空空导弹靶试应用技术

空空导弹靶试精度评估是一项十分复杂的技术,它涉及到目标、载机的位置,以及飞行员操纵飞机向目标发射导弹的技能,为了对已经设计好的飞行员操作程序进行评估,必须确立适合于空战环境的评估准则.研究靶试技术的关键在于如何构建试验环境和确定合理的导弹性能鉴定方法.在讨论导弹的可靠性指标的基础上,对飞行员功能模型的程序软件进行了分析...     

塔康系统精度分析及试验验证

塔康系统是一种大型、精密的军用无线电导航设备。塔康的精度性能会影响飞机导航的性能。介绍了塔康导航系统的硬件组成,阐述了其定位(测距与测角)原理,对影响其定位精度的因素和可能受到的干扰进行了研究,并分析其方位精度性能指标要求及工程中的试飞验证方法。     

FY-3D卫星的北斗掩星分布特征与误差特性

利用2018年1－3月FY-3D卫星的掩星折射率数据,研究了北斗导航卫星系统的掩星分布特点、数据精度以及误差统计特征。北斗导航卫星系统同步静止轨道掩星沿卫星轨道呈弧状分布在南北两极地区,倾斜轨道掩星在东西半球低纬度地区分别形成一小一大两个空洞,中地球轨道掩星则全球均匀分布。北斗掩星折射率数据精度在探测核心区域,即12~32 km范围内,与ERA5再分析资料计算的折射率相比,平均偏差的标准差约为1.5%,在核心区外,标准差从1.5%逐渐增大到6%。静止轨道掩星的平均偏差在高层略大于倾斜轨道和中地球轨道掩星。下降掩星在20 km以上区域的标准差大于上升掩星,20 km以下区域小于上升掩星。高纬地区北斗掩星标准差最小,低纬地区最大,对流层中下层尤其明显。分析结果表明,北斗掩星的数据精度和误差特征与GPS掩星数据相似。     

基于5G的通导融合位置认证系统性能分析

随着无人化智能移动装备在工业、交通等安全敏感领域的普及应用，民用导航定位系统中的定位安全问题日益突出。位置认证是对终端的物理位置声明进行认证的过程，是导航定位安全技术的重要组成部分。基于第五代(5G)移动通信网络的通导融合位置认证系统具有覆盖范围广、认证精度高、用户容量大、建设运维成本低等多重优势。本文首先介绍了多基站位置认证系统的检测判决原理，提出了漏检平均距离的定义作为位置认证系统精度的量化评价指标。在此基础上，通过数值仿真分析了信号带宽、基站同步误差、信噪比对位置认证系统精度的影响，并利用5G信道模型评估了典型场景下的位置认证系统的性能。结果表明，在具备3个以上的视距基站时，基于5G的通导融合位置认证系统可以实现米级的位置认证精度。     

BeiDou-3 orbit and clock quality of the IGS Multi-GNSS Pilot Project

Within the Multi-GNSS Pilot Project (MGEX) of the International GNSS Service (IGS), precise orbit and clock products for the BeiDou-3 global navigation satellite system (BDS-3) are routinely generated by a total of five analysis centers. The processing standards and specific properties of the individual products are reviewed and the BDS-3 orbit and clock product performance is assessed through direct inter-comparison, satellite laser ranging (SLR) residuals, clock stability analysis, and precise point positioning solutions. The orbit consistency evaluated by the signal-in-space range error is on the level of 4–8 cm for the medium Earth orbit satellites whereas SLR residuals have RMS values between 3 and 9 cm. The clock analysis reveals sytematic effects related to the elevation of the Sun above the orbital plane for all ACs pointing to deficiencies in solar radiation pressure modeling. Nevertheless, precise point positioning with the BDS-3 MGEX orbit and clock products results in 3D RMS values between 7 and 8 mm.     

Refined modeling and experimental verification of a torque motor for an electro-hydraulic servo valve

The Permanent Magnet Torque Motor (PMTM) is the key electro-mechanical conversion device in an Electro-Hydraulic Servo Valve (EHSV). In this work, a refined model of a PMTM is developed, considering the non-working air-gaps between the upper or lower yoke and the armature, the fringing effect at the limiting holes, and the nonlinear permeability of soft magnetic material. Based on the refined model, the influences of various factors on the calculation accuracy of the magnetic flux at the pole surfaces of the armature and the output torque are investigated. For verifying the validity of the refined model, a Finite Element Analysis (FEA) of the PMTM is conducted, and a test platform is constructed. Compared with existing models, the refined model can better reveal the intrinsic mechanism of the PMTM, and its calculations are more consistent with the FEA results. The experimental results of the armature deflection displacement show that the refined model can accurately describe the output characteristics of the PMTM.     

芯片级光钟技术综述

芯片级光钟是一种基于热原子中光频跃迁的新型光钟,近年来随着光子集成技术、激光技术和微机电技术的发展,该类光钟可以实现较小的体积和较高的精度,有望广泛应用于对体积、质量、功耗和精度敏感的各种国防装备中.介绍了国内外芯片级光钟技术的进展情况,阐述了芯片级光钟的相关技术,包括基于双光子跃迁的光频标技术、微制造气室技术和微腔光频梳技术等,分析了影响频率稳定度和准确度的主要因素,最后对芯片级光钟面临的机遇和挑战进行了简要的展望.     

挠性空间机械臂伪速率增量反馈控制

针对空间机械臂平台中挠性机械臂与平台的耦合情况,采用伪速率反馈控制方法对机械臂平台的姿态控制系统进行设计和分析,使机械臂平台的姿态控制系统满足稳定性、控制精度等性能,并采用描述函数法对所设计线性控制系统的方法中,描述函数法是较为有效的方.η率脉冲调制喷气控制方案。本文在原有的伪速率脉.η的姿态控制系统进行稳定性分析。     

Comprehensive performance review of BDS-3 after one-year official operation

On July 31, 2020, the third generation BeiDou Global Satellite Navigation System (BDS-3) was officially put into service. Here we first reviewed the development history of BDS-3, and described the status of BDS-3 constellation, satellite signals, and ground tracking network. Then we expounded the 10 innovations in which BDS-3 differs from the other global satellite navigation systems. In addition, the latest service performance status of BDS-3 was displayed from a comprehensive perspective. The performance of BDS-3 was analyzed and evaluated from five aspects: constellation performance, observation data quality, spatial signal performance, PNT (Positioning, Navigation, and Timing) service performance, and precision positioning application. We used 14 indices to conduct comprehensive assessment of the BDS-3 service performance. Finally, the main direction of the next development of BDS was prospected.     

卫星在轨推进剂补加量测量方法精度研究

卫星在轨推进剂补加量的精确测量技术是在轨补加任务的关键技术之一。本文结合型号攻关结果，提出2种在轨推进剂补加量测量方法数学模型，分别是压力-体积-温度(PVT)法和超声波流量计法。首先，PVT法是一种通过补加前后受体卫星贮箱剩余量反算补加量的间接测量方法，而超声波流量计法是利用超声波顺逆流相位差进行测量的直接测量方法;其次，在推进剂补加量测量模型的基础上，进一步通过取变分的手段提出2种模型的精度分析解析模型，解析的精度分析模型不仅可用于定性分析影响测量精度的因素，还可量化评价各个因素对测量精度的影响;最后，利用现有在研单机的精度水平及精度分析解析模型分析了2种方法的测量精度，验证了方法的有效性。