基于随机参数逆高斯过程的加速退化建模方法

为了将随机参数退化模型应用于加速退化试验以提高可靠性评估结果的准确性,本文以逆高斯过程为例研究了基于随机参数退化模型的加速退化建模方法。利用加速系数不变原则推导出逆高斯过程各参数在不同应力下应满足的关系式,由此建立参数的加速模型,计算出加速系数,进而将加速应力下的退化数据等效折算到工作应力下。采用了随机参数的共轭先验分布,并且利用最大期望算法估计出随机参数的超参数值。仿真试验验证了所提方法的可行性和有效性,实例应用说明了所提方法具有较好的工程应用价值。      

深空探测用锂离子蓄电池在轨管理策略研究

高轨卫星、深空探测器在工作周期内地影时间较短,储能电池长期处于搁置状态,而在存储过程中由于界面副反应的存在会导致持续的锂离子电池容量衰降,影响储能电池的使用寿命。通过dV/dQ曲线分析、交流阻抗分析和解剖分析发现在存储过程中活性Li损失是导致锂离子电池容量损失的主要原因,在100%SoC状态时还会导致电解液在负极表面的分解加剧,引起正极的界面膜阻抗R_(SEI)和颗粒间接触阻抗R_(CR)出现明显的增加。研究结果表明:深空探测器电源系统在存储期间为了减少过放电风险,并减少不可逆容量损失,应将蓄电池的荷电状态控制在20%SoC左右,并定期进行充电。     

复合材料格栅结构研究进展与应用

介绍了格栅复合材料的结构特征及其制备工艺。同时,对复合材料格栅结构分析设计、性能测试和该结构在航空、航天工程中的应用现状进行了概述。     

A Novel Onboard-gateway-based Mechanism to Improve TCP Performance in Aeronautical Satellite Networks

The IP-based networks on aircraft serve to support Internet services via satellites. However, in aeronautical satellite hybrid net- works,the TCP protocol performance often deteriorates due to improper decreases and slow recovery of the congestion window. This paper proposes a window size determination and notification mechanism, onboard-gateway-based mechanism (OGBM), which is based on the onboard gateway in the networks on aircraft. A cross-layer approach is adopted by the onboard gateway to obtain the satellite link bandwidth information. And then, by the gateway, through changing the receiver’s advertised window field in ACK packets, TCP sources are notified of the window size of each TCP source calculated on the ground of bandwidth delay product and flow numbers. The mechanism is able to avoid improper changes of TCP window and serve multiple users. Simulation results show that the mechanism with the fairness index close to 1 improves TCP performance in aeronautical satellite networks.     

Experimental Study on Effects of Fuel Injection on Scramjet Combustor Performance

In order to investigate the effects of fuel injection distribution on the scramjet combustor performance, there are conducted three sets of test on a hydrocarbon fueled direct-connect scramjet test facility. The results of Test A, whose fuel injection is carried out with injectors located on the top-wall and the bottom-wall, show that the fuel injection with an appropriate close-front and centralized distribution would be of much help to optimize combustor performances. The results of Test B, whose fuel injection is performed at the optimal injection locations found in Test A, with a given equivalence ratio and different injection proportions for each injector, show that this injection mode is of little benefit to improve combustor performances. The results of Test C with a circumferential fuel injection distribution displaies the possibility of ameliorating combustor performance. By analyzing the effects of injection location parameters on combustor performances on the base of the data of Test C, it is clear that the injector location has strong coupled influences on combus- tor performances. In addition, an inner-force synthesis specific impulse is used to reduce the errors caused by the disturbance of fuel supply and working state of air heater while assessing combustor performances.     

GEO卫星热控涂层αS退化空间综合环境模拟试验

文章用综合低能辐照试验模拟15年地球同步轨道环境对热控材料S781白漆、SR107-ZK白漆、镀银FEP、OSR片的太阳吸收率退化趋势。有机白漆有严重退化,而OSR和 镀银FEP材料退化较少。通过与飞行试验结果比较,证明了本次模拟试验的有效性。通过利用退化趋势的试验数据,应用最小二乘法获得退化数学模型。二次指数退化模型与4种材料退化曲线符合较好。更长试验时间结果可以通过数学模型外推的方法获得。经试验验证,用8年试验数据外推15年数据误差不超过1%。     

信息安全绩效测量体系研究

绩效管理是指组织内各级管理者和员工为了达到组织目标共同参与的绩效计划制定、绩效辅导沟通、绩效考核评价、绩效结果应用、绩效目标提升的持续循环过程,绩效管理的目的是持续提升个人、部门和组织的绩效。良好的绩效管理体系能够激发管理者和员工的工作积极性、创造性,自发改进组织目标的实现过程,提高目标实现的效率和效果。相反,糟糕的绩效管理体系给组织带来的负面影响也是巨大的。信息安全管理是组织管理的重要组成部分。本文立足组织信息安全管理,重点研究信息安全绩效测量体系制定环节,结合国际国内相关标准,剖析信息安全绩效测量体系的设计方法,分享设计思路。     

A two-step weighted least-squares method for joint estimation of source and sensor locations: A general framework

It is well known that the Two-step Weighted Least-Squares(TWLS) is a widely used method for source localization and sensor position refinement. For this reason, we propose a unified framework of the TWLS method for joint estimation of multiple disjoint sources and sensor locations in this paper. Unlike some existing works, the presented method is based on more general measurement model, and therefore it can be applied to many different localization scenarios.Besides, it does not have the initialization and local convergence problem. The closed-form expression for the covariance matrix of the proposed TWLS estimator is also derived by exploiting the first-order perturbation analysis. Moreover, the estimation accuracy of the TWLS method is shown analytically to achieve the Cramér-Rao Bound(CRB) before the threshold effect takes place. The theoretical analysis is also performed in a common mathematical framework, rather than aiming at some specific signal metrics. Finally, two numerical experiments are performed to support the theoretical development in this paper.     

SABRE预冷器计算模型及其在整机模型中的应用

预冷器的性能对SABRE等预冷组合循环发动机具有重要影响,为实现发动机方案设计阶段预冷器的快速设计与评估,建立了预冷器准二维快速评估模型。将SABRE预冷器的几何结构简化为一个扇环形区域,沿径向和周向将该区域划分为二维节点。应用守恒方程及传热关联式完成单个节点计算,再求解节点矩阵的平衡方程组,计算内外流体特定节点上参数的二维分布,得到预冷器出口参数。将模型嵌入发动机总体性能程序中,实现了发动机设计及非设计点的预冷器性能计算的功能。与文献数据对比结果表明,预冷器模型传热计算误差小于5%,摩擦阻力误差小于10%。整机计算结果显示,Ma0~5范围内,预冷器空气侧温降范围为143K至932K,温降随飞行马赫数升高单调上升。预冷器传热有效度范围为0.896-0.945,空气侧总压恢复系数范围为0.852-0.904。