基于速度预测的导引律剩余时间估计

将分段线性逼近与迭代求解的思想扩展到对导弹的时变速度进行分段预测,给出了适用于反舰导弹速度时变情况的大前置角下比例导引律和偏置比例导引律的剩余时间估计算法。该算法在现有分段迭代算法的基础上,依据闭环形式的反舰导弹速度微分方程,分转弯平飞段和近似直线飞行段2种情况,对导弹未来速度的大小进行分段迭代预测并对剩余时间估计进行修正。算法中还给出了偏置比例导引律作用下近似直线飞行段剩余飞行航程的估计公式。仿真结果验证了本文算法的有效性。     

基于光学测角数据的风云四号同步轨道卫星精密定轨

针对风云四号同步卫星的精密定轨和精度评估需求,首先利用地面光学测角数据对FY-4A卫星进行精密定轨,定轨后方位角和高度角的残差rms分别为0.25＂和0.45＂。与基于测距数据的轨道相比,位置精度在有测角数据的弧段内小于50m。进一步联合测角数据和测距数据对FY-4A卫星进行联合定轨,定轨后轨道重叠精度优于15m。利用联合定轨结果评估了基于测距数据的实时轨道产品精度,可以明显发现轨道精度随着测距数据的积累而逐步提高。     

共聚焦三维数据表面重建的一种反走样方法

用边界体素的集合表示物体表面,将边界体素作为点投影到屏幕上形成光照图像时,可能出现空洞和图像走样.改进了体素表面算法:用剖分立方体算法得到物体的边界体素集,然后用边界体素的中心点构造投影表面点,用脚印函数计算表面点对显示图像平面上像素的影响范围,以此值作为该像素的权值,形成最后的图像.这样,边界体素不是只投影到一个点上,而是有一个投影区域,从而避免空洞现象,并减轻走样现象.实验证明,该方法具有较快的表面重建速度,消除了空洞,改善了显示效果.     

An adaptive fast fixed-time guidance law with an impact angle constraint for intercepting maneuvering targets

Sliding mode guidance laws based on a conventional terminal sliding mode guarantees only finite-time convergence, which verifies that the settling time is required to be estimated by selecting appropriate initial launched conditions. However, rapid convergence to a desired impact angle within a uniform bounded finite time is important in most practical guidance applications. A uniformly finite-time/fixed-time convergent guidance law means that the convergence (settling) time is predefined independently on initial conditions, that is, a closed-loop convergence time can be estimated a priori by guidance parameters. In this paper, a novel adaptive fast fixed-time sliding mode guidance law to intercept maneuver targets at a desired impact angle from any initial heading angle, with no problems of singularity and chattering, is designed. The proposed guidance law achieves system stabilization within bounded settling time independent on initial conditions and achieves more rapid convergence than those of fixed-time stable control methods by accelerating the convergence rate when the system is close to the origin. The achieved acceleration-magnitude constraints are rigorously enforced, and the chattering-free property is guaranteed by adaptive switching gains. Extensive numerical simulations are presented to validate the efficiency and superiority of the proposed guidance law for different initial engagement geometries and impact angles.     

非均质壁面对液滴俘获能力的数值模拟研究

为研究不同非均质壁面对液滴的俘获能力,采用界面追踪法（FTM）结合广义滑移边界建立了接触角模型,对液滴在非均匀润湿的非均质壁面上的运动过程进行了数值模拟研究。液滴在倾斜壁面上受到重力作用由均匀润湿部分下滑至非均匀润湿部分,通过改变Bo数、Oh数、非均匀润湿程度研究了液滴在非均匀润湿区域的运动规律。研究表明:Bo数越大,液滴运动受壁面阻力影响越小,液滴下滑的速度越快,液滴越难以被俘获;Oh数越大,液滴运动受壁面阻力影响越小,液滴越难以被俘获;非均匀润湿程度越大,非均质壁面对液滴的阻力越大,液滴越易被俘获。      

