基于CDMA容量的星载多波束天线赋形分析

建立LEO-CDMA通信系统容量分析模型,给出系统容量的计算方法,从系统容量的角度出发对比分析运用遗传算法赋形得到的波束增益模型和基于二阶锥形模型的波束增益模型的系统容量。结果表明,基于二阶锥形增益模型的系统容量约为基于赋形增益模型系统容量的两倍。分析结果为多波束接收天线的系统设计及赋形方案设计提供了理论依据。     

发展设计性实验 培养学生综合能力

本文阐述在实验教学中,发展设计性实验可提高学生独立分析问题与解决工程实际问题的综合能力,同时也为学生后续的毕业设计,顺利走上工作岗位奠定坚实的基础。     

动力学缩聚模型修正的矩阵逼近法

为避免结构动力学分析中修正有限元模型时的大型稠密矩阵运算,研究了一种用基于矩阵逼近的有限元缩聚模型修正法。根据有限元模型的缩聚和修正,给出了试验模态的扩阶、物理模态到广义模态的映射和矩阵逼近,并讨论了结构存在重频时模态的相关性。算例表明,该法可行。     

固体火箭发动机燃烧室冷态突扩气固多相流动的数值模拟

基于欧拉-欧拉双流体方法,建立固体火箭发动机燃烧室轴对称突扩气固多相流动的统一二阶矩两相湍流模型,采用k-ε双方程模拟气相湍流流动和颗粒相湍流雷诺应力kpg方程描述大尺度颗粒湍流运动、小尺度颗粒各向异性弥散特性以及气固相间作用。数值模拟了突扩流动中的颗粒轴向、径向平均速度和脉动速度以及颗粒-气相脉动速度关联轴向分量的分布特性,计算结果与试验吻合较好。研究结果表明:颗粒轴向速度脉动大于径向速度脉动,轴向平均速度梯度影响脉动速度峰值的发生位置和大小;两相脉动速度关联轴向分量大约是径向分量的2倍。     

示波器输入电容对上限截止频率测量的影响

单管放大电路是模拟电路中的一个经典实验。通过这个实验,学生可以更好地掌握静态工作点的调整和测试方法,并通过测量放大电路的主要性能指标,体会静态工作点对动态特性的影响。实验电路的上限截止频率仿真值和实测值存在较大差异,本文针对这个问题进行了详细的分析,指出示波器的输入电容是引起差异的主要原因,并进一步讨论了可有的改进测试方法。     

Integrity of sulfur concrete subjected to simulated lunar temperature cycles

In view of potential application as a construction material on the lunar surface the mechanical integrity of sulfur concrete was evaluated after being subjected to simulated temperature cycles. Here, small cubes of sulfur concrete were repeatedly cycled between room (20 °C) and liquid nitrogen (−191 °C) temperatures after which they, and non-cycled cubes, were evaluated by compression testing. The compression strength of the non-cycled samples averaged ∼35 MPa (5076 psi) before failing whereas the cycled samples fractured at about 7 MPa (1015 psi). Microscopic examination of the fracture surfaces from the cycled samples showed clear de-bonding of the sulfur from the aggregate whereas it was seen adhering in those non-cycled. Based on a simple analysis it was concluded that the large strength discrepancy between cycled and non-cycled samples is due to differences between the coefficients of thermal expansion of the materials constituting the concrete.     

Singularity analysis for single gimbal control moment gyroscope system using space expansion method

Control Moment Gyroscope (CMG) is an effective candidate for agile satellites and large spacecraft attitude control because of its powerful torque amplification capability. The most serious situation, however, in using CMG is the inherent geometric singularity problem, where there’s no torque output along a particular direction. Space expansion method has been proposed in this work for the singularity analysis. Based on inverse mapping transformation, an expanded Jacobian matrix which is a full rank square matrix is obtained. The singular angle sets of the 3-parallel cluster and pyramid cluster are distinguished using space expansion method. An effective hybrid steering strategy, able to deal with the elliptic singularity, is further proposed. Simulation results demonstrate the excellent performance of the proposed steering logic compared to the generalized singular robust logic and pseudo inverse logic in terms of energy consumption and torque error.     

定向破坏复合材料层合壳体结构铺层的分析与设计

以复合材料层合板为基本材料设计了一种结构新颖的定向破坏复合材料层合壳体结构,在导弹与

该壳体结构的初始接触区域预制缺陷区,导弹发射时以四瓣形式开裂,大幅度提高了导弹的发射效率。利用ANSYS

有限元模拟分析软件,通过强度分析确定了最佳铺层设计方案,单层板厚度为0.2 mm,采用基体本身加强预

置缺陷区的[0°/90°/ ±45°]2S 铺层方式。该种铺层方式的爆破载荷为0.21 MPa,最小顶破载荷为1 kN,完全能够

满足其在工作环境下既能承受一定的压力不漏气又能在较小的顶破载荷下自行破裂的设计要求。

     

基于 VxWorks 的大容量 SATA 电子盘驱动实现

本文讲述了大容量 SATA 电子盘在 VxWorks 操作系统中的驱动设计过程.介绍了硬件系统组成,描述了 VxWorks 中 SATA 电子盘设备的驱动流程,MPC8377 CPU 自带 SATA 控制器的配置和大容量电子盘的配置,以及文件系统的建立过程     

机场近距平行跑道一起一降模式下的容量计算

通过对传统跑道容量模型的修正并结合相应的飞行程序，得出了近距平行跑道在一起一降运行模式下起飞和到达容量独立计算的数学模型，并且用中国上海浦东机场运行数据进行了验证，表明容量模型具有较好的实用性，从而在实际应用中方便了近距平行跑道容量的计算，同睁也提高了近距平行跑道的利用率。