Passive inter-modulation scattering analysis of reflector considering contact nonlinearity

 Passive inter-modulation (PIM) is a form of nonlinear distortion caused by the inherent nonlinearities of the passive devices and components in RF/microwave system. It will degenerate the performance of communication system with broad-band channel and high-sensitivity receiver. Therefore, it is necessary to construct a model to simulate this process in order to predict the level of PIM. This paper is aimed at constructing some plate models with one-dimensional and two-dimensional contact nonlinearity sections illuminated by two-tone waves, and calculating the scattered field at a fixed-point in space using time-domain physical optics method. By taking fast Fourier transform (FFT), we get the spectrum of the scattered field and then analyze the generated PIM products. At the end of this paper, some numerical examples are presented to show the influence rules of the relative factors on PIM. The results indicate the variation of the level of PIM with the number of the nonlinear regions, the nonlinear spacing, and the incident power levels.     

Libration point orbits for lunar global positioning systems

With the development of lunar exploration, a lunar global positioning system (LGPS) is demanded for both on-ground and in-flight lunar exploration missions. The traditional configuration of constellation requires at least eighteen satellites to cover the whole lunar surface continuously. In this paper, the configurations of the libration point orbits (LPOs) constellations are investigated. By using the constellations on the Earth–Moon _L1$L_1$ and _L2$L_2$ LPOs, the basic functions of the LGPS can be realized by using eight to fourteen satellites. First, the LPO and the combinations of LPOs, which can be used in the constellations of the LGPS, are investigated. The criteria and procedures of the configuration design are introduced. Second, the configurations of LPOs constellations are investigated in the Earth–Moon circular-restricted three-body problem (CR3BP). The size of the LPOs and the distribution of the satellites on these LPOs are determined by using an exhaustive algorithm and a global optimization method, respectively. The key performance parameters of these constellations are computed. Third, the constellations with good performance in the CR3BP are redesigned in the more accurate Earth–Moon based Sun-perturbed bicircular four-body problem (B4BP). Moreover, in order to avoid the ground coverage problem caused by the perturbation of the Sun, some modifications are implemented, and the configuration of the no blind area LGPS in the B4BP is obtained.     

基于无源光网络的高速光纤总线技术研究

随着航天遥感类载荷性能的提高,其数据量大幅增加,对高速数据传输提出了更高要求.针对航天环境的高可靠性要求,提出了一种基于命令响应式协议的新型高速光纤总线结构,即把无源光网络技术与FC-AE-1553协议相结合,采用高生存性的逆向双环的冗余拓扑结构搭建了地面演示验证系统.实验表明,新的光纤总线系统通信速率可达2.5Gbps,容易隔离失效节点,所用设备简单,可靠性高,满足航天工程应用需求,具有较强的实用价值.     

高超声速进气道附面层分离无源被动控制

为了控制超燃冲压发动机进气道唇口反射激波诱导的附面层分离,根据其流动特征,提出了附面层泄除-吹除互相驱动的自适应、无源、被动控制方案。并采用空间HLLE格式、LU-SGS隐式推进、多块结构网格的有限体积法数值模拟程序对该流动现象进行了数值模拟。数值结果表明,施加自适应无源被动控制后,分离区长度减小为无控制时的45%,控制区域的总压恢复系数和流场均匀性提高。从而证实了自适应、无源、被动控制抑制高超声速进气道附面层分离的可行性。     

InSAR成像匹配制导技术

为了解决飞行器远程全天候高精度自主导航的问题,提出一种InSAR成像匹配制导技术,利用InSAR生成的高程数据与基准高程图进行精确匹配,并通过构象模型反演出飞行器的空间位置。分析对比了多种精确地形匹配方法,采用基于F.Leberl数学模型的空间定位方法并分析了误差影响。仿真结果表明,该方法可以实现飞行器高精度自主导航定位,大大提高飞行器的适应性和抗干扰能力。     

基于迭代容积滤波的无源跟踪算法

对无源目标跟踪问题进行了研究,给出一种只有角度和距离测量的目标跟踪算法。为提高估计的精度和数值稳定性,采用了容积滤波算法,并用基于龙贝格-马尔塔(LM)算法改进迭代容积滤波算法,以提高估计精度,算法实现了对目标的无源跟踪。仿真结果表明:迭代容积滤波算法的跟踪效果更好。     

32颗GPS卫星星座空间覆盖特性建模与仿真

GPS卫星要准确完成定位功能可见卫星数应不少于4颗.通过建立针对低轨、中高轨和大椭圆轨道目标卫星的GPS信号空间几何覆盖模型,利用Matlab计算针对低轨、中高轨和大椭圆轨道的可见卫星数,对目前美国32颗GPS卫星星座的空间覆盖特性进行仿真.仿真结果显示,32颗GPS卫星星座不仅可以对低轨目标实现全轨道覆盖,而且对中高轨和大椭圆轨道也有所覆盖,大大扩展了24颗GPS卫星星座的空间应用.     

航空声纳浮标定位的数据融合方法研究

声纳浮标由于受到多种随机因素的干扰,定位精度相差很大,在对具有一定散布海域的潜艇目标进行探测时,往往会投放多枚定位浮标,出现数据冗余的现象。针对这一问题,本文提出了浮标定位算法中的一种数据融合算法;并分析了加权融合和非线性最小二乘数据融合的方法,最后通过仿真验证了这种算法的有效性和可行性。     

一种新的星载GPS定轨滤波算法

针对传统EKF(Extended Kalman Filtering)算法应用于星载GPS(Global Positioning System)低轨卫星定轨时系统噪声方差初值不易确定的问题,提出了一种新的定轨滤波算法.该算法在非线性方程线性化过程中,在前一时刻滤波估值点进行线性化,从而得到扰动方程,并将该扰动方程引入到传统EKF进行滤波处理.该算法与传统EKF分别应用在星载GPS低轨卫星的定轨中,通过比较,结果表明改进的算法在一定程度上抑制了由于系统噪声方差阵选取偏差较大而引起的滤波发散现象,且对于系统噪声方差的初值选取有较强的鲁棒性.      

用于识别两颗故障卫星的RAIM算法

提出了一种可以识别两颗故障卫星的接收机自主完好性监测算法.将最优奇偶矢量法应用于两颗故障卫星识别,指出由于故障偏差可能会抵消而使得正确识别率较低.对最优奇偶矢量法进行了改进,利用对单颗卫星故障敏感的最优奇偶矢量对所有可能的两颗故障卫星组合分别构造两个新的奇偶矢量,用于两颗故障卫星的检测和识别.计算机仿真结果显示,改进后的算法与直接利用最优奇偶矢量法相比,可以显著提高两颗故障卫星正确识别率,识别率可超过90%.同时,改进算法的奇偶矢量构造方法简单,计算量将减少90%以上,更有利于工程实现.