转子叶栅非同步振荡发声特性研究

轴流压气机转子叶片排振荡疲劳失效是常见的气动弹性失稳问题。当转子叶栅处于非同步振荡状态下时,压气机管道内部将伴随着异常噪声的产生,这类噪声的频率既不是分布在叶片通过频率及其谐波上,也不是分布在转子轴频率及其谐波上,同时也不满足简单多普勒效应。为了解释这种异常噪声现象,以三维升力面理论为基础,讨论叶片对其附近流体施加非定常载荷的发声问题,给出了转子叶栅振荡异常发声问题的物理解释,建立了声场频率及模态特性与转子声源特性的直接关系式,并给出了频率特性不同于叶片通过频率且不符合简单多普勒效应的完整解释。在此基础上,通过机理性实验研究证实了该模型的正确性。实验结果表明,理论预测声场的频率和周向模态特性与实验结果完全一致。     

双U型管束模型换热器的流动和传热特性

为了研究双U型管束模型换热器的流动和传热性能,通过低速高温风洞的模型实验和Fluent-CFD数值计算,得到了换热器的管型和安装角对换热器压降和回热效率的影响规律。结果表明:在相同的双U型管管内气流平均流动速度下,椭圆管换热器的管内流动压降高于圆管换热器的,相对增加幅度在50%~60%之间;对于外部流动,换热器安装角度增大所诱导的外部流动压降显著增加,在换热器30°的安装角下,椭圆形管束的低阻流动型面得以充分体现,其外部流动压降较圆形管束换热器可以降低约50%;随着换热器安装角的增加,换热器回热效率具有明显的提高;相对换热器安装角,换热器管型对回热效率的影响较小,集气管的进气-出气方式对双U型管束换热器的回热效率具有较显著的影响。     

基于经验模分解的PPP时间比对数据消噪方法

精密单点定位(PPP)时间比对数据会受到观测噪声的影响,因此对时间比对数据进行消噪是一项重要工作。提出一种基于经验模分解(EMD)的PPP时间比对数据消噪方法,并将该方法与Vondrak滤波方法的消噪效果进行对比。结果表明,两种方法的消噪效果相当,均能有效滤除PPP时间比对数据中的随机噪声,明显改善时间比对的稳定度。     

双后掠鸭翼气动特性的数值模拟

首先针对具有中等前缘后掠角梯形鸭翼的缺点提出双后掠鸭翼概念,然后分别对安装梯形鸭翼和双后掠鸭翼的近距耦合鸭式布局的气动性能进行数值模拟研究,分析影响双后掠鸭翼气动性能的流动机理。研究表明：在大迎角时,对于双后掠鸭翼,具有较大前缘后掠角的外翼段可以使鸭翼涡在涡核破裂后仍能形成稳定集中涡并保持较高的强度,增加鸭翼本身的失速迎角,并通过诱导作用改善机翼外翼段流场,进而提高全机大迎角性能,但在小迎角时会破坏鸭翼附着流或前缘气泡涡的发展,造成略微的升力损失。拥有较大失速迎角的双后掠鸭翼在小迎角时具有较大的可用偏度,可以增强布局的抬头控制能力。双后掠鸭翼在满足隐身约束的前提下,超声速阻力较小,具有较好的超声速性能。     

The impact of orbital errors on the estimation of satellite clock errors and PPP

Precise satellite orbit and clocks are essential for providing high accuracy real-time PPP (Precise Point Positioning) service. However, by treating the predicted orbits as fixed, the orbital errors may be partially assimilated by the estimated satellite clock and hence impact the positioning solutions. This paper presents the impact analysis of errors in radial and tangential orbital components on the estimation of satellite clocks and PPP through theoretical study and experimental evaluation. The relationship between the compensation of the orbital errors by the satellite clocks and the satellite-station geometry is discussed in details. Based on the satellite clocks estimated with regional station networks of different sizes (∼100, ∼300, ∼500 and ∼700 km in radius), results indicated that the orbital errors compensated by the satellite clock estimates reduce as the size of the network increases. An interesting regional PPP mode based on the broadcast ephemeris and the corresponding estimated satellite clocks is proposed and evaluated through the numerical study. The impact of orbital errors in the broadcast ephemeris has shown to be negligible for PPP users in a regional network of a radius of ∼300 km, with positioning RMS of about 1.4, 1.4 and 3.7 cm for east, north and up component in the post-mission kinematic mode, comparable with 1.3, 1.3 and 3.6 cm using the precise orbits and the corresponding estimated clocks. Compared with the DGPS and RTK positioning, only the estimated satellite clocks are needed to be disseminated to PPP users for this approach. It can significantly alleviate the communication burdens and therefore can be beneficial to the real time applications.