Near-wall topological patterns and flow structures over a simplified Danaus plexippus model

Studies on the high-lift mechanisms of butterfly gliding flights shed light on the design of the micro air vehicles. The flow field around a simplified Danaus plexippus model is investigated using the hydrogen bubble visualization and the Particle Image Velocimetry(PIV) techniques.There are three near-wall topological patterns with different Angles of Attack(AoAs): the separation bubble, the Leading-Edge Vortex(LEV) and the high Ao As flow. For the separation bubble pattern, two saddles and two ...     

柱面菲涅耳太阳聚光透镜的光学设计和光学效率

研究了柱面线聚焦菲涅耳太阳聚光透镜的光学设计和光学效率。依据理论分析，对透镜参数进行了优化设计，成功地研制出了柱面线聚焦菲涅耳聚光透镜。还分析了透镜相对孔径（F数）和成型模具等因素对透镜光学效率的影响。     

面向对地成像观测任务的高空飞艇应急调度

针对应急条件下高空飞艇(HAA)对地成像观测任务调度问题进行研究,分析了问题中的主要约束条件,建立了以任务收益(TB)和巡航距离为优化目标的约束满足问题(CSP)模型。考虑飞艇侦察载荷具有侧摆观测能力,在构建视场范围约束模型和分辨率约束模型的基础上,对成像观测任务进行合成。提出了元任务与合成任务的概念,给出了任务合成的步骤与方法。将HAA应急调度问题转换为车辆路径问题(VRP),并进一步分解为任务排序主问题和路径选择子问题,分别应用改进粒子群(IPSO)算法和关键节点搜索(KNS)算法求解。详细介绍了算法中的编码、解码和移动等操作,以及采用的混沌初始化和禁忌搜索(TS)策略。通过仿真实验,对文中所提方法的有效性进行了验证。     

基于改进粒子群优化模糊控制的MPPT算法研究

在光照强度和温度变化时,常规的最大功率点跟踪(MPPT)算法难以快速准确地跟踪光伏系统最大功率点。针对此问题,设计了一种改进粒子群优化算法(PSO)的模糊控制器。首先,依据常规MPPT特性,设计了一种带调整因子的模糊控制算法以快速收敛到最大功率点;然后,采用参数自适应PSO对设计的模糊控制器调整因子进行动态优化。仿真结果表明:所设计的参数自适应PSO优化模糊控制器能快速准确地跟踪最大功率点,保证了MPPT的动态响应速度和稳态精度,提高了光伏系统的工作效率。     

Thermosphere densities derived from Swarm GPS observations

After the detection of many anomalies in the Swarm accelerometer data, an alternative method has been developed to determine thermospheric densities for the three-satellite mission. Using a precise orbit determination approach, non-gravitational and aerodynamic-only accelerations are estimated from the high-quality Swarm GPS data. The GPS-derived non-gravitational accelerations serve as a baseline for the correction of the Swarm-C along-track accelerometer data. The aerodynamic accelerations are converted directly into thermospheric densities for all Swarm satellites, albeit at a much lower temporal resolution than the accelerometers would have been able to deliver. The resulting density and acceleration data sets are part of the European Space Agency Level 2 Swarm products.To improve the Swarm densities, two modifications have recently been added to our original processing scheme. They consist of a more refined handling of radiation pressure accelerations and the use of a high-fidelity satellite geometry and improved aerodynamic model. These modifications lead to a better agreement between estimated Swarm densities and NRLMSISE-00 model densities. The GPS-derived Swarm densities show variations due to solar and geomagnetic activity, as well as seasonal, latitudinal and diurnal variations. For low solar activity, however, the aerodynamic signal experienced by the Swarm satellites is very small, and therefore it is more difficult to accurately resolve latitudinal density variability using GPS data, especially for the higher-flying Swarm-B satellite. Therefore, mean orbit densities are also included in the Swarm density product.     

