K640合金TLP连接接头组织及力学性能

为考察瞬时液相(TLP)连接方法对钴基高温合金K640合金的适用性,采用非晶态中间层进行连接试验,观察接头区显微组织,测试接头的力学性能并进行断口分析。结果表明:瞬时液相连接能够实现K640合金的良好结合,接头组织致密,成分均匀,组织与成分均与母材接近;接头高温拉伸强度达到等条件下母材强度74%,断口具有明显的韧窝形貌;高温持久强度达到等条件下母材强度的70%以上。     

一种低轨星座高精度相位保持方法

针对大型低轨星座在轨运行的高精度构型保持问题,提出了一种基于极限环的高精度相位保持方法。首先,推导了实际轨道与参考轨道的平相位角偏差与半长轴偏差的关系；然后,建立了基于极限环的相位保持周期以及半长轴改变量计算方法；最后,基于推导的半长轴偏差与相位偏差的关系,提出了一种相位保持实施方法。考虑地球非球形和大气阻力的数值仿真表明：本文提出的相位保持方法能够在卫星定轨数据精度不高、数据采样间隔较大的情况下,实现低轨星座系统的高精度相位保持。     

Lock threshold deterioration induced by antenna vibration and signal coupling effects in hypersonic vehicle carrier tracking system of Ka band

The envelope of a hypersonic vehicle is affected by severe fluctuating pressure, which causes the airborne antenna to vibrate slightly. This vibration mixes with the transmitted signals and thus introduces additional multiplicative phase noise. Antenna vibration and signal coupling effects as well as their influence on the lock threshold of the hypersonic vehicle carrier tracking system of the Ka band are investigated in this study. A vibration model is initially established to obtain phase noise in consideration of the inherent relationship between vibration displacement and electromagnetic wavelength. An analytical model of the Phase-Locked Loop(PLL), which is widely used in carrier tracking systems, is established. The coupling effects on carrier tracking performance are investigated and quantitatively analyzed by imposing the multiplicative phase noise on the PLL model. Simulation results show that the phase noise presents a Gaussian distribution and is similar to vibration displacement variation. A large standard deviation in vibration displacement exerts a significant effect on the lock threshold. A critical standard deviation is observed in the PLL of Binary Phase Shift Keying(BPSK) and Quadrature Phase Shift Keying(QPSK) signals. The effect on QPSK signals is more severe than that on BPSK signals. The maximum tolerable standard deviations normalized by the wavelength of the carrier are 0.04 and 0.02 for BPSK and QPSK signals,respectively. With these critical standard deviations, lock thresholds are increased from à12 andà4 d B to 3 and à2 d B, respectively.     

Evaluation of rapid phase clock/bias products for PPP ambiguity resolution and its application to the M7.1 2019 Ridgecrest,California earthquake

Precise point positioning with ambiguity resolution (PPP-AR) is a useful tool for high-precision geodetic and geophysical applications, while phase bias products are the prerequisite to implement PPP-AR. Wuhan University has been providing the final (the best operationally post-processing solution based) phase clock/bias products with a latency of two weeks since March of 2019, while a dedicated open-source software package PRIDE PPP-AR is released to leverage these products for high-precision positioning. In order to satisfy some both time and precision critical applications, such as rapid earthquake response, Wuhan University also released rapid (with comparable quality but with much shorter delivery latency) phase clock/bias products with a latency of less than 24 h and updated PRIDE PPP-AR in July 2019. We first introduce the phase clock/bias generation and validation schemes and the maintenance of routine products provision. Then, with 14 days (July 2 to July 15 in 2019) of GPS data collected from 146 globally distributed IGS (International GNSS Service) stations, we evaluated the positioning performance of the rapid products with respect to their final counterparts. It is found that positioning precision of PPP-AR using rapid products is comparable to that using final products, especially in kinematic positioning mode. When rapid products are used, the RMS of PPP-AR in static mode with respect to IGS weekly solutions can reach 1.7 mm, 1.8 mm and 5.5 mm in the east, north and up components, respectively. Furthermore, the RMS of epoch-wise positions with respect to daily solutions for the east, north and up components are 0.51 cm, 0.57 cm and 1.51 cm for PPP-AR with rapid products in kinematic mode. It demonstrates that the rapid phase clock/bias products can sufficiently meet the precision requirement of most geodetic and geophysical applications yet with much shorter time delay. Finally, we study the July 6th M7.1 2019 Ridgecrest, California earthquake using the rapid phase clock/bias products and demonstrate their comparable performance against the final products.     

