eLoran系统ASF网格应用算法研究

ASF网格是提高增强型罗兰（Enhanced Long Range Navigation,eLoran）系统精度的重要方法。根据所在网格四个顶点的附加二次时延（Added Secondary Factor,ASF）值通过网格应用算法得到待测试点的ASF值,一定程度上比公式计算的ASF值更准确。在计算过程中,用户四个顶点ASF值的测量误差会传递给用户,同时内插算法本身也会引入误差,此时内插算法的选择尤为重要。本文通过仿真、分析比较几种常用的内插算法,得出结论：反距离插值算法引入的误差最大,双线应插值算法引入的误差最小,而且误差呈现一定层次感,网格从内到外误差逐渐减小。     

小卫星侦察星座性能评估研究

针对小卫星侦察星座性能评估问题,从覆盖、成本和弹性三方面对小卫星侦察星座的性能指标进行研究,分别构建了考虑存储容量约束的覆盖能力评估模型、成本估计模型以及弹性能力评估模型。在覆盖能力评估模型中,将卫星存储容量作为约束条件,结合卫星覆盖几何模型分析了卫星对地侦察的工作条件,提出考虑存储容量的覆盖指标计算方法;通过小卫星成本模型(small satellite cost model,SSCM)对星座各分系统的成本进行估计;在弹性评估模型中,提出了星座性能损失率指标,并根据星座失效状态概率函数确定了不同失效状态下星座性能损失率的权重。将上述模型应用于SkySat和吉林一号星座的性能评估过程中,结果表明SkySat比吉林一号覆盖能力强、成本低,弹性差。提出的三个模型可用于评价星座优劣,为小卫星侦察星座的建设和性能评估工作提供参考。     

Downsizing an orbital space robot: A dynamic system based evaluation

Small space robots have the potential to revolutionise space exploration by facilitating the on-orbit assembly of infrastructure, in shorter time scales, at reduced costs. Their commercial appeal will be further improved if such a system is also capable of performing on-orbit servicing missions, in line with the current drive to limit space debris and prolong the lifetime of satellites already in orbit. Whilst there have been a limited number of successful demonstrations of technologies capable of these on-orbit operations, the systems remain large and bespoke. The recent surge in small satellite technologies is changing the economics of space and in the near future, downsizing a space robot might become be a viable option with a host of benefits. This industry wide shift means some of the technologies for use with a downsized space robot, such as power and communication subsystems, now exist. However, there are still dynamic and control issues that need to be overcome before a downsized space robot can be capable of undertaking useful missions. This paper first outlines these issues, before analyzing the effect of downsizing a system on its operational capability. Therefore presenting the smallest controllable system such that the benefits of a small space robot can be achieved with current technologies. The sizing of the base spacecraft and manipulator are addressed here. The design presented consists of a 3 link, 6 degrees of freedom robotic manipulator mounted on a 12U form factor satellite. The feasibility of this 12U space robot was evaluated in simulation and the in-depth results presented here support the hypothesis that a small space robot is a viable solution for in-orbit operations.     

格栅结构吸波性能探索研究

探索研究了格栅结构作为吸波结构的可能性,利用Floquet定理分析格栅结构传播电磁波的特性,通过传输线和等效电路法设计格栅结构,为展宽吸波频带和提高吸波性能,将电路屏引入格栅结构,结果表明当电路屏与格栅结构匹配时,含有电路屏的格栅结构在8～18GHz内反射率≤-5dB,在频率点为16.4GHz时最大峰值为-24.4dB.     

永磁同步电机驱动太阳翼扰动力矩建模与仿真

建立太阳翼驱动机构(SADA)永磁同步电机的电磁方程,并利用固定界面模态综合法建立SADA驱动太阳翼耦合系统的振动方程;设计模拟柔性负载,对SADA驱动该柔性负载的扰振力矩进行仿真分析。结果表明,SADA驱动柔性负载运行过程中所产生扰振力矩主要由两个原因引起：1)电流噪声引起的力矩波动;2)控制参数选取不当引起的转角波动。     

基于模因算法的飞机装配序列规划

针对飞机制造的装配序列规划问题,提出一种基于模因算法的飞机部件装配序列规划方法。在装配优先约束矩阵和非正交干涉矩阵的基础上构建装配规划模型,以飞机零部件间的装配方向和装配工具的差异性来构建适应度函数。在非干涉解空间中进行全局搜索,获得较优的装配规划方案,通过二叉树中序遍历法将较优的方案转化为可行解,再经过交叉操作和变异操作后,在可行解空间内进行局部搜索,最终获取较优的装配方案。以某型号的飞机舱门装配为例,通过与传统遗传算法对比,证实模因算法在飞机装配序列规划中的可行性和有效性。     

