线谱对(LSP)分析在G.729语音编码算法中的应用

本文介绍了线谱对(Linear Spectrum Pair,LSP)分析的基本原理及其在G.729中的应用,同时分析比较了LSP参数与常用的线性预测系数LPC的区别,仿真结果表明,LSP参数的抗干扰能力远比LPC系数的抗干扰能力强。     

PREDICTION OF MECHANICAL PROPERTY OF WHISKER REINFORCED METAL MATRIX COMPOSITE: PART-Ⅰ. MODEL AND FORMULATION

Based on study of strain distribution in whisker reinforced metal matrix composites, an explicit precise stiffness tensor is derived. In the present theory, the effect of whisker orientation on the macro property of composites is considered, but the effect of random whisker position and the complicated strain field at whisker ends are averaged. The derived formula is able to predict the stiffness modulus of composites with arbitrary whisker orientation under any loading condition. Compared with the models of micro-mechanics, the present theory is competent for modulus prediction of actual engineering composites. The verification and application of the present theory are given in a subsequent paper published in the same issue.     

基于MCMC的PLP未来强度的Bayesian预测分析

在无信息先验分布下，将Gibbs抽样与Metropolis-Hastings算法相结合的方法应用于幂律过程的未来强度的Bayesian预测。该预测方法能将时间截尾数据和失效截尾数据统一分析，并给出在未来某一时刻处强度函数的MCMC样本，利用该样本可以方便地获得关于未来某一时处刻强度函数及其函数的各种后验分析。一个经典工程数值算例说明了预测方法的可行性、合理性与有效性。     

A new approach to solar cycle forecasting

We describe a novel approach for determining the timing of the solar cycle and tracking its evolution relative to other cycles. This method also has predictive capability for forecasting the cycle “onset.” Based on current trends, we expect that Cycle 23 will be about 1 year longer than the previous two cycles.     

数字存储示波器的原理,特点及发展动态

较全面的描述了示波器的发展动态，着重分析了数字示波器的工作原理、功能和特点。最后介绍了国外最新动态。     

Using PoF models to predict system reliability considering failure collaboration

Existing Physics-of-Failure-based (PoF-based) system reliability prediction methods are grounded on the independence assumption, which overlooks the dependency among the compo-nents. In this paper, a new type of dependency, referred to as failure collaboration, is introduced and considered in reliability predictions. A PoF-based model is developed to describe the failure behavior of systems subject to failure collaboration. Based on the developed model, the Bisection-based Reliability Analysis Method (BRAM) is exploited to calculate the system reliabil-ity. The developed methods are applied to predicting the reliability of a Hydraulic Servo Actuator (HSA). The results demonstrate that the developed methods outperform the traditional PoF-based reliability prediction methods when applied to systems subject to failure collaboration.     

空间环境对聚合物基复合材料性能的影响分析

文章介绍了空间飞行器工作过程中的空间环境条件。为满足这些要求 ,在设计与选材时须考虑一些因素。此外对某型号任务中使用的P75S/环氧 6 48复合材料耐空间环境条件的性能做了简要评述     

超燃冲压发动机性能的准二维计算方法

为了能在双模态超燃冲压发动机流道方案初步论证中提供一种较快速的发动机性能计算方法,在二维N-S方程基础上,引入一维完全燃烧计算方法,提出了预估超燃冲压发动机性能的准二维计算方法.该方法能够计入激波、边界层分离等对发动机性能的影响,可在较短时间计算出整机推力、比冲性能和沿程热力学参数.通过对自由射流发动机计算,验证了此方法.并在此基础上,初步分析了燃料喷注位置和流道构型对发动机性能的影响.     

舰载机理想着舰点垂直运动的预估与补偿

理想着舰点的垂直运动是影响着舰精度和安全的一个主要因素,因此必须加强舰载机对理想着舰点垂直运动的同步跟踪能力.为此,提出对理想着舰点垂直运动的位置和速度信号进行预估和补偿的方法,将垂直运动的位置和速度信号经过预估和补偿后分别引入到纵向自动着舰引导系统和飞控系统的垂向速度通道中,使得舰载机可以准确跟踪理想着舰点的垂直运动,以减小甲板运动对着舰的影响.针对不同海况条件,对设计的补偿器和预估器进行仿真验证,并与其他方法进行比较.结果表明本文提出的理想着舰点垂直运动预估与补偿方法可有效地补偿由甲板运动引起的着舰误差,显著提高了着舰的安全性和精确性.     

CFD predictions of LBO limits for aero-engine combustors using fuel iterative approximation

Lean blow-out (LBO) is critical to operational performance of combustion systems in propulsion and power generation. Current predictive tools for LBO limits are based on decadesold empirical correlations that have limited applicability for modern combustor designs. According to the Lefebvre’s model for LBO and classical perfect stirred reactor (PSR) concept, a load parameter (LP) is proposed for LBO analysis of aero-engine combustors in this paper. The parameters contained in load parameter are all estimated from the non-reacting flow field of a combustor that is obtained by numerical simulation. Additionally, based on the load parameter, a method of fuel iterative approximation (FIA) is proposed to predict the LBO limit of the combustor. Compared with experimental data for 19 combustors, it is found that load parameter can represent the actual combustion load of the combustor near LBO and have good relativity with LBO fuel/air ratio (FAR). The LBO FAR obtained by FIA shows good agreement with experimental data, the maximum prediction uncertainty of FIA is about ±17.5%. Because only the non-reacting flow is simulated, the time cost of the LBO limit prediction using FIA is relatively low (about 6 h for one combustor with computer equipment of CPU 2.66 GHz · 4 and 4 GB memory), showing that FIA is reliable and efficient to be used for practical applications.