PREDICTION OF SURFACE ROUGHNESS FOR END MILLING TITANIUM ALLOY USING MODIFIED PARTICLE SWARM OPTIMIZATION LS-SVM

It is difficult to construct the prediction model for titanium alloy through analyzing the formation mecha- nism of surface roughness due to the complicated relation between influential factors and surface roughness. A no- vel algorithm based on the modified particle swarm optimization （PSO） least square support vector machine （LS- SVM） is proposed to predict the roughness of the end milling titanium alloys. According to Taguchi method and features in milling titanium alloys, the influences of cutting speed, feed rate and axial depth of cut on surface roughness are investigated with the analysis of variance （ANOVA） of the experimental data. The research results show that the construction speed of the modified PSO LS-SVM model is two orders of magnitude faster than that of back propagation（BP） model. Moreover, the prediction accuracy is about one order of magnitude higher than that of BP model. The modified PSO LS-SVM prediction model can explain the influences of cutting speed, feed rate and axial depth of cut on the surface roughness of titanium alloys. Either a higher cutting speed, a lower feed rate or a smaller axial depth of cut can lead to the decrease of surface roughness.     

An optimal microsatellite system for optical remote sensing data management

Inter-Satellite Link represents an innovative aspect in remote sensing missions, allowing the exchange of data between satellites of a constellation according to appropriate algorithms for the minimization of the delivery time of requested data. In a recent study, the feasibility of gaining a long period of Inter-Satellite Link with an acceptable level of Bit Error Rate has been demonstrated by using a Walker Constellation composed of 20 micro-satellites located on Sun-Synchronous Orbits. In this paper, an investigation into the performance of such a constellation through the implementation of an optimal process of target access and data exchange among satellites has been carried out, together with a sizing of the onboard telecommunication system. A process analysis has been executed through the modelling of weighted fitting functions, specific for an optical remote sensing system.     

Simple method for performance evaluation of multistage rockets

Multistage rockets are commonly employed to place spacecraft and satellites in their operational orbits. Performance evaluation of multistage rockets is aimed at defining the maximum payload mass at orbit injection, for specified structural, propulsive, and aerodynamic data of the launch vehicle. This work proposes a simple method for a fast performance evaluation of multistage rockets. The technique at hand is based on three steps: (i) the flight-path angle at each stage separation is guessed, (ii) the spacecraft velocity is maximized at the first and second stage separation, and (iii) for the last stage the thrust direction is obtained through the particle swarm optimization technique, in conjunction with the use of the Euler–Lagrange equations and the Pontryagin minimum principle. The coast duration at the second stage separation is optimized as well. The method at hand is extremely simple and easy-to-implement, but nevertheless it proves to be capable of yielding near-optimal ascending trajectories for a multistage launch vehicle with realistic structural, propulsive, and aerodynamic characteristics. The solutions found with the technique under consideration can be employed either for a rapid evaluation of the multistage rocket performance or as guesses for more refined optimization algorithms.     

环形扩压叶栅流动非定常控制方法的PIV研究

利用合成射流发生器对于一台环形扩压叶栅进行了流动主动控制的探索,发现适当的非定常激励方式可以使得环形叶栅的总压损失明显减小。同时利用二维粒子图像测速仪(ParticleImageVelocimetry,简称PIV)测量了扩压叶片绕流流场。获得了不同攻角下,在不同的激励频率和激励强度下,流场结构的变化。结果表明非定常激励可以使叶片绕流流场结构发生明显变化。在合适的非定常激励下,扩压叶片的叶背分离流动得到明显抑制,尾迹漩涡的强度和尾迹宽度均明显减小,流线分布比无非定常激励时更加平滑。实验结果能够与环形叶栅时均总压损失的变化相吻合。对于这一非定常控制方法的作用机理也进行了初步的分析。      

飞行器集群协同制导控制方法及应用研究

分析了目前多飞行器协同作战的发展现状与趋势,指出了多飞行器以编队形式进行协调与配合,可以有效提高突防概率与作战效能。针对飞行器集群协同制导控制技术,分析梳理了相关的技术难点。然后,分别对协同任务规划与动态目标分配方法和多飞行器编队协同控制方法、多约束条件下的分布式协同制导方法的国内外研究现状进行了介绍。最后对飞行器集群协同制导控制技术进行了总结,并对未来的发展方向进行了展望。