基于单轴旋转调制的重力梯度全张量测量方法研究

建立正确合理的重力梯度测量模型对于实现重力梯度测量具有重要作用。本文从动力学基本原理和牛顿第二定律出发,推导了加速度计敏感轴分别沿转盘切线方向和转盘转轴方向安装时,加速度计的输出与重力梯度张量间的关系式,式中的各项均具有对应的物理含义,可通过直接测量或计算得到。本文还利用仿真模型对新的重力梯度全张量的测量方式的可行性进行了分析,结果表明,利用新的测量方式计算得到的“伪测量值”与理论计算值间的误差小于1E,证明该测量方式是可行的。最后,论文讨论了这种新测量方式在实际应用中可能出现的问题及解决方案。     

科学实验卫星高速上行链路设计

为保障在卫星与地面之间开展空间量子科学实验的条件,必须为科学实验载荷建立一条星—地高速数据双向传输链路.通过跟踪CCSDS-SLS-NGU（空间数据系统咨询委员会-空间链路业务-下一代上行链路）工作组对NGU的研究进展,结合科学实验卫星有效载荷建立高速上行链路的需求,采用高带宽利用率调制技术、高效信道编码方式及适用的链路数据传输协议,设计了一种传输速率为1Mbit/s、误码率优于1×10-9的高速上行链路方案,并给出星载设备实现方案和地面初步测试结果.该方案在技术体制上兼容已有CCSDS规范,便于地面站及星载接收机实现,完全满足开展空间量子科学实验的需要.     

GNSS接收机数字载波跟踪环建模与噪声性能分析

针对GNSS接收机高灵敏度跟踪问题,研究数字载波跟踪环热噪声相位颤动与相干积累时间长度的关系.在分析I·Q鉴相器的Costas载波环信号处理流程的基础上,建立了新的环路线性化模型.基于该模型,推导了由最佳模拟环路滤波器双线性变换离散化得到的数字载波跟踪环的噪声性能.数值分析表明:采用I·Q鉴相器的二阶、三阶数字载波环热噪声相位颤动,随相干积累时间的增大先减小后增大,存在热噪声相位颤动最小意义上的最佳相干积累时间.仿真结果验证了理论分析结论,同时表明新建模型对数字载波跟踪环的描述比传统模型更准确.文中给出的各载噪比和环路带宽组合条件下的最佳相干积累时间,可用于指导高灵敏度接收机载波跟踪环设计.     

CBOC调制信号及其新型相关函数研究

介绍了复用二进制偏置载波（MBOC）信号的功率谱特性特点,用仿真方法讨论了复合二进制偏置载波（CBOC）信号时域表示及其功率谱密度、自相关函数和伪码跟踪性能,证明了CBOC信号的优越性。针对CBOC信号自相关函数多峰性,给出了一种CBOC信号新型相关函数的产生方法。     

稳态等离子体推力器羽流仿真及其对微波的衰减和相移作用

为了评估稳态等离子体推力器（SPT）羽流对微波造成的衰减和相位变化,使用二维轴对称的PIC-DSMC方法,在空间及室压6mPa的真空舱两种环境下,计算了SPT-100羽流场中的电子分布。在此基础上,通过分析特征频率和计算衰减因子、相位常数,估算了2,4,8,12.5GHz共4个频率微波穿过羽流场时的衰减量和相移。8GHz和12.5GHz微波未发现明显的衰减,相移为10°～120°。2GHz和4GHz微波在喷口附近衰减量范围为10～50dB。仿真结果表明,C波段和S波段在SPT羽流中容易发生衰减,而X波段以上的高频微波衰减量很小,同时这几个波段微波均发生较大相移。真空舱内6mPa背压下对衰减量的预测仅略高于实际飞行情况,但微波相移会有较大误差。     

基于制导信息的一维波束可控随机脉位脉冲多普勒引信技术研究

针对空空导弹引信的任务特点,综合采用了基于制导信息的起爆控制算法技术、自适应调整天线波束倾角技术、基于频域信号处理的数字信号处理技术设计了总体技术方案.仿真分析和试验表明,系统实现了对作战飞机、导弹等不同类型目标的智能探测,提高了对目标的探测灵敏度和抗干扰能力.     

