螺旋结构日珥与Kippenhahn-Schlüter模型

利用具有螺旋结构的宁静日珥观测资料,基于:(1)日珥内部的磁场位形具有无力性质;(2)日珥整体电流性质可用Kippenhahn-Schlüter模型描述;从理论上探讨了这些日珥的电流特性。并将所得结果与Kuperus-Raadu日珥模型进行了比较,结果表明:(i)日珥内部的磁场和电流确实具有无力性质;(ii)不考虑虚镜电流的Kippenhahn-Schlüter模型可能是描述宁静日珥电流特性的较好模型;(iii)可能存在两类导致日珥爆发的物理原因。     

卫星表面材料物性与电荷积累

卫星表面在地磁亚暴环境下积累电荷的现象是必然的。由于表面间物性的差别,这种积累将是不均衡的,然而一旦建立了电势差,那末表面与表面,表面与构架间就会存在电荷交换,使电势差逐渐趋于减小。文章试图通过物理模型的建立,由此推导出面间电势差变化与表面电势值及表面的电导、电容的关系,从而建立一种明确的数学模型,以利卫星表面充电状态的分析。     

毛细泵环路系统运行特性的数值研究

给出了描述毛细泵环路(CPL)系统运行特性的非稳态模型,并运用该模型模拟了系统的启动过程,考察了储液罐中温度波动以及蒸发器上热负荷的突然改变对系统稳定性的影响;从数值模拟的角度更好地预测和分析CPL系统运行的过程和特点,该模型的数值结果与实验现象和实验数据相比有较好的一致性。通过该模型还可以进一步揭示CPL系统运行过程中启动困难、储液罐温度不能波动过大以及热流密度突然改变引起系统失效等内在原因,为设计出性能优良的CPL系统提供了理论依据。     

改进FDTD／集总源模型分析航天器场线耦合

针对典型的电磁脉冲对航天器电缆耦合问题,建立了航天器场线耦合分析模型。在场分布计算方面,采用基于平均电参数和分析目标与 Yee网格不重合的边缘部分修正的改进时域有限差分法。在场线耦合方面,建立基于集总等效源模型的多导体传输线瞬态响应模型,将外场在传输线上激励的分布电压源和电流源与传输线指数矩阵解耦,建立了集总等效电压源和电流源模型。采用分析模型分析运载内一根电缆受电磁脉冲影响的响应,结果表明,即使存在屏蔽作用,电磁脉冲在电缆上耦合的干扰足以损毁设备。     

面天线检测数据处理方法的探讨

对面天线检测数据处理方法作了一些有益的探讨。从获取被测物的三维坐标后到获取真正有用的信息这一过程需要经过坐标转换和表面误差计算两个步骤 ,其中坐标转换是关键。在坐标转换方面 ,文中提出了曲面自由拟合、公共点转换和CAD面型转换三种方法 ,阐述了这些方法的数学模型 ,并且用实测数据进行了验证计算。理论分析和实际计算两方面显示 :CAD面型转换法既不需要天线的曲面方程 ,也不需要有已知的公共点 ,结果准确、可靠 ,是一种理想的方法 ;如果没有天线的CAD面型 ,但却存在公共点时 ,公共点转换法也是较理想的方法 ,其结果与给定的公共点误差有关 ;如果既没有天线的CAD面型又无公共点或公共点误差很大时 ,只能采用曲面自由拟合法 ,该法准确度最高 ,但容易使天线面型产生错位现象     

电子设备热分析软件应用研究

应用热分析技术,能在产品的设计阶段获得其温度分布,从而优化设计,提高产品可靠性.介绍了现在流行的电子设备热分析软件,阐述了电子设备热分析软件在应用中面临的一些问题,并结合一简单实例,展示了电子设备热分析的全过程,对热分析软件应用中的部分难题提出了解决方案.结果表明:妥善处理好主要问题,则能够达到较高的热分析精度,满足工程需求.      

Method for the prediction of the effective dose equivalent to the crew of the International Space Station

This paper describes a methodology for assessing the pre-mission exposure of space crew aboard the International Space Station (ISS) in terms of an effective dose equivalent. In this approach, the PHITS Monte Carlo code was used to assess the particle transport of galactic cosmic radiation (GCR) and trapped radiation for solar maximum and minimum conditions through an aluminum shield thickness. From these predicted spectra, and using fluence-to-dose conversion factors, a scaling ratio of the effective dose equivalent rate to the ICRU ambient dose equivalent rate at a 10 mm depth was determined. Only contributions from secondary neutrons, protons, and alpha particles were considered in this analysis.     

Influence of lunar topography on simulated surface temperature

The surface temperature of the Moon is one of the essential parameters for the lunar exploration, especially to evaluate the Moon thermophysical features. The distribution of the temperature is heavily influenced by the Moon topography, which, however, is rarely studied in the state-of-art surface temperature models. Therefore, this paper takes the Moon topography into account to improve the surface temperature model, Racca model. The main parameters, such as slopes along the longitude and latitude directions, are estimated with the topography data from Chang’E-1 satellite and the Horn algorithm. Then the effective solar illumination model is then constructed with the slopes and the relative position to the subsolar point. Finally, the temperature distribution over the Moon surface is obtained with the effective illumination model and the improved Racca model. The results indicate that the distribution of the temperature is very sensitive to the fluctuation of the Moon surface. The change of the surface temperature is up to 150 K in some places compared to the result without considering the topography. In addition, the variation of the surface temperature increases with the distance from the subsolar point and the elevation, along both latitude and longitude directions. Furthermore, the simulated surface temperature coincides well with the brightness temperature in 37 GHz observed by the microwave sounder onboard Chang’E-2 satellite. The corresponded emissivity map not only eliminates the influence of the topography, but also hints the inherent properties of the lunar regolith just below the surface. Last but not the least, the distribution of the permanently shadowed regions (PSRs) in the lunar pole area is also evaluated with the simulated surface temperature result.     

仪器设备间距对空间实验室机柜内部流动和传热的影响分析

为充分利用机柜内有限空间并改善仪器设备的散热环境,建立了空间实验室机柜的模型,运用数值计算方法,对不同仪器设备间距下机柜内流场和温度场进行求解,研究了不同布局仪器层平均风速和仪器表面平均对流换热系数的变化规律。结果表明,合理地选择仪器设备间距可以有效地改善其表面的散热状况,为空间实验室机柜的热设计提供了依据。     

Control-oriented Modeling for Air-breathing Hypersonic Vehicle Using Parameterized Configuration Approach

This article presents a parameterized configuration modeling approach to develop a 6 degrees of freedom (DOF) rigid-body model for air-breathing hypersonic vehicle (AHV). The modeling process involves the parameterized configuration design, inviscous hypersonic aerodynamic force calculation and scramjet engine modeling. The parameters are designed for airframe-propulsion integration configuration, the aerodynamic force calculation is based on engineering experimental methods, and the engine model is acquired from gas dynamics and quasi-one dimensional combustor calculations. Multivariate fitting is used to obtain analytical equations for aerodynamic force and thrust. Furthermore, the fitting accuracy is evaluated by relative error (RE). Trim results show that the model can be applied to the investigation of control method for AHV during the cruise phase. The modeling process integrates several disciplines such as configuration design, aerodynamic calculation, scramjet modeling and control method. Therefore the modeling method makes it possible to conduct AHV aerodynamics/propulsion/control integration design.