论石油企业QHSE管理体系的建立

根据我国石油企业的实际 ,探讨了石油企业建立QHSE管理体系的方法与措施。     

基于FW-H方程的旋翼气动声学计算研究

由流体力学N S方程导出的非齐次波动方程———FfowcsWilliams Hawkings方程(简称FW H方程),可以精确地描述在静止流体中运动的物体与流体相互作用的发声问题。以FW H方程为理论模型,将旋翼桨叶运动发声问题等效为包含桨叶的任意运动控制面(声源面)的声辐射问题,并在旋翼绕流Euler方程数值模拟的基础上,在时域内计算了悬停旋翼和前飞旋翼的声场。应用于UH 1H和AH 1/OLS两种旋翼模型的气动声学计算表明:计算结果与噪声实验值符合良好;所研制的程序不仅能够较准确地计算单极子噪声和偶极子噪声,而且具有较强的跨音速四极子噪声预测能力。     

多体运动理论与齿轮测量中心的几何误差建模

本文阐述了多体系统的拓扑结构和低序体阵列,其特征矩阵的基本概念和构建方法,分析了多体系统误差运动的基本规律,结合891E型齿轮测量中心研究了根据特征矩阵得到其空间几何误差的算法,为齿轮测量中心精度分析和几何误差提供了一种理想的建模方法.     

Deep Impact: Working Properties for the Target Nucleus – Comet 9P/Tempel 1

In 1998, Comet 9P/Tempel 1 was chosen as the target of the Deep Impact mission (A’Hearn, M. F., Belton, M. J. S., and Delamere, A., Space Sci. Rev., 2005) even though very little was known about its physical properties. Efforts were immediately begun to improve this situation by the Deep Impact Science Team leading to the founding of a worldwide observing campaign (Meech et al., Space Sci. Rev., 2005a). This campaign has already produced a great deal of information on the global properties of the comet’s nucleus (summarized in Table I) that is vital to the planning and the assessment of the chances of success at the impact and encounter. Since the mission was begun the successful encounters of the Deep Space 1 spacecraft at Comet 19P/Borrelly and the Stardust spacecraft at Comet 81P/Wild 2 have occurred yielding new information on the state of the nuclei of these two comets. This information, together with earlier results on the nucleus of comet 1P/Halley from the European Space Agency’s Giotto, the Soviet Vega mission, and various ground-based observational and theoretical studies, is used as a basis for conjectures on the morphological, geological, mechanical, and compositional properties of the surface and subsurface that Deep Impact may find at 9P/Tempel 1. We adopt the following working values (circa December 2004) for the nucleus parameters of prime importance to Deep Impact as follows: mean effective radius = 3.25± 0.2 km, shape – irregular triaxial ellipsoid with a/b = 3.2± 0.4 and overall dimensions of ∼14.4 × 4.4 × 4.4 km, principal axis rotation with period = 41.85± 0.1 hr, pole directions (RA, Dec, J2000) = 46± 10, 73± 10 deg (Pole 1) or 287± 14, 16.5± 10 deg (Pole 2) (the two poles are photometrically, but not geometrically, equivalent), Kron-Cousins (V-R) color = 0.56± 0.02, V-band geometric albedo = 0.04± 0.01, R-band geometric albedo = 0.05± 0.01, R-band H(1,1,0) = 14.441± 0.067, and mass ∼7×10¹³ kg assuming a bulk density of 500 kg m⁻³. As these are working values, {i.e.}, based on preliminary analyses, it is expected that adjustments to their values may be made before encounter as improved estimates become available through further analysis of the large database being made available by the Deep Impact observing campaign. Given the parameters listed above the impact will occur in an environment where the local gravity is estimated at 0.027–0.04 cm s⁻² and the escape velocity between 1.4 and 2 m s⁻¹. For both of the rotation poles found here, the Deep Impact spacecraft on approach to encounter will find the rotation axis close to the plane of the sky (aspect angles 82.2 and 69.7 deg. for pole 1 and 2, respectively). However, until the rotation period estimate is substantially improved, it will remain uncertain whether the impactor will collide with the broadside or the ends of the nucleus.     

卫星故障诊断的最优奇偶向量法

 提供一种卫星故障诊断方法以提高 GPS导航的完整性。该方法利用最优奇偶向量来检测和诊断卫星故障以提高卫星故障诊断的准确性。仿真结果显示,在故障幅值较小的情况下最优奇偶向量方法相比广义似然比方法可以提高故障的正确检测率和正确诊断率。该方法还可以缩短检测斜坡型故障的时间,从而提高了系统的可靠性。     

直升机燃油系统地面模拟试验中试验台转角与油面角的关系

为了在直升机燃油系统地面模拟试验中准确地模拟油面角，本文介绍了试验台转角与油面角的关系，并给出了转换结果，同时，提出了一种用油箱内增压来模拟过载的设想，使在模拟试验时，油泵供油更趋真实，通过简化计算，给出了确定气压力的方法和判断依据。     

热防护系统高温纤维隔热毡传热及有效热导率分析

针对重复使用运载器热防护系统纤维隔热毡内部导热和辐射的耦合换热问题进行了分析,应用有限差分法建立了纤维隔热毡的数值分析模型.通过数值求解传热方程,计算了稳态的有效热导率.计算结果表明辐射和气体传导是纤维隔热毡内的主要传热方式,辐射作用随压力和试样密度的增加而降低,在试样温度高的一侧辐射是主要的传热方式,而在温度低的一侧气体传导为主要的传热方式;试样的有效热导率随纤维的平均直径、压力和温差的增加而增加,随试样密度的增加而降低.本文的计算结果与文献中的实验结果吻合较好,可以为纤维隔热毡及热防护系统的优化设计提供理论参考.     

应用逆系统方法设计空空导弹控制器

对非线性控制的逆系统方法原理进行了介绍，将该方法应用于空空导弹制导设计中，设计了导弹质心运动动力学系统的控制器，该控制器通过对弹道坐标系下导弹的纵向过载和法向过载实施控制，可使导弹在控制系统中的速度、偏航角和俯仰角输出信息渐近跟踪制导指令，以实现空空导弹对攻击目标的跟踪。     

芳纶纤维／环氧复合材料界面超声连续改性处理

运用超声技术在芳纶/环氧复合材料制备过程中对其界面进行改性处理,分析了超声处理过程中纤维与树脂之间浸润性的变化趋势以及超声作用对复合材料界面性能和力学性能的影响。结果表明:超声是通过改善纤维与树脂之间的浸润性,提高复合材料的界面性能及力学性能。     

基于BP人工神经网络的GPS／SINS组合导航算法

基于扩展Kalman滤波的GPS／SINS组合导航算法，需要对原始的非线性连续系统模型进行线性化和离散化处理，要求系统噪声和测量噪声为零均值的高斯白噪声，且易于出现滤波器发散。BP人工神经网络毋需对所求解的问题建模，能够很好地逼近系统非线性特性，获得较高精度的导航定位信息；还具有计算过程稳定，不涉及矩阵求逆，不需要迭代逼近，以及容易实现并行处理等优点。本文设计适用于GPS／SINS组合导航系统的BP网络模型，并在标准的BP算法基础上，采用共轭梯度法改进网络训练速度及精度。最后，通过仿真算例说明BP网络方法用于GPS／SINS组合导航计算的可行性。