高校图书馆期刊管理服务创新举措

高校图书馆期刊管理工作需立足本校实际情况,提高期刊信息服务意识及采购质量,建立合理的馆藏期刊结构,创新期刊管理服务措施,拓展期刊服务内涵。高效发挥期刊信息的作用,提高期刊资源利用率,更好地为读者服务。     

高校图书馆随书光盘管理模式的研究

本文通过对京津地区多所高校图书馆随书光盘管理模式的调研,结合本馆现状,分析了各方面的利弊,对规范随书光盘管理模式的必要性、可行性进行了研究和探讨,从多个角度,提出了高校馆规范随书光盘管理模式的方法和建议。     

航天器C51语言软件中断资源冲突分析方法

对航天器C51语言软件中常见的3种中断资源访问冲突情况进行了归纳总结.由目前软件资源冲突分析方法的比较结果,提出基于静态分析技术的C51语言软件资源访问冲突分析方法,并针对上述情况给出了具体分析流程.该方法可以解决多种C51语言软件中断资源访问冲突问题,也可以推广到其他处理器.     

Comparison Structure Forms Between Isogrid and Orthogrid of C/ E CompositeTrellis Wound Structure Based on Calculation of Load Carrying

This paper calculated load carrying of isogrid and orthogrid of carbon epoxy composite trellis wound
structure (C/ E CTWS) using non linear finite element method. Based on the analysis, test cases were designed and
tests of axial compression were carried. Analysis result and test result fit well. In order to be used in the project, this
kind of structure cut out repairing was calculated. The method presented in this paper has been proved and can be used
to solve complicated engineering problems. According to calculations and experimental results combined with applica
tion, a principle of choosing wound structure is obtained and principle could be applied to engineering.
     

超高温陶瓷改性C/SiC复合材料的制备及其性能

以碳纤维为增强体,聚碳硅烷和聚烷基铪为前驱体,采用前驱体浸渍裂解(PIP)工艺制备C/Si C-HfC复合材料,将其与同种工艺所得C/SiC复合材料进行对比评价分析。发现C/SiC-HfC复合材料具有较低密度和较好的高温力学性能,且在1 650℃静态氧化实验中,含有HfC的基体对纤维具有更佳保护效果。C/SiC-HfC密度约为1.92 g/cm~3,常温弯曲强度为345 MPa,1 800℃高温无氧环境弯曲强度可达424 MPa。C/SiC-HfC复合材料表现出更加优异高温力学性能是由于HfC组分的添加抑制了SiC晶粒的生长,降低了基体内部较大裂纹产生的概率。在1 650℃空气环境下,含有HfC的基体对纤维具有更佳保护作用,主要是由于HfC组分的添加使材料表面的SiC及时氧化成SiO_2,SiO_2在纤维和基体表面形成包覆层,防止了材料内部的进一步氧化。     

A novel method of utilizing static mixer to obtain mixing homogeneity of multi-species powders in laser metal deposition

Real-time mixing of multi-species powder challenges Laser Metal Deposition (LMD) of Functionally Graded Materials (FGMs). The current work proposes a novel method of using a static mixer to realize rapid, uniform multi-species powder mixing. Firstly, copper powder and 316L stainless steel powder are selected to complete the powder mixing observation experiment with Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS). Secondly, computational fluid dynamics and particle mixing simulation models are used to analyze the flow field and particle motion characteristics in the static mixer. Finally, LMD experiment and metallographic observation are carried out with 316L stainless steel powder and WC powder to verify the feasibility of the static mixer. This study provides a theoretical and practical basis for powder mixing in laser processing with a static mixer. The conclusions can also be applied to other processing fields requiring real-time and uniform mixing of multi-species powders.     

Static magnetic field analysis of hollow-cup motor model and bow-shaped permanent magnet design

The hollow-cup Permanent Magnet (PM) motors have the characteristics of low power consumption, and are widely used in the aerospace field. At present, the tile-shaped PMs used by hollow-cup PM motors have poor sinusoidal characteristics of the air gap magnetic flux density waveform, which will cause torque ripple. The existing method for improving the air gap magnetic flux density waveform is not very effective when applied to hollow cup, a special motor with no stator core and large air gap. A bow-shaped PMs structure is designed for the hollow-cup motor in this paper. First, the equivalent surface current method is used to calculate the analytical formula of the static magnetic field of the model. Then, the Finite Element (FE) method is used to calculate the static air gap flux density waveform of conventional tile-shaped PMs and bow-shaped PMs with different bow heights, and the corresponding harmonics and sine distortion are obtained by Fourier decomposition. The simulation results show that the bow-shaped PMs can effectively improve the sinusoidal characteristics of the static air gap flux density waveform. And the suitable bow height is determined. Finally, a prototype is made based on the suitable bow height for experiments, and compared with the analytical result and the FE result, and the accuracy and effectiveness of the bow-shaped PMs with the suitable bow height are verified.     

基于Arinc661的CDS标准部件库的设计与实现

本文提出了一种Arinc 661规范的解决方案,它采用VapsXT为工具,针对座舱显示应用,设计并实现了一个符合规范的座舱显示系统标准部件库框架,为研发航电显示产品提供了更为便利的平台.实验结果表明,通过本文提出的座舱显示系统内核标准部件库框架,可以方便地对部件库进行扩展.     

独立电力系统大容量爆炸式高速分断机构

大型舰船、洞库和地铁等独立电力系统对于供电的可靠性要求较高,但是短路电流大多难以分断,必须采取限流分断措施。文章针对上述场合的特殊环境,从温升和分断特性两个方面综合考虑,开展了爆炸桥式高速分断机构的研究,得到了机构关键参数的设计依据。在此基础上研制的380V／2500A机构样机额定通流最高温升为38．3K,分断时间为2...     

铺层区域划分对大展弦比机翼静气动弹性影响

为了研究铺层区域变量对大展弦比机翼静气动弹性的影响，本文在考虑几何非线性影响下，依据有限元分析，研究了外翼段铺层区域的划分以及90°铺层角度的个数对大展弦比机翼静气动弹性特性的影响。结果表明，0°、±45°、90°混合铺层的铺设效果优于只有0°、±45°铺层的区域；机翼变形情况随着外翼段铺层区域的增大而减小，且减小斜率逐步增大；外翼段铺层区域固定时，增加90°铺层角度个数会有效减小机翼变形，且机翼变形情况与增加的个数基本呈现负相关关系，其个数在铺层设计中可能存在一个最佳取值或最优占比。