数字多用表自动检定校准系统

本文介绍了一种数字多用表的自动检定校准系统的构成及软件设计 ,并对系统软件的设计方法 ,主要功能及主要特色进行了讨论。     

民用飞机后机身结构静力试验方案设计

针对某民用飞机后机身结构特点和受载形式,设计了相应的静力试验方案。该方案合理模拟了后机身结构的支持和边界条件,同时对后机身严重载荷情况进行分析处理,实现了飞行载荷和惯性载荷在后机身结构上的施加,顺利完成了大部段复杂结构的静强度试验。试验结果表明,后机身结构能够承受极限载荷,其刚度和强度满足设计要求。     

Dynamic parametric modeling-based model updating strategy of aeroengine casings

For accurate Finite Element (FE) modeling for the structural dynamics of aeroengine casings, Parametric Modeling-based Model Updating Strategy (PM-MUS) is proposed based on efficient FE parametric modeling and model updating techniques regarding uncorrelated/correlated mode shapes. Casings structure is parametrically modeled by simplifying initial structural FE model and equivalently simulating mechanical characteristics. Uncorrelated modes between FE model and experiment are reasonably handled by adopting an objective function to recognize correct correlated modes pairs. The parametrized FE model is updated to effectively describe structural dynamic characteristics in respect of testing data. The model updating technology is firstly validated by the detailed FE model updating of one fixed–fixed beam structure in light of correlated/uncorrelated mode shapes and measured mode data. The PM-MUS is applied to the FE parametrized model updating of an aeroengine stator system (casings) which is constructed by the proposed parametric modeling approach. As revealed in this study, (A) the updated models by the proposed updating strategy and dynamic test data is accurate, and (B) the uncorrelated modes like close modes can be effectively handled and precisely identify the FE model mode associated the corresponding experimental mode, and (C) parametric modeling can enhance the dynamic modeling updating of complex structure in the accuracy of mode matching. The efforts of this study provide an efficient dynamic model updating strategy (PM-MUS) for aeroengine casings by parametric modeling and experimental test data regarding uncorrelated modes.     

TFM imaging of aeroengine casing ring forgings with curved surfaces using acoustic field threshold segmentation and vector coherence factor

The aeroengine casing ring forgings have complex cross-section shapes, when the conventional ultrasonic or phased array is applied to detect such curved surfaces, the inspection images always have low resolution and even artifacts due to the distortion of the wave beam. In this article, taking a type of aeroengine casing ring forging as an example, the Total Focusing Method (TFM) algorithms for curved surfaces are investigated. First, the Acoustic Field Threshold Segmentation (AFTS) algorithm is proposed to reduce background noise and data calculation. Furthermore, the Vector Coherence Factor (VCF) is adopted to improve the lateral resolution of the TFM imaging. Finally, a series of 0.8 mm diameter Side-Drilled Holes (SDHs) are machined below convex and concave surfaces of the specimen. The quantitative comparison of the detection images using the conventional TFM, AFTS-TFM, VCF-TFM, and AFTS-VCF-TFM is implemented in terms of data volume, imaging Signal-to-Noise Ratio (SNR), and defect echo width. The results show that compared with conventional TFM, the data volume of AFTS-VCF-TFM algorithm for convex and concave is decreased by 32.39% and 73.40%, respectively. Moreover, the average SNR of the AFTS-VCF-TFM is gained up to 40.0 dB, while the average 6 dB-drop echo width of defects is reduced to 0.74 mm.     

多随机变量的桁架结构系统的可靠性分析及优化设计

针对桁架结构系统，采用随机有限元法（SFEM）计算结构系统的响应量，考虑内力重新分配，建立失效模式的安全余量方程，用验算点法计算失效模式安全余量的可靠性指标，用改进的分枝限界法，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，寻找主要失效模式，通过对主要失效模式方程线性化研究，计算失效模式安全余量之间的相关系数，最后用PNET法计算出结构系统的失效概率，同时给出多随机变量的结构系统可靠度的敏度表达式，采用最佳矢量法，求解了大型桁架结构系统基于可靠性指标约束下的最小重量的优化设计问题，最后，给出了实际算例，计算结果表明；采用随机有限元法能更好地考虑结构系统的多个随机变量对系统可靠性产生的影响；所采用的可靠性分析方法和优化方法是有效的。     

通用化测控应答机的设计

文章介绍了测控应答机的现状及研究背景，并对研制中的困难及今后的发展需求进行了分析，提出了通用化测控应答机的设计方案及关键技术，可供通用化测控应答机设计和批量生产参考。     

某型飞机球形灭火瓶设计改进

本文对某型飞机球形灭火瓶失效情况进行统计分析,初步确定了故障原因。通过环境适应性摸底试验进一步验证分析,进行了设计改进。改进后的灭火瓶满足使用要求。     

U管质量流量计的工作原理与设计

介绍了１种自行研制的Ｕ管质量流量计的工作原理及其设计方案。     

在企业深化改革中开创社会化计量测试新局面

通过大量的事实,阐述了在企业不断深化改革过程中,开创社会化计量测试的基础,条件及基本做法。     

我国通信卫星用的镉镍蓄电池

文中论述了镉镍单体电池中陶瓷金属封接技术、影响电池比能量的因素、隔膜的选择和镉电极对电池性能的影响。在此基础上又进一步阐述了组合电池的设计,框架式结构的产生、碳纤维材料的使用和充电控制技术。