基于相位差的转轴扭矩测量中的零位识别与处理

提出了一种基于相位差原理的转轴扭矩测量中的零位识别与处理方法。采用两路反射式模拟输出激光光强传感器和对应的反射色带，形成两路标准的正弦信号，通过同步采样和幅度归一化处理，得到两路信号的瞬时相位差，并依此实现对转轴扭矩载荷的测试，克服了以往基于脉冲信号测量中无法在静态条件下进行零位校正的困难。对该系统实现的关键技术和参数进行了分析，通过模拟信号输入和标准扭转试验台验证了本文所提出的方法的应用效果。理论和实验结果表明，该方法不需要转轴转动，就可以准确识别其零位，从而大大降低了该技术在现场使用中的调校要求。     

Long-term time-varying characteristics of UPD products generated by a global and regional network and their interoperable application in PPP

The quality and availability of Uncalibrated Phase Delay (UPD) solutions are crucial to the Precise Point Positioning (PPP) service, and the long-term temporal variability and its contributing factors should be better understood. In this paper, we comprehensively investigate the long-term time-varying characteristics of each UPD product respectively generated by a global and regional network and their interoperable application in PPP-AR (ambiguity resolution), the sampling of the WL and NL UPDs are daily and 30 s, respectively. Firstly, in terms of our 30 day Wide-Lane (WL) UPD products of 31 satellites, the Standard Deviation (STD) of each satellite WL UPDs ranges from 0.04 to 0.06 cycles, indicating that the long-term prediction accuracy of satellite WL UPD is sufficient for fixing Wide-Lane ambiguities. Secondly, when a satellite in eclipsing the discontinulity may corrupt the determination of Narrow-Lane (NL) UPD in form of offset, as a result of lacking or poor satellite attitude dynamic modeling. When the influence of discontinuity is removed, the STD of our estimated satellite NL UPDs is less than 0.05 cycles. Thirdly, the STD of our estimated receiver WL UPDs is mainly below 0.2 cycles, which implies that its stability is one order poorer that of the satellite. In addition, if they are used for stations in and around the network covered region, the stability of the UPD products from the CMONOC (Crustal Movement Observation Network of China) is better than that from a global network, benefit from the fact that all the CMONOC stations are equipped with the same receiver type. Finally, the PPP-AR results show that a rate of 82.9% for stations with a WL-ambiguity-fixed rate of over 90% while 69.5% for stations with an NL-ambiguity-fixed rate of over 80% can be achieved when using UPD from the global network, which is worse than that of using UPD from the CMONOC (85.7% for stations with a WL-ambiguity-fixed rate of over 90% while 75% for stations with an NL-ambiguity-fixed rate of over 80%). The results of the experiment on the UPD interoperable application in PPP show that the global network UPD products can provide a fast AR at any single station, and the convergence time is well below 25 min. Particularly, when the location of a station is in and around the regional network, our results show that the PPP results obtained using regional UPDs enable the consistent use of global UPDs. When the location of a station is far away from the regional network, using the regional UPDs can not achieve PPP-AR. Finally, the WL UPDs of the previous day is used for forecasting to estimate the NL UPDs, the stability analysis results of NL UPDs solution and positioning results are demonstrate the validity of forecasted UPD products.     

The effect of collisions in ionogram inversion

The results of this paper demonstrate that the effect of collisions on the group refraction index is small, when the ordinary ray is considered. If, however, in order to improve the performance of a system for automatic interpretation of ionograms, the information contained in ordinary and extraordinary traces is combined, the effect of collisions between the electrons and neutral molecules should be taken into account for the extraordinary ray. The magnitude of these differences is generally very small and must be compared with the resolution in the virtual vertical height of the ionosonde, resolution which is typically of the order of few kilometers.     

宽频带中频相位计的研制

比较全面地介绍了-宽带中频相位计的研制过程。论述了相位计的工作原理,给出了系统框图。对各个部件的设计做了介绍,并给出了相位计所达到的技术指标。还介绍了系统测试方法和检定方法,对系统的误差做了分析,并给出了理论计算误差与实测误差的对应关系,提出了今后的进一步设想。     

Individual influence of pitching and plunging motions on flow structures over an airfoil during dynamic stall

The individual influence of pitching and plunging motions on flow structures is studied experimentally by changing the phase lag between the geometrical angle of attack and the plunging angle of attack. Five phase lags are chosen as the experimental parameters, while the Strouhal number, the reduced frequency and the Reynolds number are fixed. During the motion of the airfoil, the leading edge vortex, the reattached vortex and the secondary vortex are observed in the flow field. The leading edge vortex is found to be the main flow structure through the proper orthogonal decomposition. The increase of phase lag results in the increase of the leading edge velocity, which strongly influences the leading edge shear layer and the leading edge vortex. The plunging motion contributes to the development of the leading edge shear layer, while the pitching motion is the key reason for instability of the leading edge shear layer. It is also found that a certain increase of phase lag, around 34.15° in this research, can increase the airfoil lift.