KrF激光照射约束层靶驱动产生高速飞片研究

微小空间碎片的超高速撞击对航天器性能有重要影响。为了研究撞击损伤机制,在"天光一号"装置上开展了Kr F准分子激光照射约束层靶产生高速飞片的实验研究,利用成像速度干涉仪(Imaging-VISAR)对飞片自由面速度进行诊断。采用1.9 J准分子激光将10μm的Al飞片加速至12 km/s,且整个过程为准等熵加载。研究结果表明准等熵加载下激光能量转化为飞片动能的效率(达39.4%)比冲击加载要高得多,飞片速度也高于后者。     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

Parameter studies and evaluation principles of delamination damage in laminated composites

Delamination represents one of the most severe failure modes in composite laminates, especially when they are subjected to uniaxial compression loads. The evaluation of the delamination damage has always been an essential issue of composite laminates for durability and damage tolerance in engineering practice. Focusing on the most typical and representative elliptical delamination issue, an analytical model simultaneously considering the conservative buckling process and non-conservative delamination propagation process is implemented. Various computational cases considering different delamination depths, directions, aspect ratios, and areas are established, and the predicted results based on the analytical model are carefully compared. Effects of these geometrical delamination parameters on the buckling, delamination propagation, and failure behaviors of composite laminates are thoroughly analyzed, and innovative evaluation principles of the delamination damage have been concluded. It is found that the delamination area is the key factor that truly affecting the failure behaviors of delaminated composites, and the local / global buckling and failure loads show clear linearity with the delamination area, whilst the delamination depth and direction only have slight effects.     

真空出气对星用聚酰亚胺材料电导率的影响

卫星介质材料在真空环境下的出气有可能对材料本身的介电性能产生显著影响,增加长期服役卫星寿命末期的充放电风险。文章以卫星上常用的聚酰亚胺材料为对象,通过地面90Sr-90Y辐照源加速辐照试验研究了在材料真空出气后其表面充电平衡负电位的变化,并据此计算出材料电导率的变化规律。结果显示,在5 pA/cm2电子辐照强度下,聚酰亚胺样品的电导率随着出气量的增加而明显下降,在总质量损失达到0.5%时,电导率减小一半左右。初步分析了出气导致电导率下降的物理机制。研究结果对卫星寿命末期充放电防护设计有指导意义。     

论工学结合模式下的高职院校课程开发

目前,我国高职课程设置中严重的学科体系化倾向以及对学生职业能力培养的欠缺一直都是制约高职教育教学的顽疾。推行工学结合教育模式下的高职课程设置,不仅有利于改变以往“三段式”课程模式重理论轻实践的弊端,而且对于实现职业教育“以就业为导向,以能力为本位”的最终目标也,也具有重大意义。     

CET-4复合式听写试题内容效度历时研究(1997—2011)

本文以1997—2011年CET-4复合式听写为研究对象,从听力材料题材、体裁、篇幅、累计用时、平均语速等方面进行历时分析。结果表明15年来该部分呈现以下特点:1)以人文科学为主;2)以说明文和议论文为主,议论文有增加的趋势;3)材料篇幅集中在210-250个词;4)累计用时集中在5-6分钟;5)平均语速多数是每分钟约130个词。最后,本文总结了复合式听写对大学英语听力教学的启示,并尝试为该题型的命制提出一些建议。     

空间真空环境下密封电磁继电器的触点失效研究

密封电磁继电器有其固有的漏率,在应用于空间真空环境下由于气体泄漏使得其内部气体压力逐渐降低,导致继电器的触点在低气压环境下工作失效（负载切换时）。文章选择国产继电器样品对上述机理进行了试验验证,并对继电器内部气体压力与触点电弧失效的规律进行了研究。     

基于CAIV的导弹低成本保障性指标论证技术

利用CAIV技术分别建立反舰导弹的作战效能模型和总拥有费用模型,并以权衡空间为约束条件,以费用最低为目标,建立保障性指标权衡优化模型。该方法可以为导弹武器装备保障性指标论证工作提供必要的理论基础和技术支持。     

LSDW速度随激光参数和环境气体压强变化规律的实验研究

对LSDW速度随入射激光能量、激光聚焦角度和环境气体压强变化的规律进行了实验研究。研究发现,入射单脉冲激光能量越大,聚焦角度越小,环境气体压强越小,LSDW的传播速度越大。实验测量得到的LS-DW速度随入射激光能量、聚焦角度和环境气体压强的变化规律与一维理论公式中体现的规律完全一致。将相同条件下的实验数据与理论结果进行比较后发现,二者在定性上取得了很好的一致性,但在定量上有所差别,因此需要对现有一维理论公式进行修正,以便更深入地研究LSDW的传播演化规律和特性。     

航修系统企业对人才培养质量的评价分析——以长沙航空职业技术学院为案例

选取13家航修系统企业部分中层领导干部作为调查对象,以长沙航空职业技术学院人才培养质量为实证,从毕业生的思想品德、专业知识、业务能力、工作业绩等方面进行评价。研究发现：毕业生人才培养质量整体水平良好。其中,对思想政治素质、职业道德以及工作态度评价最高,其次是工作能力、行政职业能力和专业理论知识,而科研创新能力和外语能力有待加强。