Impact of DORIS ground antennas environment on their radio signal quality

Among the factors which may disrupt the DORIS measurements quality, the ground antennas environment is of high importance. For a set of 15 selected DORIS beacon, the differences between the effective and theoretical power received on-board the satellites (SPOT-5 and Envisat) have been analyzed in terms of spatial direction around the antenna. Such antenna maps have also been established regarding the Doppler residuals of the least-square precise orbit adjustment. Thanks to 360° views from the antennas and aerial views of the sites, the impact of the signal obstructions (trees, roofs, antennas …) on power attenuation and Doppler residuals is discussed. Depending on the nature of the obstructed object, the attenuation level can reach more than 5 dB, and the residual RMS of the orbit adjustment may be doubled from the nominal value, reaching 1 mm/s locally. The nature of the ground at the foot of the antennas has been correlated to DORIS signal quality at high elevation: reflections on flat surfaces (e.g. roofs) affect the signal more significantly than reflections on natural ground (e.g. soil). In particular, a modeling of the multipath phenomenon affecting Fairbanks site has been established and fits remarkably with the observations. Finally, an evaluation of the direct impact of obstructing objects on the orbit has also been performed. The example of a scaffolding at Kauai site displays a few millimeters error in the along-track position of the satellite.     

Experimental investigation of flow and distortion mitigation by mechanical vortex generators in a coupled serpentine inlet-turbofan engine system

The performance of compact, aggressive ducts in advanced propulsion systems is limited by the internal flow separation coupled with the formation of secondary counter-rotating vortices that give rise to intensive flow distortions at the duct exit. An experimental investigation was conducted to study the flow field and passive suppression of flow separation and Aerodynamic Interface Plane (AIP) distortion in a serpentine air inlet duct. Tests were performed by a turbofan engine at several Engine Operating Points (EOPs) from 56% (idle) to 100% (max). A large total pressure deficit region arose at the upper part of the AIP, which was associated with the upper surface flow separation. Using the new mechanical S-type vortex generators in two longitudinal positions (VG1 and VG2), separation and loss were diminished at the upper part of the duct and AIP. The VG2 arrangement attained the maximum reductions in distortion coefficients which were 73.72%, 60.7% and 37.8% in DC(90°), DC(60°) and ΔP_C/P metrics, respectively. In the next step of the study, some unsteady aspects of the flow field were analyzed inside the duct. The separation onset and reattachment points were determined by the standard deviation of static pressure on the upper surface. The AIP spectral distribution showed that the boundary of low pressure and high pressure recovery regions was dominated by the maximum fluctuations. Furthermore, the PSD diagram of several probes at AIP revealed the vortex shedding frequency and its higher harmonics at separation region. The energy content of distinct unsteady spectral features in the bare configuration was significantly reduced using VGs, which showed the improvement of flow at the duct exit.     

USB在雷达功率测试中的应用研究

介绍了外设使用USB口进行雷达功率测试的优点，USB通信机制和外设开发过程，一种雷达功率测试模块的设计结构和性能指标，以及应用软件开发及其通信用的两个关键API函数。     

一种基于单定向耦合器比较法的8 mm小功率校准系统

介绍了一种基于单定向耦合器比较法组建的8mm小功率校准系统,讨论了校准原理、系统组成、校准不确定度,通过分析和实验证明系统作为8mm小功率座的校准是可行的.     

基于CPS协同的微系统电源信号完整性设计

裸芯片die、硅通孔TSV(Through Silicon Via)硅转接板、高温共烧陶瓷HTCC(High Temperature Co-fired Ceramics)管壳等多材质多基板立体堆叠和高密度集成的微系统封装,因空间极度有限、跨尺度立体转换的失配、电磁效应的耦合,低电压大电流电源的电源分布网络PDN(Power Distribution Network)和GHz高速信号的通道设计成为难题。贴合微系统封装尺度越来越接近芯片尺度的特点,以及微系统模块的系统应用需求,研究了基于芯片、封装、系统CPS(Chip-Package-System)协同设计仿真的方法。针对核心电源PDN的设计,采用芯片功耗模型CPM(Chip Power Model),结合TSV硅基板、HTCC管壳、PCB三级去耦电容网络的布放和协同优化,有效降低了电源纹波,保证了电源完整性。针对高速信号通道设计,基于电磁场和电路结合的仿真,将芯片电特性配置与封装互连的拓扑匹配协同优化,封装与板级应用协同优化,保证了信号完整性,且不对封装版图和工艺提出严苛要求。     

从“权力距离”视角解读大学英语口语教学之现状

大学英语口语教学中的一个难题是学生在口语练习过程中的不参与、不配合。文化维度理论的“权力距离”可从文化差异的角度去解读造成师生关系尴尬的原因，从而为改进大学英语口语教学效果提出一些有效的教学建议。     

空间太阳能发电站拓扑架构及能量管理控制策略

针对超大功率空间太阳能电站(SSPS),提出了一种分布式+集中式系统拓扑架构,将系统电力传输分为太阳电池阵区、主结构电力传输区及发射天线阵区三大部分。根据系统三大阵区的能量流动关系,本文将SSPS系统的工作模式划分为最大功率点跟踪(MPPT)工作模式、跟踪功率指令工作模式及阴影区工作模式,并提出分层能源管理控制策略。最后,针对兆瓦级太阳电池阵的不同工作模式,利用Matlab/Simulink搭建空间太阳能电站系统仿真模型,进行仿真试验及对比分析,试验结果验证了拓扑架构的合理性及控制策略的有效性,为解决空间太阳能发电技术电力传输与能量管理问题提出了新思路。     

电源转换模块LTC3780的工作性能仿真分析

为了获得可应用于航天器系统的稳定的供电电源,采用高性能升压-降压开关稳压控制器LTC3780,设计在低压、高压和正常供电时都能实现预期输出电压的电源转换电路;利用LTspice软件对该电源转换电路进行工作性能仿真,主要对不同输入电压时的输出电压和不同负载时的带载能力进行了仿真,通过仿真实现了稳定的电压输出和较强的带载能力。     

微波功率均衡器的小型化设计

文章设计出一种小型化的微波功率均衡器。分析了均衡网络中谐振吸收枝节的特性,并讨论了谐振单元间匹配网络的设计原则与约束。对谐振单元和级间匹配网络的参数进行设定和调整,并利用仿真软件进行优化分析,可以设计出满足目标响应的均衡器。基于该方法,设计了频段为1GHz-2GHz、小型化的微波功率均衡器。