带人工雨线的斜拉桥拉索模型测压试验研究

斜拉桥拉索风雨激振是当今国际风工程和桥梁工程研究人员非常关注的问题.为了掌握风雨激振时拉索的气动力特性,研究人员对风向角为0°时带人工雨线的拉索模型进行了测力试验.但至今人们尚未测量过风向角不为0°时带人工雨线的拉索模型上的气动力.本文设计、制作了可方便调节拉索模型倾角和风向角的试验装置以及用于测压试验的带人工雨线的拉索模型,并在风洞中进行了细致的试验.试验得到了具有典型倾角的拉索在不同风向角下,拉索模型上的平均风压和脉动风压系数,以及气动力系数.这些结果为建立精细的理论模型提供了基础.     

战术导弹大迎角高M数绕流特性分析

某战术导弹高马赫数大迎角蒸汽屏流动显示和测力试验先后在中国空气动力研究与发展中心0.6m跨超声速风洞中进行,本文给出了M数为0.8、2.0、4.0,模型迎角为20°、30°、40°时的部分结果.结果表明:模型在大迎角下出现十分复杂的涡系图像;随着M数或迎角的增加,涡的尺寸及其离弹身的高度都增大;当模型状态对称时,流动图像基本上是对称的,而当模型状态不对称时,流动图像也不对称.测力结果与流动显示图像结果具有较好的一致性.     

镍基超合金再铸层化学研磨去除的实验研究

研究了镍基超合金激光／电火花打孔再铸层的物理化学特性，并报道了DZ125、ЖKC6y、K24、DD3、DD6以及IC10等合金的化学研磨处理对基材腐蚀及其力学性能与热疲劳性能的影响等。实验研究表明：镍基超合金的激光／电火花再铸层有着不同于其本身原始铸态的化学性能，采用适当的化学研磨介质和优化的化学研磨条件可以快速有效地去除再铸层，使孔圆整光滑而不损伤合金基体、不降低基体的力学性能，并且可提高孔的热疲劳性能，由此可望实现镍基超合金涡轮叶片“三无”气膜孔的激光／电火花打孔 化学研磨复合法高效高质量制造。     

影响Al2O3凝相尺寸分布的因素

用激光全息装置测量含铝复合推进剂燃烧场凝聚相的分布，分辨率为5μm。分析了滞留时间、铝粉含量（2％－16％）和燃烧室压强（0.1MPa-4MPa）对凝相粒子尺寸分布的影响，实验表明，粒子总数随滞留时间减少，粒子越大，减少的相对比例越大；粒子尺寸分布不随燃烧室压强和推进剂铝粉含量变化。     

利用多普勒原理测量微机电系统中微结构的动态特性

介绍了将显微扫描激光多普勒测振仪与基础激振法相结合的微结构动态特性的非接触无损测量方法、扫描激光多普勒测振仪的工作原理、设计的基础激振器及其驱动信号.并给出典型微结构--微悬臂梁的测量结果.测量结果与理论计算及有限元仿真结果相符,验证了该方法的有效性.     

A Comparative Study of the Influence of the Active Young Sun on the Early Atmospheres of Earth, Venus, and Mars

