关于加大产业结构调整力度的思考

本文从我国产业结构调整的现状及存在的问题出发，针对一般加工产业生产能力过大，高水平的加工能力不足这一突出问题进行了原因分析，在此基础上，就我国加速优化产业结构的客观基础和可能，提出了关于加大产业结构调整力度的七点思考建议。     

Spacecraft optimal rendezvous controller design using simulated annealing

A new global approach for rendezvous Linear Quadratic controller design is presented in this paper. Instead of solving the algebraic Riccati equation, a continuous simulated annealing (SA) algorithm is used to design rendezvous LQ controller. Optimization of one automatic rendezvous controller with 18 design parameters is illustrated. The results show that the SA algorithm can locate the global solution effectively and robust, besides a great number of global solutions have been obtained by the SA. The SA has demonstrated better performance than other optimization algorithms such as floating-coded Genetic Algorithm, Simplex method and Powell algorithm.     

超临界层流翼型优化设计策略

针对超临界层流翼型设计问题,提出一种两轮优化策略。采用γ-Reθt转捩模型耦合剪切应力输运(SST)模式的湍流模型对翼型边界层转捩进行预测。翼型几何参数化建模采用形状分类函数转换(CST)方法,设计变量为描述翼型几何特征的参数。第1轮优化的目的是尽量提高层流区域的比例,气动分析模型为基于Kriging模型的代理模型,优化算法为遗传算法,通过优化获得满足约束要求的层流翼型。第2轮优化目的是对第1轮优化获得的翼型进行微调,进一步提高翼型的升阻比,气动分析直接采用CFD程序,优化算法采用基于梯度的优化算法。算例表明,应用本文提出的两轮优化策略,可将超临界翼型NASA SC(2)0412优化设计成超临界层流翼型,翼型的上下表面层流区比例分别达到了55.5%和47.0%,升阻比提高了38.1%。     

Applications of structural efficiency assessment method on structural-mechanical characteristics integrated design in aero-engines

In the design process of advanced aero-engines, it is necessary to carry out an effective analysis method between structural features and mechanical characteristics for a better structural optimization. Based on the structural composition and functions of aero-engines, the concept and contents of structural efficiency can reflect the relation between structural features and mechanical characteristics. In order to achieve the integrated design of structural and mechanical characteristics, one quantitative analysis method called Structural Efficiency Assessment Method (SEAM) was put forward. The structural efficiency coefficient was obtained by synthesizing the parameters to quantitatively evaluate the aero-engine structure design level. Parameterization method to evaluate structural design quality was realized. After analyzing the structural features of an actual dual-rotor system in typical high bypass ratio turbofan engines, the mechanical characteristics and structural efficiency coefficient were calculated. Structural efficiency coefficient of high-pressure rotor (0.43) is higher than that of low-pressure rotor (0.29), which directly shows the performance of the former is better, there is room for improvement in structural design of the low-pressure rotor. Thus the direction of structural optimization was pointed out. The applications of SEAM shows that the method is operational and effective in the evaluation and improvement of structural design.     

不同目标函数参数优化的FOPI直流调速控制

为了提高直流调速系统性能,将直流调速系统速度控制器设计为分数阶PI(FOPI),并与整数阶PI控制特性进行比较。在确定FOPI/PI控制器参数时,根据不同目标函数用粒子群算法对控制器参数进行了优化,并分析了不同目标函数所确定的控制器参数对调速系统性能的影响。仿真表明:FOPI有较好的控制性能。在设计控制器参数时,可根据性能要求选用不同的目标函数优化设计控制器参数。     

低轨卫星月影事件预报优化

针对卫星月影问题,提出了一种低轨卫星优化的月影预报策略,可以有效提高目前低轨卫星在轨管理时对月影事件预报的效率.结合仿真对产生月影事件的太阳、地球、月球的三体关系进行了分析,首先给出了月影产生的解析分析方法,并通过对一个三维月影影响模型的分析,得到了月影影响区间的判定要素——月影临界角;然后进一步通过对月影临界角的分析,提出了基于太阳与白道面的位置关系和月影临界角对低轨卫星月影事件的优化预报方法;最后基于大量的随机低轨卫星场景对本方法的正确性进行了验证.研究结果表明,此方法能够较大地提高月影预报效率,可以将月影预报频率从每月1次降低到每年2次,从而简化了低轨卫星在轨运行管理的任务复杂度,为卫星的在轨可靠运行提供支持.     

利用条件平差实现导航星座自主守时方法

针对导航星座自主导航系统的重要组成部分———自主守时系统,提出了一种简便易行的新算法:根据星间测距数据,采用条件平差进行自主守时计算;并且介绍了此方法基本原理和实现思路。自主守时仿真计算表明,此方法守时同步误差不累积,距离测量误差0.1m时,时间同步误差均方根小于0.4m。     

Hypersonic reentry trajectory planning by using hybrid fractional-order particle swarm optimization and gravitational search algorithm

This paper proposes a novel hybrid algorithm called Fractional-order Particle Swarm optimization Gravitational Search Algorithm (FPSOGSA) and applies it to the trajectory planning of the hypersonic lifting reentry flight vehicles. The proposed method is used to calculate the control profiles to achieve the two objectives, namely a smoother trajectory and enforcement of the path constraints with terminal accuracy. The smoothness of the trajectory is achieved by scheduling the bank angle with the aid of a modified scheme known as a Quasi-Equilibrium Glide (QEG) scheme. The aerodynamic load factor and the dynamic pressure path constraints are enforced by further planning of the bank angle with the help of a constraint enforcement scheme. The maximum heating rate path constraint is enforced through the angle of attack parameterization. The Common Aero Vehicle (CAV) flight vehicle is used for the simulation purpose to test and compare the proposed method with that of the standard Particle Swarm Optimization (PSO) method and the standard Gravitational Search Algorithm (GSA). The simulation results confirm the efficiency of the proposed FPSOGSA method over the standard PSO and the GSA methods by showing its better convergence and computation efficiency.     

一种实用的运输类飞机机翼/发动机短舱一体化优化设计方法

发展了一套基于遗传算法优化/Navier-Stokes方程分析的运输类飞机机翼/发动机短舱一体化设计方法,提出了一系列保证该方法工程实用性的解决方案,其中包括设计变量模块化、局部优化全机分析、超临界压力分布约束条件等。通过采用适当的计算网格、并行算法及数值方法,使得基于遗传算法优化/Navier-Stakes方程分析设计方法的运算时间在工程上能够接受。运用该设计方法对下单翼运输类飞机机翼/发动机短舱一体化设计开展了单点优化和两点优化,结合二者结果对比验证了该方法的有效性和工程实用性。单点优化得到的机翼压力分布呈现无激波特点,阻力系数随马赫数变化比较剧烈;两点优化得到的机翼压力分布为弱激波形态,阻力随马赫数变化比较缓和,所设计的机翼具有更好的鲁棒性和工程实用性。     

基于模拟退火算法与响应面模型的三维气动优化设计方法

提出了一套适用于高耗时三维气动设计问题的优化设计体系.其主要思想是采用改进拉丁超立方体试验设计选取样本点,应用自行开发的三维粘性流场求解程序进行流场计算建立数据库,采用二次响应面方法建立近似模型,再应用高效模拟退火算法进行全局寻优.以NASA rotor57为对象,在详细进行流场计算基础上采用所提出的优化体系对其进行了三维积叠优化设计.在对流量、效率加以严格约束的条件下,总压比可提高1.8%,对流场结构进行了分析.优化结果表明本优化方法省时,适于三维气动设计的特点.