有限空间轴对称射流流场的数值模拟

本文在к－ε紊流模型下，采用罚有限元法对有限空间轴对称射流流场进行数值模拟。引用罚函数优化迎风格式和退化积分，建立有限元解法的数值矩阵，在不同截面上求得工，压力和紊流参数分布，计算结果与实验数据十分接近。本文研究结果可应用于火箭发动机的喷射设计和射流量论的研究。     

一种综合性能与寿命数据的Bayes-Bootstrap方法

对现代长寿命、高可靠产品进行可靠性评估,传统大样本寿命试验和统计推断方法存在很大困难,包括伪寿命数据方法在内的性能与寿命数据综合的可靠性评估方法也存在很多问题。提出了将性能可靠性建模与Bayes方法相结合的方式解决这一困难问题,其中对性能试验数据建立性能退化模型,并利用Bootstrap方法处理伪寿命数据导致的随机性误差和构造融合Bayes验前分布,然后利用Bayes验后分析进行可靠性统计推断。对随机斜率模型和长寿命卫星动量轮轴承组件润滑寿命的应用表明,提出的方法可以充分利用产品研制、使用过程中各种类型的信息,特别是性能试验信息,具有一定的适用性。     

跨大气层和空间区域飞行器的液体推进剂管理

根据大气层飞行环境与机动飞行特点,以及空间飞行环境与液体推进剂特点,分析了跨大气层和空间区域飞行器的保证重力场和失重状态下均无夹气液体输送、控制液体推进剂质心位移、剩余推进剂空间排放和重复使用等液体推进剂管理技术要求。阐述了相应的关键技术,如包括无夹气输送、液体质心位移控制、失重状态下的流体动力、参数确定和结构设计等管理模式确定,以及包括模型参数确定、模型、状态模拟和验证等的管理模式试验。     

《C++程序设计》课程教学方法探析

《C 程序设计》课程重点是培养学生掌握面向对象程序设计的基本思想和方法,难点是如何引导学生突破传统的思维方式,形成以面向对象的思维方式,分析问题、解决问题。本文从教学方法、教学手段的角度出发,谈谈在教学上的一些经验和体会,以提高C 课程教学质量和教学效果。     

A Geosynchronous Orbit Search Strategy

Since more than 10 years there is evidence that small-size space debris is accumulating in the geosynchronous orbit (GEO), probably as the result of breakups. Two break-ups have been reported in GEO. The 1978 break-up of an EKRAN 2 satellite, SSN 10365, was identified in 1992, and in 1992 a Titan 3C Transtage, SSN 3432, break-up produced at least twenty observable pieces. Subsequently several nations performed optical surveys of the GEO region in the form of independent observation campaigns. Such surveys suffer from the fact that the field of view of optical telescopes is small compared with the total area covered by the GEO ring. As a consequence only a small volume of the orbital element-magnitude-space is covered by each individual survey. Results from these surveys are thus affected by observational biases and therefore difficult to compare. This paper describes the development of a common search strategy to overcome these limitations. The strategy optimizes the sampling for objects in orbits similar to the orbits of the known GEO population but does not exclude the detection of objects with other orbital planes. A properly designed common search strategy clearly eases the comparison of results from different groups and the extrapolation from the sparse (biased) samples to the entire GEO environment.     

Tether Satellite System Collision Study

A study was performed to determine the probability of collision with resident space objects and untrackable debris for the tether component of the Tethered Satellite System (TSS) after it broke away from the Space Shuttle orbiter (mission STS-75) in February 1996. Both an analytical and a numerical approach were used in this study, and the results obtained with these two methods were found to be in good agreement. These results show that the deployed tether is expected to have been impacted by several particles 0.1mm or larger in size. The probability of collision with objects 10cm in size or larger was on the order of 10^–3 per month. Since the severed tether reentered within one month after deployment, the collision hazard to other objects while in orbit was small. The analytical methods used in this study are useful for tether collision evaluations in general.     

正态模型结构可靠性贝叶斯下限的计算方法

本文对正态模型结构可靠度的贝叶斯精确下限的评估公式提供一种新的计算方法。该方法能达到任意给定的精度。计算复杂度可由O(n~2)降为O(n)。程序结构简单,使用方便。     

缠绕复合材料喷管静力分析

本文对由一般曲线旋转得到的喷管进行了静力分析。文中讨论的喷管由缠绕复合材料构成,承受轴对称和非轴对称载荷作用。在采用有限元法分析时,通过Fourier转换将三维问题简化为二维求解。弹性矩阵中各参数采用合理假设只需由层状平面内三个弹性常数即可确定。文中给出缠绕复合材料喷管在内压和集中力作用下的位移分布算例,结果合理。本文推荐方法可供缠绕柔性喷管和其它类似结构分析时参考。     

刚性方程的二阶Gear方法的注记

构造了一个求解刚性方程的二阶差分格式,它是隐式的,并采用简单迭代求解,对于稳定系统,迭代收敛性条件与步长无关,而对不稳定系统,迭代收敛性条件对步长却有所限制,利用这一限制性条件去克服解刚性方程的二阶Gear方法时出现的“危险性”。     

软件测试的度量方法及其应用

软件测试是找出软件中的错误,它是保证软件质量的关键,软件测试的度量是对影响软件测试的属性所进行的定量测量.本文简述了应用软件测试度量技术时所应具有的基本知识,通过一个实例,介绍并讨论了一种实用的关于软件测试进度安排和软件错误数的度量方法.