基于可用度确定MSI维修间隔期的研究

可用度综合反映了系统可靠性和维修性水平,本文按最大可用度的原则确定民用飞机系统重要维修项的维修间隔期,并进一步讨论了该方法的适用范围,提供了可用于工程实践的方法。     

Adaptive path planning for unmanned aerial vehicles based on bi-level programming and variable planning time interval

This paper presents an adaptive path planner for unmanned aerial vehicles (UAVs) to adapt a real-time path search procedure to variations and fluctuations of UAVs’ relevant performances, with respect to sensory capability, maneuverability, and flight velocity limit. On the basis of a novel adaptability-involved problem statement, bi-level programming (BLP) and variable planning step techniques are introduced to model the necessary path planning components and then an adaptive path planner is developed for the purpose of adaptation and optimization. Additionally, both probabilistic-risk-based obstacle avoidance and performance limits are described as path search constraints to guarantee path safety and navigability. A discrete-search-based path planning solution, embedded with four optimization strategies, is especially designed for the planner to efficiently generate optimal flight paths in complex operational spaces, within which different surface-to-air missiles (SAMs) are deployed. Simulation results in challenging and stochastic scenarios firstly demonstrate the effectiveness and efficiency of the proposed planner, and then verify its great adaptability and relative stability when planning optimal paths for a UAV with changing or fluctuating performances.     

基于混沌序列加权抽样和排序变换的图像置乱

为增强网络中传输的数字图像信息的安全性,对一类典型的基于混沌排序图像置乱算法——Ye算法进行了研究,给出应用间隔抽样混沌序列置乱图像可以提高混沌排序置乱算法置乱度这一性质,并依据近似熵理论给出其提升的依据.为增加图像置乱算法的密钥空间,结合Shannon加权保密思想,设计了基于加权抽样混沌序列排序图像置乱算法.结果表明,该方法密钥空间大,置乱强度高,抗重构攻击.     

航空装备备件需求量的概率区间计算方法

科学合理地解决备件配置问题一直为人们所瞩目,备件配置数量的多少不仅影响装备的维修甚至影响装备的战备完好率。计算备件需求量的传统模型是概率模型,然而概率模型中的分布参数往往有一定程度的不确定性。本文对概率模型中含有有界不确定参数的备件需求量计算问题进行研究,根据航空装备备件的分类,分别提出了寿命服从指数分布、正态分布和威布尔分布部件的备件需求量的概率区间确定方法。所提出的方法较好地解决了分布参数有界不确定时航空装备备件的配置问题并能够充分保证备件的保障率,进而提高航空综合保障水平。最后,通过数值算例说明了该方法的有效性和实用性。     

基于模糊规划的航空公司混合营销渠道协调

为了对航空公司混合渠道进行更有效协调,根据渠道协调特点,运用区间分析法构建了需求不确定情况下航空公司混合渠道协调的模糊规划模型,并对模型进行了多维度数值模拟.结果表明,模型对不确定需求具有鲁棒性,适用于需求不确定下航空公司混合渠道协调;随着分销渠道比例下降,渠道协调鲁棒性呈现先升后降趋势;随着需求区间变大,模糊规划模型的隶属度呈现下降趋势.因此航空公司应适当降低分销渠道比例,同时加强市场调查缩小机票需求不确定区间范围;代理人应选择代理销售需求不确定性低的机票产品,并与航空公司合作适当降低分销渠道比例从而获得鲁棒双赢策略.     

基于动态时间阈值的报警聚合方法研究

针对网络入侵检测中持续性攻击引发的多个报警事件时间间隔变化的问题,引入时间间隔变异系数描述报警的时间波动特征;通过将报警数据属性分为时间约束属性和相似度约束属性,提出了一种利用动态时间阈值约束的相似报警数据聚合方法。实验结果表明,这种方法能有效减少持续性攻击触发的冗余报警。     

共信道干扰环境下星基ADS-B系统监视性能

星基广播式自动相关监视系统（星基ADS-B）是实现广域范围内航空器监视的主要技术手段。为揭示星基ADS-B系统共信道干扰对系统监视性能的影响，提出了星基ADS-B系统监视容量的计算方法。首先给出了星基ADS-B系统模型，随后理论分析给出消息正确接收概率、位置消息更新间隔及位置报告更新间隔的计算公式，以此为基础给出了星基ADS-B系统监视容量的计算公式，最后基于SNS软件构建了星基ADS-B仿真系统，仿真验证了理论结果的正确性。研究表明：星基ADS-B系统的监视容量由ADS-B应用子系统所要求的航空器位置报告更新间隔、航空器-卫星链路的误码率、星-地面站链路的误码率及卫星数目联合确定。     

Precise coseismic displacements from the GPS variometric approach using different precise products: Application to the 2008 MW 7.9 Wenchuan earthquake

The Global Positioning System (GPS) variometric approach has emerged as an attractive alternative to traditional well-developed positioning techniques including relative positioning and precise point positioning. Previous studies have demonstrated the capability of the variometric approach to retrieve coseismic displacements at centimeter-level precision, in a real-time manner using only readily available broadcast ephemeris. This study presents the first results comparing the performance of the variometric approach by using a variety of precise satellite orbit and clock products. Totally six kinds of products are included in our evaluation, namely the broadcast, IGS (International GNSS Service) ultra-rapid (predicted), ultra-rapid (observed), rapid, final (30-s clock) and CODE (Center for Orbit Determination in Europe) final (5-s clock) products. Static and dynamic experiments are conducted using 1-Hz GPS data covering a relatively large area in China during the 2008 Wenchuan M_W 7.9 earthquake. After removing the linear trend, the displacements using broadcast, ultra-rapid (predicted), ultra-rapid (observed) and rapid products reach nearly equivalent precisions at centimeter level. By using final and CODE final products, the precision of displacements can be significantly improved from 1.9–2.0 cm to 0.4–0.7 cm horizontally, and from 6.0–6.2 cm to 1.0–1.7 cm vertically for the dynamic experiments. The displacements using the CODE final products achieve the best precision, improved by more than 40% compared to those using the IGS final products. With the availability of IGS high-rate real-time precise products, this approach is promising to capture coseismic displacements more precisely in real time, which is crucial for earthquake and tsunami early warning.     

以可靠性为中心的基于状态维修的分析及其应用研究

根据国外资料编撰该研究报告.论述了基于状态维修的基本原理及实现基于状态维修的必要条件;说明了基于状态维修的分析程序;给出了支撑基于状态维修HUMS和信息系统一般要求.最后,以实例介绍了基于状态维修在直升机上的应用.本文旨在抛砖引玉,期待业界同仁共同关心直升机基于状态维修的改革和发展.