一种摩擦阻尼器在整体叶盘结构的应用

介绍了一种应用于整体叶盘结构的摩擦阻尼器,即在轮缘下方加工销孔,安装阻尼销.工作时,由于离心载荷的作用,阻尼销与轮缘相互摩擦,从而消耗振动能量.这种阻尼器被应用于两台发动机的涡轮整体叶盘减振方案中,试验结果显示:其减振效率差异较大.数值模拟分析证明,这种阻尼器的减振效率和振动能量在叶-盘间的传递有关.对于叶-盘强耦合振型,这种阻尼器可以获取较高的减振效率,叶片振动应力水平下降了约70%;但对于叶-盘弱耦合振型,叶片振动应力幅值没有明显下降趋势.      

Sound insulation performance of plates with interconnected distributed piezoelectric patches

This paper deals with the sound insulation performance of a thin plate with intercon-nected distributed piezoelectric patches. Piezoelectric patches are periodically bonded on the sur-faces of the plate in a collocated fashion, and are interconnected via an inductive circuit network. This piezoelectric system is termed as piezo-electromechanical (PEM) plate in the paper. Homogenization methods are involved under a sub-wavelength assumption to analytically develop the dynamical equations for the PEM plate. The dispersion relationships and energy densities of the wave modes propagating in the PEM plate are studied;the sub-wavelength assumption is verified for the simulations in this paper. The coincidence frequency of the PEM plate is researched, and results show that the coincidence frequency of the PEM plate will disappear at certain circum-stances;mathematical and physical explanations are made for this phenomenon. The disappearance of the coincidence frequency is used to optimize the value of inductance, for the purpose of improv-ing the sound transmission loss of the PEM plate.     

航空航天智能材料与智能结构研究进展

智能材料作为新兴多功能材料,能够实现结构功能化、功能多样化。智能结构是在结构中集成智能材料作为传感器和驱动器,使结构除了具有承载、传力、连接等功能外,还具有自感知、自诊断、自驱动、自修复等能力,以更好地适应外界环境的变化,可显著提升航空航天架构的性能。目前智能材料与智能结构已成为航空航天架构减重增效研究的重点。根据国内外智能材料和结构的研究进展,综述了压电材料、铁磁材料、形状记忆材料、智能复合材料等智能材料的发展;讨论了智能结构的研究及应用前景,包括自诊断智能结构、自修复智能结构和减振降噪智能结构;最后,指出了智能材料与结构当前面临的一些挑战性问题,展望了其在航空航天领域的应用前景。     

Flutter analysis of an airfoil with nonlinear damping using equivalent linearization

The equivalent linearization method （ELM） is modified to investigate the nonlinear flut- ter system of an airfoil with a cubic damping. After obtaining the linearization quantity of the cubic nonlinearity by the ELM, an equivalent system can be deduced and then investigated by linear flut- ter analysis methods. Different from the routine procedures of the ELM, the frequency rather than the amplitude of limit cycle oscillation （LCO） is chosen as an active increment to produce bifurca- tion charts. Numerical examples show that this modification makes the ELM much more efficient. Meanwhile, the LCOs obtained by the ELM are in good agreement with numerical solutions. The nonlinear damping can delay the occurrence of secondary bifurcation. On the other hand, it has marginal influence on bifurcation characteristics or LCOs.     

基于起落架参数设计的某直升机地面共振及参数影响分析

建立了某直升机地面共振分析力学模型,计算了起落架在桨毂中心处的等效刚度和阻尼,针对某直升机进行了地面共振分析,同时分析了摆振铰外伸量、质量静距、桨毂中心有效刚度等对地面共振的影响,为避免地面共振及参数改进提供依据。     

Stability analysis of an aeroelastic system with friction

In this paper, harmonic balance method, exact formulation and numerical simulation method are adopted to study the effects of different friction stiffness on the stability of 1.5 degrees of freedom aeroelastic system. On this basis, the expressions of input energy and dissipated energy are deduced, and the energy method is used to reveal the mechanisms of the stable boundary and unstable boundary existing in the system and the effects of different friction stiffness on the stability of the system. Studies have shown that the stability region and the critical aerodynamic damping ratio of the system rise with the increase of the friction stiffness, while the friction stiffness has little effect on the stability boundary. In the analysis of the stability of system, the results of harmonic balance method, exact formulation and Newmark of numerical simulation method are in good agreement. Compared with exact formulation and numerical simulation method, the concept and conclusion of harmonic balance method are simple in the system stability analysis.     

航空带垫卡箍刚度及阻尼特性分析与试验验证

研制了带垫卡箍刚度测试装置,分别对不同规格卡箍线刚度和扭转刚度进行了测量,并将卡箍刚度测量数值引入卡箍-管路系统有限元模型,通过管路固有特性数值计算与试验测试结果对比,误差在5％左右,验证了卡箍刚度参数的准确性.进一步搭建了卡箍阻尼测量系统,通过测量卡箍动态传递率,获得相对应的模态阻尼比,并将卡箍阻尼测量数值引入卡箍-...     

基于实验复模态参数的有限元模型修正

提出了一种利用非完备实验复模态参数,修正带有非比例阻尼矩阵结构有限元模型的迭代修正方法。首先,对处理困难的阻尼矩阵表达为质量与刚度矩阵的多项式组合,并给出了物理解释,被修正参数为该多项式的系数和结构的某些局部几何、材料参数,其修正结构物理意义明确,与结构的动态设计相适应,实例表明了本文修正方法的有效性。     

电子阻尼的增进——局部激励应变的补偿

分析了以压电陶瓷片为作动和测量元件,构成速度负反馈的闭环控制的“电子阻尼技术”之所以不能大幅度增加结构阻尼的原因。提出了“局部激励应变补偿”和把通常的微分负反馈改为低截止频率的惯性环节正反馈的控制新方案。压电悬臂梁的实验表明,它们能使结构模态阻尼比大幅提高。     

小阻尼动态系统的时域自适应反馈主动阻尼设计

针对在前馈／反馈混合控制中提高控制通道阻尼的问题,基于自适应滤波理论,提出适用于单输入单输出(SISO)和多输入多输出(MIMO)控制通道的时域自适应反馈主动阻尼设计方法。研究了自适应过程的理想期望信号的构造、SISO情况下闭环控制通道与反馈控制器同时进行自适应设计以及MIMO控制通道阻尼问题的简化与设计方法的拓展等问题;同时,基于某主动隔振试验平台的实测结果,对所有研究内容进行SIMULINK模型仿真。时域自适应反馈主动阻尼设计是高效的主动阻尼设计方法,并且为小阻尼动态系统的增阻设计提供了统一的方法框架。