对转螺旋桨流场气动干扰数值模拟

基于结构网格动态面搭接技术,通过求解三维非定常雷诺平均纳维-斯托克斯(RANS)方程,对单独螺旋桨(SRP)滑流流场进行了数值模拟,结果与风洞试验数据吻合良好,在此基础上深入研究了对转螺旋桨（CRP）的非定常滑流效应及前后桨之间的气动干扰现象。计算结果表明:所采用的非定常RANS方法能够良好刻画对转螺旋桨滑流流场的发展变化特征,适用于分析前后桨气动干扰特性。前后桨桨尖涡的复杂相互作用是导致对转螺旋桨气动干扰的直接原因,后桨桨尖涡对于前桨桨尖涡具有一定耗散作用。在气动干扰影响下,对转螺旋桨气动力会产生周期性波动,波动周期与螺旋桨桨叶数相关, 6×6对转螺旋桨在1个旋转周期内产生了12次波动。气流穿过对转螺旋桨会发生两次加速,因此在相同工况下,对转螺旋桨的拉力系数和功率系数相比于单独螺旋桨分别增大约1倍,效率提升约1.5%。      

Hypervelocity impact induced shock acoustic emission waves for quantitative damage evaluation using in situ miniaturized piezoelectric sensor network

Manmade debris and natural meteoroids, travelling in the Low Earth Orbit at a speed of several kilometers per second, pose a severe safety concern to the spacecraft in service through the HyperVelocity Impact(HVI). To address this issue, an investigation of shock Acoustic Emission(AE) waves induced by HVI to a downscaled two-layer Whipple shielding structure is performed,to realize a quantitative damage evaluation. Firstly a hybrid numerical model integrating smoothparticle hydrodynamics and finite element is built to obtain the wave response. The projectiles, with various impact velocities and directions, are modelled to impact the shielding structure with different thicknesses. Then experimental validation is carried out with built-in miniaturized piezoelectric sensors to in situ sense the HVI-induced AE waves. A quantitative agreement is obtained between numerical and experimental results, demonstrating the correctness of the hybrid model and facilitating the explanation of obtained AE signals in experiment. Based on the understanding of HVI-induced wave components, assessment of the damage severity, i.e., whether the outer shielding layer is perforated or not, is performed using the energy ratio between the regions of ‘‘high frequency" and ‘‘low frequency" in the acquired AE signals. Lastly, the direct-arrival fundamentalsymmetric wave mode is isolated from each sensing signal to be input into an enhanced delay-andsum algorithm, which visualizes HVI spots accurately and instantaneously with different sensor network configuration. All these works demonstrate the potential of quantitative, in situ, and real time HVI monitoring using miniaturized piezoelectric sensor network.     

A CFD-based numerical virtual flight simulator and its application in control law design of a maneuverable missile model

A CFD-based Numerical Virtual Flight (NVF) simulator is presented, which integrates an unsteady flow solver on moving hybrid grids, a Rigid-Body Dynamics (RBD) solver and a module of the Flight Control System (FCS). A technique of dynamic hybrid grids is developed to control the active control surfaces with body morphing, with a technique of parallel unstructured dynamic overlapping grids generating proper moving grids over the deflecting control surfaces (e.g. the afterbody rudders of a missile). For the flow/kinematic coupled problems, the 6 Degree-Of-Freedom (DOF) equations are solved by an explicit or implicit method coupled with the URANS CFD solver. The module of the control law is explicitly coupled into the NVF simulator and then improved by the simulation of the pitching maneuver process of a maneuverable missile model. A nonlinear dynamic inversion method is then implemented to design the control law for the pitching process of the maneuverable missile model. Simulations and analysis of the pitching maneuver process are carried out by the NVF simulator to improve the flight control law. Higher control response performance is obtained by adjusting the gain factors and adding an integrator into the control loop.     

薄壁结构的加筋布局优化设计

采用拓扑优化方法研究了薄壁结构的加筋布局优化问题.考虑到航空航天领域薄壁加筋结构的大量使用与结构形式的复杂性,提出了一种适用于有限元自由网格剖分的加筋设计新方法--几何背景网格法.该方法一方面通过定义几何背景网格的大小,实现了加筋设计域内任意离散网格沿加筋高度方向的布局参数化定义;另一方面,通过背景网格曲线坐标系下的定义,实现了三维曲面薄壁壳结构的加筋布局设计.采用该方法分别对平面结构与曲面薄壁结构进行了以结构刚度最大为目标的加筋优化设计.数值结果表明,所提出的方法能有效获得合理的加筋布局.