天线组阵中SUMPLE算法的合成相位漂移补偿

针对SUMPLE算法在低信噪比时存在的相位漂移问题,在分析权值估计误差引起的合成信号相位漂移现象的基础上,提出一种以固定时刻合成权值作为参考的补偿算法。该算法以收敛后某个固定时刻的合成权值作为参考,其他时刻的相位补偿值通过与该参考权值进行相关计算得到。从理论上分析了该算法的可行性,并进行仿真验证。理论分析与仿真结果表明,所给出的相位补偿方法能有效地消除合成信号的相位漂移现象,补偿后的合成信号相位中心稳定。     

The photometric study of light scattering from the surface of alumina powder and interpretations by Hapke formula

A laboratory experiment helps to understand the light scattering property of regolith like samples with known compositions and other physical parameters. The laboratory data so obtained can be compared with the existing in situ data on celestial objects like asteroids. Further, it may be analyzed with the help of various theoretical models to understand the light scattering processes from regolith more clearly. In this work we have performed laboratory based photometry of the light scattered from the surfaces of powdered alumina (Al₂O₃) at various tilt angles of the sample and at large phase angles, with the particles having diameter 0.3 μm. The wavelength of observation was 632.8 nm. These data have been fitted by a surface scattering model originally suggested by Hapke. Instead of using empirical Henyey–Greenstein phase function to fix the values of albedo and phase function to be used within Hapke formula, we have used Mie theory for the same. This approach helped us to determine the single particle properties such as particle diameter and complex refractive index from surface scattering phase curve alone. Mie theory depends only on the size parameter X(=2π(radius/wavelength)) and complex refractive index (n, k) of the material. Since the absorption coefficient (k) for alumina is known to be very low but not exactly zero, the best fit to the experimental data was obtained by least square technique with k as a free parameter, as the other parameters are known. Finally, we compare our results with other published results and discuss the scope of application of the method we adopted.     

CubeSail: A low cost CubeSat based solar sail demonstration mission

CubeSail is a nano-solar sail mission based on the 3U CubeSat standard, which is currently being designed and built at the Surrey Space Centre, University of Surrey. CubeSail will have a total mass of around 3 kg and will deploy a 5 × 5 m sail in low Earth orbit. The primary aim of the mission is to demonstrate the concept of solar sailing and end-of-life de-orbiting using the sail membrane as a drag-sail. The spacecraft will have a compact 3-axis stabilised attitude control system, which uses three magnetic torquers aligned with the spacecraft principle axis as well as a novel two-dimensional translation stage separating the spacecraft bus from the sail. CubeSail’s deployment mechanism consists of four novel booms and four-quadrant sail membranes. The proposed booms are made from tape-spring blades and will deploy the sail membrane from a 2U CubeSat standard structure. This paper presents a systems level overview of the CubeSat mission, focusing on the mission orbit and de-orbiting, in addition to the deployment, attitude control and the satellite bus.     

一种基于天线虚拟运动的跳空扩频调制方法

为了加强无线通信物理层的传输安全,提出了一种基于天线虚拟运动的跳空扩频调制信号,采用天线的切换发射仿真天线运动,并且天线的切换方式由扩频码控制。利用天线开关函数产生的谐波分量构成一个空间扩频信号,这样发射的扩频信号不仅与发射信号使用的扩频码有关,而且与接收机相对于发射机的空间方位信息有关,是一种多天线跳空方式产生的扩频信号。最后给出了跳空扩频信号的频谱扩展性能、自相关性能、互相关性能、安全性能和多用户的通信性能,仿真结果表明跳空扩频信号为信息提供了一种更加安全的无线传输方法。