梯度磁场推进扩散火焰燃烧的实验研究

用数字粒子图像测速技术(DPIV)测量了扩散火焰周围气流在梯度磁场作用下的速度分布,并与无磁场作用下的速度分布比较。结果表明当梯度磁场作用于扩散火焰时,火焰周围气体运动被加速,火焰的形状变得尖锐,亮度增加。实验定量地验证了梯度磁场可以诱导气体对流的发生,从而进一步推进扩散火焰燃烧反应。     

硬质合金与结构钢钎焊结构低温力学性能试验

针对航天器产品恶劣工况对材料及连接方式高抗拉、抗剪强度力学性能的需求,设计试验验证了深低温至高温环境下真空钎焊与火焰钎焊试样拉伸与剪切性能：真空钎焊在-233 ℃条件下抗拉强度可达536 MPa、剪切强度可达260 MPa、-150 ℃时剪切强度300 MPa、常温剪切强度212 MPa,低温下剪切强度值更高且皆优于火焰钎焊对应温度下试样的结果。同时研究了真空钎焊工艺对合金钢40CrNiMoA材料性能的影响,真空钎焊工艺加工过程使材料本身抗拉强度下降约38%,表面硬度值下降约25%。并测量了真空钎焊试样200 ℃高温条件下抗拉强度为804 MPa,剪切强度为239 MPa。通过试验研究了不同焊接工艺对结构焊接后力学性能的影响,该试验结果对后续航天器结构设计工作具有一定的指导作用。     

模型燃烧室中值班火焰稳定器的燃烧不稳定性研究

针对值班火焰的燃烧不稳定性问题，通过试验得到了不同当量比工况下的火焰结构、压力脉动信号和热释放脉动信号。对脉动信号进行傅立叶分析，获得了脉动信号的频率和振幅。结果表明，随着当量比增加，火焰形态发生变化，燃烧室内发生了164Hz三阶模态向109Hz二阶模态的转换。对火焰平均结构、火焰瞬态结构和火焰正交分解（POD）结果进行分析后发现，漩涡脱落频率和燃烧室某一阶声学模态耦合是维持燃烧不稳定性的机理，耦合的强弱和漩涡脱落的尺度大小决定了热声振荡的振幅大小，火焰形态的变化导致热释放中心位置的变化是引起模态转换的机理。     

Effects of swirler position on flame response and combustion instabilities

This study is concerned with the experimental and theoretical investigation of the combustion instabilities in a premixed swirl combustor. It is focused on the effects of the swirl mixing distance on the intrinsic thermoacoustic mode. The swirler as an origin of the swirling flow is also the source of the flow disturbance, which has effects on the flame response. The location of the swirler is varied in the experiment to study the effect on combustion instabilities and flame transfer functions. ...     

Detailed modeling of aluminum particle combustion——From single particles to cloud combustion in Bunsen flames

A numerical model for aluminum cloud combustion which includes the effects of interphase heat transfer, phase change, heterogeneous surface reactions, homogeneous combustion,oxide cap growth and radiation within the Euler–Lagrange framework is proposed. The model is validated in single particle configurations with varying particle diameters. The combustion process of a single aluminum particle is analyzed in detail and the particle consumption rates as well as the heat release rates due to the v...     

Similarity phenomena of lean swirling flames at different bulk velocities with acoustic disturbances

In this study, flame responses to acoustic disturbances with different frequencies and amplitudes were experimentally investigated in a lean premixed swirl-stabilized combustor operating at different bulk velocities. The total heat release rate fluctuations and spatial CH* chemiluminescence distributions were captured using a photomultiplier tube and high-speed camera, respectively. The results indicate that the heat release rate exhibits a relatively drastic oscillation and high-order harmonics for low-frequency disturbances. When the bulk velocity and forcing frequency were doubled simultaneously, similar flame structures were observed in the CH* chemiluminescence distributions. As the bulk velocity increases, the gain of the Flame Describing Function (FDF) extends toward the higher frequencies, and the delay time of the flame response decreases. The similarity among FDFs at different bulk velocities was effectively captured by introducing a non-dimensional parameter, defined as the ratio of the flame response delay to the forcing time scale, to replace the dimensional forcing frequency. Furthermore, the availability of the newly defined non-dimensional parameter was verified for flames with different swirl numbers, as this played an important role in determining the flame structures and associated unsteady heat release rate.     

基于滑动弧的燃烧室头部强化燃烧特性

为了研究基于滑动弧的燃烧室头部强化燃烧效果，探究了燃烧室头部的点火过程以及不同等离子体电源输入功率下的点/熄火边界，利用像增强系统获得了CH*基团的分布云图。实验结果表明：输入功率的增大使得燃烧室的点/熄火边界均得到拓展，与160 W工况相比，输入功率为320 W时，点火边界平均拓宽约17.6%，与未放电相比，输入功率为320 W时，熄火边界平均拓宽约45.3%，滑动弧放电对熄火边界拓宽效果明显；当滑动弧能够点燃来流新鲜混合气时，输入功率的增加使得CH*基团分布向上游移动，当输入功率为320 W时，燃烧火焰驻留在燃烧室头部，当滑动弧激励器仅具有助燃作用时，输入功率的增加使得局部CH*基团辐射强度增强，热释放速率增加。     

微重力环境金属燃烧试验研究进展

以自由落体、抛物线飞行和模拟微重力流场3种典型的微重力试验原理,综述了微重力环境下气溶胶、颗粒和棒状3种形态的金属材料燃烧研究,包括镁、铝、钛等.详细介绍了微重力对金属燃烧速度、火焰结构、相变过程及特有的燃烧现象等特性的影响机理,阐述了微重力环境对揭示金属燃烧固有属性的优势,综述了现有微重力试验系统的优缺点和模拟微重力...     

面向超燃数值模拟的正癸烷高温骨架机理

为了得到一个适用于超声速燃烧模拟的小规模正癸烷骨架机理，以现有的正癸烷燃烧机理（S709）为基础，通过机理简化和参数对比优化的方法，构建了包含27个物种和105个反应的高温骨架机理（S27）。在温度（T：1000–2000 K）、压力（p：0.1–0.3 MPa）、当量比（Φ：0.5–1.5）的超燃典型工况范围内，通过Chemkin-Pro软件计算了S27对于层流火焰速度、点火延迟时间、熄火拉伸率的预测值，在0.1 MPa富燃条件（Φ=1.7）下，计算了主要物种浓度分布，并与文献正癸烷骨架机理（S40，S96）、S709的模拟值和实验数据进行对比，以验证机理的合理性。结果表明S27的计算结果与文献实验数据和S709结果吻合良好。通过研究S27在高温条件下含C物种的反应途径以及影响层流火焰速度的关键反应，进一步证明了S27的合理性。相较于S709及其他正癸烷骨架机理，S27极大地提升了计算效率，展现了此机理应用于超燃流场数值模拟的良好前景。     

客机隔热隔声棉点火特性与产烟毒性研究

为研究客机隔热隔声棉点火特性与产烟毒性,使用相关装置进行了试验研究.结果表明:点火持续时间和辐射板温度均对隔热隔声棉点火具有明显促进作用.点火持续时间越长,火焰沿Y轴蔓延距离越大,点火15s时,明火附近区域的隔热隔声棉出现被烧穿现象,但烧穿面积不大.火焰沿Y轴蔓延距离增长速率却随点火持续时间的增大而减小,验证了隔热隔声...