分析,优化了Al₂O₃ YSZ梯度过渡层的组成。计算结果表明,梯度涂层的内应力显著降低,而且界面及其附近应力和应变变化较平缓。过渡层厚度的增加有利于降低涂层内应力和缓和涂层界面处的应力集中。     

用自由空间法测量材料复介电常数的研究

分析电磁波在自由空间通过平板电介质材料的传播特性,得到了散射参数与复介电常数之间的关系式和求解复介电常数的三种表达式,并对三种表达式分别进行误差分析.解决自由空间法测量电介质材料复介电常数的不稳定性问题和相位模糊性问题.建立测试系统,并在X波段对平板电介质材料进行测量.实验结果表明,本测试方法和测试系统是正确的.