圆及椭圆轨道释放绳系子星的方法研究

研究绳系卫星系统质心沿椭圆轨道运动时，子星释放的最佳初始条件，运用变量替代简化动力学控制方程；对圆轨道运动的母星，采用轨道转移方法释放子星，计算弹射变轨参数及过渡轨道终了真近点角。本文取消母星质量远大于子星质量的假设，考虑子星释放过程中绳系卫星系统质心随子星运动的变化，所得结果更具有普遍意义。数值模拟结果表明，所述方法的有效性。     

Halo轨道族延拓方法及特性研究

对Halo轨道周期和运动范围等特性的研究是平动点任务设计的首要前提。针对大幅值Halo轨道和完整Halo轨道族的应用需求及其数值计算问题,面向当前应用广泛的地月系和日-地月系共线平动点,基于延拓法研究了圆型限制性三体问题下的Halo轨道族数值计算和运动学特性,给出了Halo轨道族延拓计算方法。数值仿真了族参数选择对轨道族计算的影响,得到了地月系和日-地月系共线平动点的大范围南北Halo轨道族,同时给出了轨道族的轨道周期变化和空间位置变化特性。研究结果表明,固定延拓步长下,L1点Halo轨道族应选择会合坐标系x坐标作为族参数,L2点Halo轨道族应选择y方向速度或者周期T作为族参数。方法适用于任意三体系统平动点的周期轨道族计算,特别是对其中的状态转移矩阵简单修改后可用于完整力模型下的Halo轨道（族）的数值设计。     

Impact analysis of the transponder time delay on radio-tracking observables

Accurate tracking of probes is one of the key points of space exploration. Range and Doppler techniques are the most commonly used. In this paper we analyze the impact of the transponder delay, $i.e$. the processing time between reception and re-emission of a two-way tracking link at the satellite, on tracking observables and on spacecraft orbits. We show that this term, only partially accounted for in the standard formulation of computed space observables, can actually be relevant for future missions with high nominal tracking accuracies or for the re-processing of old missions. We present several applications of our formulation to Earth flybys, the NASA GRAIL and the ESA BepiColombo missions.     

深空探测器定位在太阳系中特殊点上的有关问题

由于某些探测任务的需要,要将空间探测器定位在日-地空间的适当 位置上,日-地系统中的5个平动点就是首选的位置。因其平动点是否稳定关 系到探测任务能否完成,如果不稳定又如何采取轨控策略是任务的关键。鉴于 这一点,本文将阐明5个平动点的动力学特征,特别是对3个不稳定的共线平动 点Li(i=1,2,3),给出相应的轨控条件,并以仿真计算结果表明,采用一定的轨 控方式,可以使探测器保持在Li附近而不远离。     

基于微型固体推力器阵列的轨道控制点火算法

为了解决基于微型固体推力器阵列轨道控制的推力器组合点火问题,优化了阵列布局,使其适用于轨道控制,得出了推力器坐标位置分布律。在此基础上研究了推力器阵列组合点火算法,建立了相应数学模型,进行了算法验证。仿真结果表明,设计的推力器阵列优化方案能够满足皮纳卫星轨道控制要求,所建数学模型能有效解决点火问题,设计的算法能够实现较快寻址。     

基于圆形轨道的卫星位置递推方法

卫星无源定位系统对目标进行定位时,用于定位的卫星位置与时差或相位差等信息可能不同步,无法进行定位,需要把定位信息统一到同一时刻。针对这一问题,提出了基于圆形轨道的卫星位置递推方法,把卫星位置信息同其它信息统一到同一时刻,然后进行定位。该方法比常用的直线轨道递推方法误差更小,准确度更高,对提高定位精度具有较大应用价值。     

卫星轨道误差的相关性

卫星的轨道误差是卫星测控中需加以约定的重要指标之一,其常用的表示方法主要有Kepler轨道根数形式和RTN投影形式。本文推导了RTN形式的卫星位置、速度误差与Kepler根数误差间的关系,给出了近圆轨道中RTN形式位置、速度误差间的定量关系,分析了RTN形式位置误差约束下Kepler根数误差的相关性,并分别给出了验证算例。该结果可用于分析确定卫星轨道误差指标,使其彼此匹配。     

Orbit determination performances using single- and double-differenced methods: SAC-C and KOMPSAT-2

In this paper, Global Positioning System-based (GPS) Orbit Determination (OD) for the KOrea-Multi-Purpose-SATellite (KOMPSAT)-2 using single- and double-differenced methods is studied. The requirement of KOMPSAT-2 orbit accuracy is to allow 1 m positioning error to generate 1-m panchromatic images. KOMPSAT-2 OD is computed using real on-board GPS data. However, the local time of the KOMPSAT-2 GPS receiver is not synchronized with the zero fractional seconds of the GPS time internally, and it continuously drifts according to the pseudorange epochs. In order to resolve this problem, an OD based on single-differenced GPS data from the KOMPSAT-2 uses the tagged time of the GPS receiver, and the accuracy of the OD result is assessed using the overlapping orbit solution between two adjacent days. The clock error of the GPS satellites in the KOMPSAT-2 single-differenced method is corrected using International GNSS Service (IGS) clock information at 5-min intervals. KOMPSAT-2 OD using both double- and single-differenced methods satisfies the requirement of 1-m accuracy in overlapping three dimensional orbit solutions. The results of the SAC-C OD compared with JPL’s POE (Precise Orbit Ephemeris) are also illustrated to demonstrate the implementation of the single- and double-differenced methods using a satellite that has independent orbit information available for validation.     

Spinning solar sail orbit steering via spin rate control

The orbit of a solar sail can be controlled by changing the attitude of the spacecraft. In this study, we consider the spinning solar power sail IKAROS (Interplanetary Kite-craft Accelerated by Radiation Of the Sun), which is managed by Japan Aerospace Exploration Agency (JAXA). The IKAROS attitude, i.e., the direction of its spin-axis, is nominally controlled by the rhumb-line control method. By utilizing the solar radiation torque, however, we are able to change the direction of the spin-axis by only controlling its spin rate. With this spin rate control, we can also control indirectly the solar sail’s trajectory. The main objective of this study is to construct the orbit control strategy of the solar sail via the spin-rate control method. We evaluate this strategy in terms of its propellant consumption compared to the rhumb-line control method. Finally, we present the actual flight attitude data of IKAROS and the change of its trajectory.     

基于模糊聚类非负矩阵分解的软件缺陷预测

为了进一步提高对不平衡软件缺陷数据的预测精度,提出了一种基于模糊聚类非负矩阵分解的缺陷预测方法。该方法首先选取最近邻算法作为不平衡缺陷数据预测的基分类器,然后将非负矩阵分解算法引入软件缺陷预测领域,并提出利用模糊聚类初始化非负矩阵分解算法的思路。该方法一方面解决了最近邻算法处理多属性缺陷数据时计算量大导致性能降低的问题,另一方面克服了非负矩阵分解的随机初始化导致结果陷入局部最优的不足,提高了不平衡软件缺陷数据的预测精度。最后通过两组算例验证了方法的有效性。