一种新型高可靠性箭上配电控制器设计

针对传统箭上配电器在新应用时期下产生的问题，设计了一种基于MOSFET的供配电开关和基于采样电阻进行电流采集的新型高可靠性箭上遥测配电控制器，解决了传统继电控制器触点大电流冲击粘连问题，实现了新形势下的全国产化、小型化设计要求，进一步提高了系统可靠性，具有广泛的应用推广性。     

亚声速矩形射流的噪声辐射特性和声源分布

基于射流噪声模拟试验台，对出口面积相同的圆形喷口及宽高比分别为1、1.5、2、10的矩形喷口亚声速射流的远场噪声辐射特性和噪声源分布位置进行了较为系统的研究。通过远场噪声测量，获得了不同宽高比矩形喷口在不同方位角平面的射流噪声频谱分布结果相对于圆形射流的差异，揭示了矩形射流潜在的降噪潜力。通过基于波束成形算法的传声器阵列，得到了矩形射流噪声源峰值位置随频率的变化情况，系统分析了射流速度、方位角、宽高比等参数对矩形射流噪声源分布的影响。射流速度和方位角对矩形射流噪声源分布的归一化结果影响很小，而宽高比对矩形射流噪声源分布有较大影响：随着矩形宽高比的增加，矩形射流低频段噪声源向上游偏移，高频段噪声源向下游偏移。     

基于变参数广义结构的距离扩展目标检测方法

针对特定杂波背景下的最优或次优检测器结构难以适应过渡杂波环境的问题，首先，给出基于变参数广义结构的距离扩展目标检测器，通过调整参数来适应杂波特性。其次，确定检测器最佳参数的经验公式，经验公式符合数值结果。最后，利用仿真试验分析检测器的检测性能。仿真结果表明，在介于高斯和复合高斯杂波之间的过渡环境中，提出的检测器比现有检测器具有更加优异的目标检测性能，对杂波非高斯程度时空渐变性具有较强的适应能力。     

固体推进剂燃烧波温度分布测定

采用相对光强度法测定了双基推进剂、复合推进剂及NEPE（氧化剂为HNIW或HMX）推进剂的燃烧火焰温度分布。结果表明,用相对光强度法测得推进剂的最高燃烧火焰温度比热电偶法更接近推进剂的理论燃烧温度,测试压强越高,最高燃烧火焰温度与理论燃烧火焰温度的误差越小。     

中心进气复杂旋转盘压力特性的实验研究

中心进气具有两个出口的旋转盘系统中静盘表面沿半径方向的静压分布由实验方法获得.针对转速、冷却气体流量以及叶片冷却孔的存在与否对腔内流动特性的影响进行了分析.结果表明:在本实验范围内,静盘表面静压沿半径方向先减小,后增大.静盘表面静压随着总流量的增加而增加,随转速增加而降低.当减少盘面出流孔的数量时,静盘表面静压将会增加.当冷却气体流量较大时,盘腔内不能形成明显的旋转核心.     

平底直升机着水载荷和压力分布估算方法研究

将平底直升机底部形状简化为一矩形平板，基于经典的水动力冲击理论，建立简化的刚体运动方程，对其求解得到着水载荷及压力分布的估算方法。计算结果与国外相关资料比较，其准确性可以满足实际工程的要求。     

Modeling spatial density in low earth orbits using wavelets and random search

The events that occurred after 2007 such as Chinese anti-satellite test, explosion of Briz-M upper stage, break up of cosmos-2421 and collision of cosmos-2251 with Iridium-33 satellites have completely changed the spatial density patterns in low earth orbits. This has increased the risk of collision between active satellites and debris created by them. Aftermath, the risk assessment of possible collisions called as conjunction analysis of working satellites from day to day has become more crucial. Spatial density models are useful in understanding the long-term likelihood of a collision in a particular region of space and helpful in pre-launch orbit planning. In this paper we present an algorithmic procedure for automatically estimating exact model parameters corresponding to the peak location and number of peaks using wavelets that will speed up the parameter estimation process for the models with peaks.     

无线传感器网络覆盖新算法研究

目前无线传感器网络对时间空间连续分布的物理量进行监测时存在着节点分布不合理，覆盖效率低，网络计算量大等问题。采用流体力学中数值分析的动态嵌套网格技术，设计了一种新的基于动态嵌套网格技术的无线传感器网络覆盖算法。最后对该算法进行仿真实验，结果表明该算法在相同监测精度时所得到的覆盖效率、覆盖均匀性、能效指标等比传统的覆盖算法有所优化。     

Numerical and experimental study of twin-fluid two-phase internal-mixing atomizer to develop maximum entropy method

This paper presents an analytical, numerical, and experimental study on atomization characteristics and droplet distribution of a twin-fluid two-phase internal mixing atomizer to develop a Maximum Entropy Method (MEM). A two-phase Eulerian-Lagrangian method is utilized for atomization modeling of the inside and outside atomizer. In order to modify energy and momentum sources in the MEM, parametric studies are performed, and experimental tests are carried out to verify the results by applying the shadowgraph method. An advanced test stand is developed to prepare a wide range of changes in atomization characteristics and mixing ratios. A high degree of consistency is found between numerical results from the developed MEM and experimental tests with different gas-phase pressures and liquid flow rates. The droplet diameter and velocity distribution are reviewed based on various Weber numbers, sources of energy, and momentum. Turbulence modeling assists to estimate the breakup length and time scale precisely in the developed MEM, and distribution ranges with mean values are achieved. With reference to a strong correlation between upstream turbulence flow and the developed MEM verified by experimental tests, an ideal droplet size and velocity distribution prediction is observed.