缓磨时工件烧伤过程的计算机仿真研究

在关于缓磨时的磨削热、接触弧区换热过程以及工件表层非稳态温度场的深入研究的基础上构造了一个可用于计算工件表层温度场畸变历程的数学模型，并据此完成了缓磨时工件烧伤过程的计算机仿真研究。仿真结果与缓磨时的实际烧伤过程吻合良好。本文率先阐明了缓磨烧伤的热机理，并证实了缓磨烧伤是一典型的渐变过程，它有明显的前兆特征，因而是可以被预报和控制的。此项创造性工作可以被看作是对磨削基础理论的一项重要贡献。     

A combined turbulent combustion model in studying a lean flameout process

A modification of the Zimont turbulent combustion model is presented; the modification makes it possible to describe processes in diffusion and homogeneous flame fronts as well as to take into account the influence of different factors that cause flame destabilization. The model is based on the equation for a reaction completeness extent (completeness of combustion). The model realization to simulate the premixed combustion is described and the modification of the turbulent combustion model is applied to simulate a process of flameout downstream of the flameholder.     

复合铣整体叶盘通道加工工艺规划分析

首先对开式整体叶盘通道几何特征进行分析,在宽度和深度上对通道加工空间进行计算,从轴向和径向进行切削加工性分析;通过偏置面求解及其延伸面求解,进而确定可加工区域;在对比分析各种铣削方法基础上,优选复合铣削数控刀具,明确通道复合铣加工方法以及流程,为后续开式整体叶盘通道加工工艺优化打下基础。     

基于虚拟仪器的切削力监控技术研究

研制了一种基于虚拟仪器界面、供现场使用的高精度、高效率的金属切削过程监控系统。研究中采用回归分析、叠加原理及抛物线插值的方法建立切削力模型 ,并基于该模型进行参数估计来提取切削状态特征 ,进而监控整个切削过程     

异种材料组合件精密组装及加工技术研究

文章介绍了某异种材料组合件的结构特点及工艺特点。通过对产品加工难点的分析,确定合理的装配及后加工工艺流程,设计了装配工装及后加工工装,加工出的产品形位精度最终满足设计指标。     

铝合金T型材拉弯成形的有限元模拟

针对目前拉弯成形中的问题,采用有限元模拟的方法,对带下陷拉弯过程进行计算机仿真,得到优化后的工艺参数,避免了盲目的试拉,提高了加工效率,降低了拉弯成本,积累了带下陷拉弯成形的经验,提高了公司拉弯工艺水平。     

Modelling ignition probability with pairwise mixing-reaction model for flame particle tracking

Reduced order models for ignition analysis can offer insights into ignition processes and facilitate the combustor optimization. In this study, a Pairwise Mixing-Reaction (PMR) model is formulated to model the interaction between the flame particle and the surrounding cell mixture during Lagrangian flame particle tracking. Specifically, the model accounts for the two-way coupling of mass and energy between the flame particle and the surrounding shell layer by modelling the corresponding turbulent mixing, chemical reaction and evaporation process if present. The state of a flame particle, e.g., burnt, hot gas or extinguished, is determined based on particle temperature. This model can properly describe the ignition process with a spark kernel being initiated in a nonflammable region, which is of practical importance in certain turbine engines and has not been rigorously accounted for by the existing models based on the estimation of local Karlovitz number. The model is integrated into an ignition probability analysis platform and is demonstrated for a methane/air bluff-body flame with the flow and fuel/air mixing characteristics being extracted from a non-reacting simulation. The results show that for the spark location being at the extreme fuel-lean outer shear layer of the recirculation zone, PMR can yield ignition events with a significant number of active flame particles. The mechanisms for the survival of the initial flame particles and the entrainment of the survived flame particles into the recirculation zone are analyzed. The results also show that the ignition probability map from PMR agrees well with the experimental observation: a high ignition probability in the shear layer of the recirculation zone near the mean stoichiometric surface, and low ignition probabilities inside the recirculation zone and the top stagnation region of the recirculation zone. The parametric study shows that the predicted shape of the ignition progress factor and ignition probability is in general insensitive to the model parameters and the model is adequate for quantifying the regions with high ignition probabilities.     

Sliding mode control design for oblique wing aircraft in wing skewing process

When the wing of Oblique Wing Aircraft (OWA) is skewed, the center of gravity, inertia and aerodynamic characteristics of the aircraft all significantly change, causing an undesirable flight dynamic response, affecting the flying qualities, and even endangering the flight safety. In this study, the dynamic response of an OWA in the wing skewing process is simulated, showing that the three-axis movements of the OWA are highly coupled and present nonlinear characteristics during the wing skewing. As the roll control efficiency of the aileron decreases due to the shortened control arm in an oblique configuration, the all-moving horizontal tail is used for additional roll and the control allocation is performed based on minimum control energy. Given the properties of pitch-roll-yaw coupling and control input and state coupling, and the difficulty of establishing an accurate aerodynamic model in the wing skewing process due to unsteady aerodynamic force, a multi-loop sliding mode controller is formulated by the time-scale separation method. The closed-loop simulation results show that the asymmetric aerodynamics can be balanced and that the velocity and altitude of the aircraft maintain stable, which means that a smooth transition is obtained during the OWA’s wing skewing.     

三维五向编织复合材料的冲击压缩特性及破坏机制

利用分离式霍普金森压杆(split Hopkinson pressure bar,SHPB)实验系统和高速摄像技术对三维五向碳/环氧编织复合材料的动态压缩特性进行研究。通过对编织角为22.3°的试样分别进行沿纵向和横向方向的冲击压缩实验,得到材料在200~1200 s^-1应变率范围内的应力应变曲线,并结合高速摄像记录的动态压缩过程,对不同应变率下材料在高速变形下的渐进破坏规律进行分析。同时,综合试样的宏观破坏特征和微观断口形貌特征,进一步分析材料的破坏模式及破坏机理。结果表明:随着应变率的增加,材料在纵向和横向均具有一定的应变率强化效应,在横向方向的应变率强化效应更为显著;不同加载方向下材料的渐进破坏过程、应力应变曲线特征以及破坏方式均具有明显差异,且随着应变率的增加而发生改变。     

二氧化碳（CO2）气硬树脂砂用促硬剂的研究

本文介绍了一种对碱性甲阶酚醛树脂有促硬作用的盐,在树脂中加入强碱和该促硬剂后,形成了稳定液态粘结剂,吹ＣＯ２气体硬化后可得到较高的即时抗压强度和２４小时抗压终强度。