复合材料层板纯剪实验

本文提出一个测量复合材料层板面内剪切性质的方板纯剪试验法。首先对方法的可靠性进行试验检验,然后对两种复合材料层板的剪切行为进行试验。     

Reliable flight performance assessment of multirotor based on interacting multiple model particle filter and health degree

Multirotor has been applied to many military and civilian mission scenarios. From the perspective of reliability, it is difficult to ensure that multirotors do not generate hardware and software failures or performance anomalies during the flight process. These failures and anomalies may result in mission interruptions, crashes, and even threats to the lives and property of human beings. Thus, the study of flight reliability problems of multirotors is conductive to the development of the drone industry and has theoretical significance and engineering value. This paper proposes a reliable flight performance assessment method of multirotors based on an Interacting Multiple Model Particle Filter (IMMPF) algorithm and health degree as the performance indicator. First, the multirotor is modeled by the Stochastic Hybrid System (SHS) model, and the problem of reliable flight performance assessment is formulated. In order to solve the problem, the IMMPF algorithm is presented to estimate the real-time probability distribution of hybrid state of the established SHS-based multirotor model, since it can decrease estimation errors compared with the standard interacting multiple model algorithm based on extended Kalman filter. Then, the reliable flight performance is assessed with health degree based on the estimation result. Finally, a case study of a multirotor suffering from sensor anomalies is presented to validate the effectiveness of the proposed method.     

基于PSO算法的半球谐振陀螺惯导系统陀螺温度补偿方法

针对半球谐振陀螺受温度影响出现零位漂移的问题，以测温电路温度为基准，建立温度频率函数实时解算温度，提出一种基于粒子群优化(PSO)算法的半球谐振陀螺惯导系统陀螺温度补偿方法。在求解温度时，需要先将温度频率函数转换为一元三次方程，存在测试计算量大的问题。引入逆向拟合思想，建立频率温度函数，提高陀螺输出温度实时性和降低测试计算量，替代了传统陀螺测温硬件电路，为惯导系统轻小型设计提供新思路。考虑温度变化、温度变化率以及两者的交叉项，建立温度补偿模型，引入PSO算法求解模型系数。温度试验结果表明，在温箱温度为-40~50 ℃内，补偿后的半球谐振陀螺的零偏稳定性较补偿前提升了46％。     

Theory of fragmented energy release in the Sun

The magnetic energy released inside an active region is closely related to its formation and evolution. Following the evolution of a collection of flux tubes inside the convection zone and above the photosphere we can show that many nonlinear structures (current sheets, shock waves, double layers etc.) are formed. We propose in this review that coronal heating, flares and particle acceleration are due to the interaction of the plasma with these nonlinear structures. Approaching active regions as a driven complex dynamical system we can show that several coherent ensembles of the nonlinear structures will appear spontaneously. The statistical analysis of these structures is a major problem in solar physics. We can also show that many observed large scale structures are the result of the convolution of non-observable fragmentation in the energy release process.     

Distribution and variability of accelerated electrons at Mars

We investigate accelerated electrons observed by Mars Global Surveyor (MGS), using data from the Electron Reflectometer (ER) instrument. We find three different types of accelerated electron events. Current sheet events occur over regions with weak or no crustal fields, have the highest electron energy fluxes, and are likely located on draped magnetotail fields. Extended events occur over regions with moderate crustal magnetic fields, and are most often observed on closed magnetic field lines. Localized events have the lowest energy fluxes, occur in strong magnetic cusp regions, and are the most likely kind of event to be found on open magnetic field lines. Some localized events have clear signatures of field-aligned currents; these events have much higher electron fluxes, and are preferentially observed on radially oriented open magnetic field lines. Electron acceleration events, especially localized events, are similar in many ways to events observed in the terrestrial auroral zone. However, physical processes related to those found in the terrestrial cusp and/or plasmasheet could also be responsible for accelerating electrons at Mars.     

Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry (PIV) techniques. There are three near-wall topological patterns with different Angles of Attack (AoAs): the separation bubble, the Leading-Edge Vortex (LEV) and the high AoAs flow. For the separation bubble pattern, two saddles and two foci form in the middle of the model. The features of the LEV pattern are the leading-edge separation lines. The topological characteristics of the separation lines are changed by the interaction between the LEV and the Wing-Tip Vortex (WTV). For the high AoAs flow pattern, four unstable foci are found at the forewing and the hindwing respectively. The angle between the trajectory of the WTV and the model increases with increasing AoA even though the slope of the WTV angle versus AoA curve declines at the moderate AoAs.     

Formation flying reconfiguration manoeuvres via environmental forces in highly elliptical orbits

A study on reconfiguration manoevres applied to a tetrahedral formation in highly elliptical orbits is proposed, by using a propellantless solution. The manoeuvring strategy consists in exploiting certain environmental forces, specifically those provided by solar radiation pressure and atmospheric drag, by actively controlling the satellites’ attitudes. Through inverse dynamics particle swarm optimization the optimal attitudes required for the manoeuvres are evaluated, whereas the configuration’s evolution is simulated by a high-fidelity orbital simulator. The goal of the reconfiguration problem is to find an optimal control in order for the four spacecraft to reach a desired configuration in a specified portion of orbit, where the desired configuration is evaluated by a shape and size geometric parameter. By increasing the manoeuvring time and the satellites’ area to mass ratio, all the case studies considered are successfully verified.     

Application of a PCA-DBN-based surrogate model to robust aerodynamic design optimization

An efficient method employing a Principal Component Analysis (PCA)-Deep Belief Network (DBN)-based surrogate model is developed for robust aerodynamic design optimization in this study. In order to reduce the number of design variables for aerodynamic optimizations, the PCA technique is implemented to the geometric parameters obtained by parameterization method. For the purpose of predicting aerodynamic parameters, the DBN model is established with the reduced design variables as input and the aerodynamic parameters as output, and it is trained using the k-step contrastive divergence algorithm. The established PCA-DBN-based surrogate model is validated through predicting lift-to-drag ratios of a set of airfoils, and the results indicate that the PCA-DBN-based surrogate model is reliable and obtains more accurate predictions than three other surrogate models. Then the efficient optimization method is established by embedding the PCA-DBN-based surrogate model into an improved Particle Swarm Optimization (PSO) framework, and applied to the robust aerodynamic design optimizations of Natural Laminar Flow (NLF) airfoil and transonic wing. The optimization results indicate that the PCA-DBN-based surrogate model works very well as a prediction model in the robust optimization processes of both NLF airfoil and transonic wing. By employing the PCA-DBN-based surrogate model, the developed efficient method improves the optimization efficiency obviously.     

织物细观结构参数对编织复合材料弹性性能的影响

根据作者提出的二维波纹细观力学模型,在考虑了实际织物结构中存在的经向和纬向纤维的波纹;相邻纤维束之间的间隙;纤维束的横截面尺寸和织物的叠层构造状态对编织复合材料弹性性能的影响下,给出了织物细观结构参数与编织复合材料弹性性能之间的变化关系。通过参数分析探讨了不同结构参数对编织复合材料弹性性能的影响。     

树脂基碳纤维复合材料的热物理性能之一——导热系数

本文讨论了树脂基碳纤维复合材料热导与各种纤维体积含量V_f及温度的关系,研究了树脂基碳纤维复合材料的传热机理,并给出了大量的导热系数数据。