WIOBSS: The Chinese low-power digital ionosonde for ionospheric backscattering detection

The ionospheric laboratory of Wuhan University has developed an ionosonde over about seven years. The prototype is designed as a portable, low-power digital MF (medium frequency) and HF (high frequency) radio system with high range and Doppler resolution. The first system is used for ionospheric oblique backscattering detection and called WIOBSS (Wuhan Ionospheric Oblique Backscattering Sounding System). WIOBSS is a portable monostatic ionosonde for both ionospheric research and HF channel management, adopting alternate transmitting and receiving patterns to transmit long coded pulse trains for high pulse compression gain. The almost perfect sequences are applied to modulate the pulse train for sounding without range sidelobes and the echo phase is used to estimate the Doppler velocity and velocity fluctuation. This paper introduces the new techniques adopted by WIOBSS and presents some observations.     

8802超低频标准相位产生器

８８０２超低频标准相位产生器采用数字技术，用Ｄ／Ａ变换方法产生正弦信号，由单片机控制频率和相位，频率由晶振综合产生，相位可数字预置，频率准确度高至±５×１０￣（－６），相位准确度高至±０．０００２°。介绍了主要技术指标、工作原理、技术特点和误差分析等。     

一种新型恒温—温补晶体振荡器

提出了一种ＯＣＸＯ的恒温控制方法。该方法是利用乙醇的沸点制成换态式恒温箱。这种温度控制方法既可以用作中准确度的ＯＣＸＯ，又可以作为精密双层控温ＯＣＸＯ的外层恒温装置，还可以与简单的温补线路结合，构成高准确度的ＯＴＣＸＯ。     

Morphology and Frictional Characteristics Under Electrical Currents of Al203/Cu Composites Prepared by Internal Oxidation

Two AhO3/Cu composites containing 0.24 wt.% A1203 and 0.60 wt.% A1203 separately are prepared by internal oxidation.Effectsof sliding speed and pressure on the fi-ictional characteristics of the composites and copper against brass are investigated and compared.The changes in morphology of the sliding surface and subsurface are examined with scanning electron microscope (SEM) and energy dispersive X-ray spectrum (EDS).The results show that the wear resistance of the AI203/Cu composites is superior to that of copperunder the same conditions.Under a given electrical current,the wear rate of AI203/Cu composites decreases as the AleO3-content increases.However,the wear rates of the Al203/Cu composites and copper increase as the sliding speed and pressure increase under drysliding condition.The main wear mechanisms for AleO3/Cu composites are of abrasion and adhesion;for copper,it is adhesion,although wear by oxidation and electrical erosion can also be observed as the speed and pressure rise.     

抗H2S毒化的载体催化元件

载体催化元件是最为常用的矿下瓦斯浓度检测器件，它灵敏度较高，线性度好，可精确地检测瓦斯浓度。为了克服其容易H2S中毒的缺点，采用并改进了现有的防中毒方法，明显地提高了元件的抗中毒能力。     

基于数字补偿的快速频率合成方法的研究

基于I/Q调制的快速频率合成方法比目前采用的频率合成方法更易调试,而且使用灵活。其思路是将信号先通过单边带调制,将较低频率调制到需要的频率范围;然后采用对基带信号的数字预补偿方法来抑制镜像频率和载波泄漏,从而达到应用的目的。文章中还给出一种基于输出信号包络信息的补偿系数调整算法,其仿真结果说明该新补偿算法可以有效抑制镜像频率和载波泄漏。     

Carrier phase prediction method for GNSS precise positioning in challenging environment

Since the signals of global navigation satellite system (GNSS) are blocked frequently in challenging environments, the discontinuous carrier phases seriously affect the application of GNSS precise positioning. To improve the carrier phase continuity, this paper proposes a carrier phase prediction method based on carrier open-loop tracking. In the open-loop tracking mode, the carrier numerically controlled oscillator (NCO) is controlled by the predicted Doppler, but not by the loop filter output. To improve the phase prediction effective time, accurate receiver clock drift estimation is studied in the prediction method. The phase prediction performance is tested on GNSS software receiver. In the phase prediction effective time tests, open-loop processes were set for the tested channel. The test results show that, when some satellite signals are blocked in 15?s, the probability of carrier phase error less than quarter cycles is more than 94%. In the real time kinematic (RTK) positioning tests, some satellite signals are blocked in 10–15?s repeatedly. The test results show that, the carrier phase continuity is basically not affected by the signal interruption, and the RTK can almost keep continuous centimeter-level positioning accuracy without re-fixing the integer ambiguity.     

激光动态液位测量技术研究

如今,运载火箭大量使用液氧、煤油等液体推进剂,其液位测量技术主要有浮子式、激光式、电容式、雷达式等。介绍并实现了一种激光液位测量系统,该系统体积小、功耗低,可适应多种测量环境,能满足航天燃料液位测量高精度、高动态、连续稳定测量的要求。系统利用相位式激光测距技术,通过测量激光回波信号的相位延迟,计算激光光程从而得到距离数据并通过客户端进行直观展示和数据存储。系统最大测量距离可达100 m,精度为±1 mm。该系统为非接触测量,耐腐蚀,通过加入反射板可实现透明、非透明液体测量。     

超临界RP-3航空煤油喷嘴内部流动与相变特性研究

未来航空燃气轮机采用燃油作为冷却剂,对发动机冷却空气及热端部件进行冷却,使得燃油在进入燃烧室之前超过其热力学临界点,燃油的热力学性质发生巨大变化,将对燃油在喷嘴内的流动和喷嘴下游的喷射掺混过程产生重要的影响,因此有必要对超临界RP-3在喷嘴内的流动与相变特性展开研究。本文采用自主设计的喷嘴内部收缩通道模拟试验件,对超临界RP-3在喷嘴内的沿程压力分布进行测量,并采用基于一维等熵假设的计算方法进行数值模拟。试验首次获得了超临界航空煤油RP-3在喷嘴收缩通道内的沿程静压分布随喷射压力、温度变化的规律。通过与模型对比,发现未发生相变时,计算结果与试验值拟合精度较高,可以较好地预测RP-3在喷嘴内的流动参数,喷嘴内的静压分布也趋于一致;发生冷凝相变时,计算结果与试验值产生误差较大,喷射参数对于静压分布存在着较大的影响。本文试验获得的超临界RP-3航空煤油在喷嘴内的流动与相变特性,为航空发动机超临界RP-3喷射的喷嘴设计提供了重要的设计依据。     

DDS中相位截断效应分析及其改善方法

分析了在直接数字频率合成（ＤＤＳ）中引起杂散的相位截断效应,针对其引起的杂散特点讨论了一种通过加入伪随机数改善杂散谱分布的方法,并通过计算机仿真进行了验证。