Because the solar radiation and particle environment plays a major role in all atmospheric processes such as ionization, dissociation, heating of the upper atmospheres, and thermal and non-thermal atmospheric loss processes, the long-time evolution of planetary atmospheres and their water inventories can only be understood within the context of the evolving Sun. We compare the effect of solar induced X-ray and EUV (XUV) heating on the upper atmospheres of Earth, Venus and Mars since the time when the Sun arrived at the Zero-Age-Main-Sequence (ZAMS) about 4.6 Gyr ago. We apply a diffusive-gravitational equilibrium and thermal balance model for studying heating of the early thermospheres by photodissociation and ionization processes, due to exothermic chemical reactions and cooling by IR-radiating molecules like CO₂, NO, OH, etc. Our model simulations result in extended thermospheres for early Earth, Venus and Mars. The exospheric temperatures obtained for all the three planets during this time period lead to diffusion-limited hydrodynamic escape of atomic hydrogen and high Jeans’ escape rates for heavier species like H₂, He, C, N, O, etc. The duration of this blow-off phase for atomic hydrogen depends essentially on the mixing ratios of CO₂, N₂ and H₂O in the atmospheres and could last from ∼100 to several hundred million years. Furthermore, we study the efficiency of various non-thermal atmospheric loss processes on Venus and Mars and investigate the possible protecting effect of the early martian magnetosphere against solar wind induced ion pick up erosion. We find that the early martian magnetic field could decrease the ion-related non-thermal escape rates by a great amount. It is possible that non-magnetized early Mars could have lost its whole atmosphere due to the combined effect of its extended upper atmosphere and a dense solar wind plasma flow of the young Sun during about 200 Myr after the Sun arrived at the ZAMS. Depending on the solar wind parameters, our model simulations for early Venus show that ion pick up by strong solar wind from a non-magnetized planet could erode up to an equivalent amount of ∼250 bar of O⁺ ions during the first several hundred million years. This accumulated loss corresponds to an equivalent mass of ∼1 terrestrial ocean (TO (1 TO ∼1.39×10²⁴ g or expressed as partial pressure, about 265 bar, which corresponds to ∼2900 m average depth)). Finally, we discuss and compare our findings with the results of preceding studies.     

The Genesis Solar Wind Concentrator Target: Mass Fractionation Characterised by Neon Isotopes

The concentrator on Genesis provided samples of increased fluences of solar wind ions for precise determination of the oxygen isotopic composition. The concentration process caused mass fractionation as a function of the radial target position. This fractionation was measured using Ne released by UV laser ablation and compared with modelled Ne data, obtained from ion-trajectory simulations. Measured data show that the concentrator performed as expected and indicate a radially symmetric concentration process. Measured concentration factors are up to ∼30 at the target centre. The total range of isotopic fractionation along the target radius is 3.8%/amu, with monotonically decreasing ²⁰Ne/²²Ne towards the centre, which differs from model predictions. We discuss potential reasons and propose future attempts to overcome these disagreements.     

弹道导弹突防某型ABL的自旋速度研究

叙述了某型机载激光武器(ABL)的作战方案、杀伤威力及其对弹道导弹的威胁。针对弹道导弹主动段自旋的突防方案,分析了弹道导弹自旋速度的上限、下限和具备突防某型ABL能力的最小自旋速度。以某型远程弹道导弹为例,通过仿真计算确定了其突防某型ABL最合适的自旋速度范围。研究结果表明,所确定的自旋速度范围既能在某型弹道导弹上实现,又能达到突防某型ABL的效果,表明弹道导弹主动段自旋是防御激光武器的一种有效措施。     

T-1A型高精度绝对重力仪

高精度绝对重力仪用于测量地球表面的重力加速度（g,常用值9.81 m/s2）,在精密计量、大地测量、地球物理、资源勘探等领域具有广泛应用。近年来,清华大学自主研制完成T-1与T-1A型高精度绝对重力仪,采用新型的自由落体装置、激光干涉测量技术和信号处理方法,可实现微伽量级不确定度的精密重力测量。本文主要介绍T-1A型高精度绝对重力仪的系统技术和测试结果,经过进一步工程化改进,该仪器有望实际应用于重力计量、地震研究等领域。     

角振动校准装置研究

为提升对惯性器件的动态性能评价能力,通过对被校传感器施加标准正弦角振动激励,精确测量角振动过程,实现了对角振动传感器的校准。基于不同频段的特点,将校准频段划分为低频和高频2部分,并提出空气轴承与无刷直流力矩电机相结合的低频角振动台方案,以及轻质空心杯精密空气轴承与框式电磁驱动结构相结合的高频角振动台方案;分别采用精密角度编码器和衍射光栅激光干涉仪实现对低频和高频角振动的测量,成功研制出频率范围为0.25~550Hz、角加速度范围为0.1~1 760rad/s2以及角速度波形失真小于2%的角振动绝对法校准装置。与德国国家物理技术研究院的角振动校准装置相比,该装置能够显著提升承载能力,可广泛用于惯性器件动态性能的测试与评价。