曲率连续的非轴对称短舱气动型面参数化设计方法研究

为了进一步提高短舱内外流的气动性能,基于类别形状函数方法建立了曲率连续的非轴对称短舱气动型面参数化设计方法。主要思路是先设计关键截面型线,再设计纵向型线,最后通过纵向型线周向有序组合建立气动型面。为评价所建立的短舱气动型面设计方法的适用性,从曲率半径分布、主要工况下的流动特性和气动性能三个方面对所发展的方法和基于圆锥曲线的方法设计的超大涵道比(UHBPR)短舱进行了对比研究。结果表明：与基于圆锥曲线的方法设计的短舱相比,所建立的方法设计的短舱气动型面不存在轴向曲率半径波动。由于消除了曲率波动引起的短舱壁面附近局部过度加速形成的高速低压区,在马赫数为0.8的巡航条件下外罩壁面局部阻力降低了4.5%；在马赫数为0.82的飞行工况下,外罩壁面局部阻力降低了5.5%。进气道气动型面设计方法的改进,使得大攻角爬升条件下进气道总压恢复系数提高了0.41%,稳态周向总压畸变指数减小了8.82%。     

Peculiarities of the nighttime winter foF2 increase over Irkutsk

An analysis of properties and peculiarities of the nighttime winter foF2 increases (NWI) in the East Siberia is made on data of ionospheric station Irkutsk in the periods 1958–1992 and 2002–2009 and the empirical model of the F2 layer critical frequency under the geomagnetic quiet conditions deduced from these data (model Q-F2). It is revealed, that the NWI is the stable regularity of the quiet ionosphere over Irkutsk. The amplitude of the NWI (the difference between maximum and minimum foF2 values at night hours) is the greatest in December–January and nearly the same at low and middle solar activity. It is a peculiarity of the quiet ionosphere in the East Siberia. Maximum in night foF2 under quiet geomagnetic conditions is observed mainly after midnight (02-04 LT) and is shifted to predawn hours as solar activity increases. At low solar activity the quiet ionosphere at ∼02–04 LT shows the following properties: (a) the fluctuations of foF2 and hmF2 are in the reverse correlation but this dependence is weak; (b) very strong fluctuations of foF2 (|δfoF2| > 30%) occur seldom (∼4% of events) and almost all of them are positive; an example of very strong fluctuations of foF2 up to 60% can be an extreme increase in the foF2 on 19.12.2008; (c) the very strong enhancements of foF2 in the NWI maximum can be observed at the low geomagnetic activity, they occur more often during substorms but very seldom during geomagnetic storms. Possible reasons of these properties of NWI are discussed.     

An active debris removal parametric study for LEO environment remediation

Recent analyses on the instability of the orbital debris population in the low Earth orbit (LEO) region and the collision between Iridium 33 and Cosmos 2251 have reignited interest in using active debris removal (ADR) to remediate the environment. There are, however, monumental technical, resource, operational, legal, and political challenges in making economically viable ADR a reality. Before a consensus on the need for ADR can be reached, a careful analysis of its effectiveness must be conducted. The goal is to demonstrate the need and feasibility of using ADR to better preserve the future environment and to explore different operational options to maximize the benefit-to-cost ratio. This paper describes a new sensitivity study on using ADR to stabilize the future LEO debris environment. The NASA long-term orbital debris evolutionary model, LEGEND, is used to quantify the effects of several key parameters, including target selection criteria/constraints and the starting epoch of ADR implementation. Additional analyses on potential ADR targets among the existing satellites and the benefits of collision avoidance maneuvers are also included.     

无人机前开伞式降落过程动力学建模与仿真

文章分析了某型无人机降落伞回收阶段的动力学过程,对各工作阶段的无人机和降落伞的组合体进行了数学建模,使用Matlab软件中的Simulink组件搭建了无人机伞降过程的仿真模型,按照真实飞行和回收工况进行了计算,通过仿真结果与试验数据的比较,验证了模型的正确性.     

带滑移滞变系统的三阶段逐步收敛的识别方法

针对非线性带滑移滞变系统模型复杂，参数多，识别时收敛困难等问题，提出了一种三阶段逐步收敛的识别方法对Baber与Noori提出的带滑移滞变模型进行了参数识别。计算实例表明，该方法具有收敛速度快、且容易收敛的特点，对于参数较多、模型复杂的系统，是一种非常有效的参数识别方法。     

A novel approach to the attitude stabilization structure for ducted-fan operative aerial robots:Finding improvements for modeling error and strong external transient disturbance

This research concerns a novel attitude stabilization structure for a ducted-fan aerial robot to work against modeling error and strong external transient disturbance, and it focuses on two main control targets: modeling error compensation, and the improvement of disturbance resistance along the rolling channel. For the first research objective, we proposed an adaptive nominal controller with the reconfigurable control law design based on the estimation of the modeling error found in the closed-...     

使用解析目标分流策略的海洋卫星多学科优化

在海洋卫星总体设计阶段,为了提高卫星整体设计性能和效率,采用多学科设计优化（MDO）技术对其总体参数进行设计优化。考虑轨道、有效载荷、结构和电源四个学科的设计变量和约束条件,以卫星总质量最小为优化目标建立海洋卫星MDO模型;针对各学科优化问题属性设计高效的优化方案并采用解析目标分流（ATC）这一多级MDO策略来协调整个优化过程。优化后海洋卫星总质量相对海洋一号（HY-1）卫星下降17.6%,整个优化过程花费的时间也比采用单级All at once(AAO)策略减少85.7%。一方面表明所建立的海洋卫星MDO模型的合理有效性,另一方面表明ATC策略结合学科定制优化方案的求解技术的有效性。     

A study of the material density distribution of space debris

Material density is an important, yet often overlooked, property of orbital debris particles. Many models simply use a typical density to represent all breakup fragments. While adequate for modeling average characteristics in some applications, a single value material density may not be sufficient for reliable impact damage assessments. In an attempt to improve the next-generation NASA Orbital Debris Engineering Model, a study on the material density distribution of the breakup fragments has been conducted and summarized in this paper.     

月球精确定点软着陆轨道设计及初始点选取

研究了一种应用参数化控制求解月球探测器精确定点软着陆最优控制问题的方法。 首 先用约束变换技术将不等式约束进行了近似处理,而后利用若干个分段的常数去逼近最优解 ,再根据强化技术通过时间轴上的变换,将每一段参数的持续时间转变为一组新的参数,于 是最优控制问题被转化为一系列参数优化问题。最后应用经典的参数优化方法即可求得最优 控制函数的一个近似解,通过增加参数个数,重复优化得到逼近连续最优解的参数化解。同 时在优化过程中考虑了制动初始点的选取对结果的影响。仿真结果表明了所提设计方法是简 单、有效的。〖JP〗