基于高斯问题的近最优再入预测制导方法研究

再入过程中利用解算高斯问题建立落在地面固定目标的开普勒轨道,由于干扰力的存在,再入飞行器将偏离这条轨道,为此需要对再入飞行器进行速度修正。速度的修正方案有两种:一种是使修正后的轨道返回到事先装订到计算机上的标准轨道上,即标准轨道法;另一种是根据落点重新建立一条可落在固定目标的轨道,即预测制导法。文中利用牛顿迭代法对高斯问题进行优化,得到了可重新落在地面目标的最小速度修正量,得到了一种快速的近最优预测制导算法。仿真结果表明:此算法简单,运算速度快,需用过载小,且得到了较小的脱靶量。     

Estimation of orbital parameters of broken-up objects from in-situ debris measurements

Even sub-millimeter-size debris could cause a fatal damage on a spacecraft. Such tiny debris cannot be followed up or tracked from the ground. Therefore, Kyushu University has initiated IDEA the project for In-situ Debris Environmental Awareness, which conducts in-situ measurements of sub-millimeter-size debris. One of the objectives is to estimate the location of on-orbit satellite fragmentations from in-situ measurements. The previous studies revealed that it is important to find out the right nodal precession rate to estimate the orbital parameters of a broken-up object properly. Therefore, this study derives a constraint equation that applies to the nodal precession rate of the broken-up object. This study also establishes an effective procedure to estimate properly the orbital parameters of a broken-up object with the constraint equation.     

Indirect optimization for finite thrust orbit transfer and cooperative rendezvous using an initial guess generator

In this paper, the finite thrust nonplanar transfer and cooperative rendezvous are investigated. The indirect method is adopted in the optimization process. The energy-optimal to fuel-optimal continuation is performed by using the homotopy method. An initial guess generator (IGG) is designed based on a simplified dynamical model to overcome the difficulty in providing the initial guess. Some reasonable simplifications on the dynamical model are applied based on the near-circular near-coplanar transfer. The initial guess can be obtained by analytically solving a system of linear equations. Therefore, the IGG has high computational efficiency. Moreover, the terminal time and state are estimated by IGG to deal with the cooperative rendezvous problem. Numerical examples are presented and the validity of the “IGG-Homotopy” combined algorithm is verified.     

BeiDou-3 orbit and clock quality of the IGS Multi-GNSS Pilot Project

Within the Multi-GNSS Pilot Project (MGEX) of the International GNSS Service (IGS), precise orbit and clock products for the BeiDou-3 global navigation satellite system (BDS-3) are routinely generated by a total of five analysis centers. The processing standards and specific properties of the individual products are reviewed and the BDS-3 orbit and clock product performance is assessed through direct inter-comparison, satellite laser ranging (SLR) residuals, clock stability analysis, and precise point positioning solutions. The orbit consistency evaluated by the signal-in-space range error is on the level of 4–8 cm for the medium Earth orbit satellites whereas SLR residuals have RMS values between 3 and 9 cm. The clock analysis reveals sytematic effects related to the elevation of the Sun above the orbital plane for all ACs pointing to deficiencies in solar radiation pressure modeling. Nevertheless, precise point positioning with the BDS-3 MGEX orbit and clock products results in 3D RMS values between 7 and 8 mm.     

Improving the low orbit satellite tracking ability using nonlinear model predictive controller and Genetic Algorithm

The satellite motion on the reference orbit (RO) with less energy consumption has always persuaded researchers to design optimal control systems. The nonlinear nature and time-varying equations of motion make this quest more challenging. The present study proposes a novel control system for satellite motion on the RO by considering a comprehensive model of its dynamics in orbit and a Nonlinear Model Predictive Controller (NMPC). The NMPC calculates the sub-optimal control inputs of satellite motion reference on the elliptic orbit by minimizing a convex cost function at each stage. Moreover, all weighting parameters of the cost function are optimized by the Genetic Algorithm (GA) to produce less perturbation and guarantee the best NMPC performance. Finally, the implemented NMPC has been compared to a Linear MPC (LMPC). The results show that not only can the NMPC resist against larger errors and perturbations, but it can also compensate for those errors by returning the satellite to its main orbit and maintaining it.     

利用姿态机动的绳系卫星编队系统轨道协同控制

为克服绳系卫星编队系统在轨道机动过程中的系绳摆动现象，提出一种通过调整领航星推力方向进而实现编队系统轨道跟踪的控制算法。由于推力方向角与状态量互相耦合且少于系统自由度个数，轨道协同控制属于典型的非仿射欠驱动控制问题。针对此问题，首先采用升阶法将角速度作为虚拟控制输入；然后为各子系统设计子滑模面后加权得到高层滑模面和等效控制输入律，并设计观测器估计系统非线性项；其次基于模型预测控制算法优化得到最高层滑模面的趋近控制律；最后采用MATLAB/Simulink验证了所提控制算法的有效性。     

An atmosphere-breathing propulsion system using inductively coupled plasma source

CubeSats have attracted more research interest recently due to their lower cost and shorter production time. A promising technology for CubeSat application is atmosphere-breathing electric propulsion, which can capture the atmospheric particles as propulsion propellant to maintain long-term mission at very low Earth orbit. This paper designs an atmosphere-breathing electric propulsion system for a 3 U CubeSat, which consists of an intake device and an electric thruster based on the inductively coupled plasma. The capture performance of intake device is optimized considering both particles capture efficiency and compression ratio. The plasma source is also analyzed by experiment and simulation. Then, the thrust performance is also estimated when taking into account the intake performance. The results show that it is feasible to use atmosphere-breathing electric propulsion technology for CubeSats to compensate for aerodynamic drag at lower Earth orbit.