Advances in critical technologies for hypersonic and high-enthalpy wind tunnel

Hypersonic and high-enthalpy wind tunnels and their measurement techniques are the cornerstone of the hypersonic flight era that is a dream for human beings to fly faster, higher and further. The great progress has been achieved during the recent years and their critical technologies are still in an urgent need for further development. There are at least four kinds of hypersonic and high-enthalpy wind tunnels that are widely applied over the world and can be classified according to their operation modes. These wind tunnels are named as air-directly-heated hypersonic wind tunnel, light-gas-heated shock tunnel, free-piston-driven shock tunnel and detonation-driven shock tunnel, respectively. The critical technologies for developing the wind tunnels are introduced in this paper, and their merits and weakness are discussed based on wind tunnel performance evaluation. Measurement techniques especially developed for high-enthalpy flows are a part of the hypersonic wind tunnel technology because the flow is a chemically reacting gas motion and its diagnosis needs specially designed instruments. Three kinds of the measurement techniques considered to be of primary importance are introduced here, including the heat flux sensor, the aerodynamic balance, and optical diagnosis techniques. The techniques are developed usually for conventional wind tunnels, but further improved for hypersonic and high-enthalpy tunnels. The hypersonic ground test facilities have provided us with most of valuable experimental data on high-enthalpy flows and will play a more important role in hypersonic research area in the future. Therefore, several prospects for developing hypersonic and high-enthalpy wind tunnels are presented from our point of view.     

高速BPSK相干光通信系统对激光器线宽要求

文章概述了激光器相位噪声对零差相干检测光通信系统性能的影响，对特定的基于平衡探测的科斯塔斯（Costas）环路接收系统相位误差进行了详细的理论分析，最后获得了不同传输码速率下的零差相干检测光通信系统对激光器线宽的具体要求。     

计算机在光栅和线纹检测中的应用

介绍了一个将PC机和8031单片机组成的计算机系统应用于光栅尺、线纹尺检测的实例。     

基于实测星载原子钟数据的脉冲星守时方法

利用脉冲星估计星载原子钟钟差是实现卫星自主守时的途径之一。为充分分析基于脉冲星的自主守时系统性能，利用实测的星载原子钟钟差数据和中子星内部组成探测器(neutron star interior composition explorer, NICER)的PSR B1937+21脉冲星的观测数据，对比分析了星载原子钟和脉冲星的误差特性。设计了脉冲星守时系统框架和星载原子钟钟差估计方法。以实测的星载原子钟钟差数据为基础，计算分析了脉冲星守时系统的性能。计算结果表明，若脉冲星的脉冲到达时间（time of arrival, TOA）解算精度为1 μs/30 d，则原子钟钟差估计精度可达到优于1 μs的水平，初步验证了脉冲星守时系统的可行性。     

某型飞机机身合拢总装型架设计新技术

某型飞机机身合拢总装型架，在设计上采用了先进制造技术。型架上装有目前国际先进的光学坐标系统，型架地基采用整体框架式底盘。型架结构为分散式。按飞机飞行状态在型架中摆放，并由上方起吊形式下架。本文简要介绍了该型架的设计、制造情况及效果。     

微机在发展光学计测中的作用

通过列举材料，阐述了微型电子计算机的特点与功能，微机在光学计测中的作用，展望了微机在未来光学计测中的应用前景。     

一种非接触光外差轮廓仪

介绍了一种纳米级非接触超高精度光外差轮廓仪。该量仪是基于普通光路的外差干涉仪,两束具有微小频差的激光束照射到制件表面:其中一束光被会聚后作为测量光针扫瞄制件表面;另一束光则被用作参考光束。这两束光经反射后形成干涉,所得信号的光程差与制件表面高度变化成正比。量仪的横向分辩力小于2μm,垂直分辩力小于1nm。制件不需要进行大的调整。制件表面同时亦被作为测量参考面。经光电转换后,信号由微机处理,从而快速完成测量、计算、显示与打印各种参数与图形。     

The adjusted optical properties for Galileo/BeiDou-2/QZS-1 satellites and initial results on BeiDou-3e and QZS-2 satellites

Solar Radiation Pressure (SRP) is the dominant non-gravitational perturbation for GNSS (Global Navigation Satellite System) satellites. In the absence of precise surface models, the Empirical CODE Orbit Models (ECOM, ECOM2) are widely used in GNSS satellite orbit determination. Based on previous studies, the use of an a priori box-wing model enhances the ECOM model, especially if the spacecraft is a stretched body satellite. However, so far not all the GNSS system providers have published their metadata. To ensure a precise use of the a priori box-wing model, we estimate the optical parameters of all the Galileo, BeiDou-2, and QZS-1 (Quasi Zenith Satellite System) satellites based on the physical processes from SRP to acceleration. Validation using orbit prediction proves that the adjusted parameters of Galileo and QZS-1 satellites exhibit almost the same performance as the corresponding published and “best guess” values. Whereas, the estimated parameters of BeiDou-2 satellites demonstrate an improvement of more than 60% over the initial “guess” values. The resulting optical parameters of all the satellites are introduced into an a priori box-wing model, which is jointly used with ECOM and ECOM2 model in the orbit determination. Results show that the pure ECOM2 model exhibits better performance than the pure ECOM model for Galileo, BeiDou-2 GEO and QZS-1 orbits. Combined with the a priori box-wing model the ECOM model (ECOM+BW) results in the best Galileo, BeiDou-2 GEO and QZS-1 orbits. The standard deviation (STD) of satellite laser ranging residuals reduce by about 20% and 5% with respect to the pure ECOM2 model for Galileo and BeiDou-2 GEO orbits, while the reductions are about 40% and 60% for QZS-1 orbits in yaw-steering and orbit-normal mode respectively. BeiDou-2 IGSO and MEO satellite orbits do not benefit much from the a priori box-wing model. In summary, we suggest setting up a unified SRP model of ECOM+BW for Galileo, QZS-1, and BeiDou-2 orbits based on the adjusted metadata. In addition, we estimate the optical parameters of BeiDou-3e and QZS-2 satellites using a limited number of tracking stations. Results regarding the unified SRP model indicate the same advantages, the STD of satellite laser ranging residuals reduces by about 30% and 20% for QZS-2 and BeiDou-3e orbits respectively over orbit products without a priori model. The estimation procedure is effective and easy to apply to the new emerging satellites in the future.     

夜气辉对天基光学碎片探测的影响分析

设计并完成了夜气辉背景下的天基碎片观测试验，获取了综合谱段的观测数据。基于观测数据进行夜气辉的辐射特性及其对天基碎片探测的影响分析。结果表明，夜气辉辐射随纬度和高度呈现一定的分布特点，这些特点均符合夜气辉的理论分布规律。在约90 km处辐射最强，亮度可达到单位积分时间每平方角秒近15星等，这对恒星及碎片提取概率影响较大，其中，13等星的提取概率仅为40.5%。