HTPB复合固体推进剂含损伤和老化本构研究

通过热氧老化实验、声发射损伤检测实验和蠕变柔量测试实验确定HTPB复合固体推进剂非线性本构关系，并与Schapery非线性本构方程进行比较，结果表明，含损伤老化模型较好地解释了HTPB复合固体推进剂的非线性特征，可以应用分析HTPB复合固体推进剂的力学特性。     

航空发动机多变量模糊滑模变结构模型跟踪控制

针对现代航空发动机是一个具有不确定性的强非线性系统,结合滑模变结构控制和模糊逻辑系统的优点,提出了一种模糊滑模变结构模型跟踪控制方法。采用比例积分型切换超平面设计滑模变结构控制系统,使用模糊逻辑系统自适应调节切换增益,得到某涡扇发动机的模糊滑模变结构模型跟踪控制器。数字仿真结果表明,所设计的控制器不但能使被控对象较好地跟踪参考模型,消除抖振现象,而且对系统的不确定性具有不变性,保证了被控系统在整个控制阶段都具有较强的鲁棒性。     

Practical compensation for nonlinear dynamic thrust measurement system

The real dynamic thrust measurement system usually tends to be nonlinear due to the complex characteristics of the rig, pipes connection, etc. For a real dynamic measuring system,the nonlinearity must be eliminated by some adequate methods. In this paper, a nonlinear model of dynamic thrust measurement system is established by using radial basis function neural network(RBF-NN), where a novel multi-step force generator is designed to stimulate the nonlinearity of the system, and a practical compensation method for the measurement system using left inverse model is proposed. Left inverse model can be considered as a perfect dynamic compensation of the dynamic thrust measurement system, and in practice, it can be approximated by RBF-NN based on least mean square(LMS) algorithms. Different weights are set for producing the multi-step force, which is the ideal input signal of the nonlinear dynamic thrust measurement system. The validity of the compensation method depends on the engine’s performance and the tolerance error0.5%, which is commonly demanded in engineering. Results from simulations and experiments show that the practical compensation using left inverse model based on RBF-NN in dynamic thrust measuring system can yield high tracking accuracy than the conventional methods.     

Adaptive Gaussian sum squared-root cubature Kalman filter with split-merge scheme for state estimation

The paper deals with state estimation problem of nonlinear non-Gaussian discrete dynamic systems for improvement of accuracy and consistency. An efficient new algorithm called the adaptive Gaussian-sum square-root cubature Kalman filter（AGSSCKF） with a split-merge scheme is proposed. It is developed based on the squared-root extension of newly introduced cubature Kalman filter（SCKF） and is built within a Gaussian-sum framework. Based on the condition that the probability density functions of process noises and initial state are denoted by a Gaussian sum using optimization method, a bank of SCKF are used as the sub-filters to estimate state of system with the corresponding weights respectively, which is adaptively updated. The new algorithm consists of an adaptive splitting and merging procedure according to a proposed split-decision model based on the nonlinearity degree of measurement. The results of two simulation scenarios（one-dimensional state estimation and bearings-only tracking） show that the proposed filter demonstrates comparable performance to the particle filter with significantly reduced computational cost.     

Gust response analysis and wind tunnel test for a high-aspect ratio wing

A theoretical nonlinear aeroelastic response analysis for a flexible high-aspect ratio wing excited by harmonic gust load is presented along with a companion wind tunnel test. A multidisci-plinary coupled numerical calculation is developed to simulate the flexible model wing undergoing gust load in the time domain via discrete nonlinear finite element structural dynamic analysis and nonplanar unsteady vortex lattice aerodynamic computation. A dynamic perturbation analysis about a nonlinear static equilibrium is also used to determine the small perturbation flutter bound-ary. A novel noncontact 3-D camera measurement analysis system is firstly used in the wind tunnel test to obtain the spatial large deformation and responses. The responses of the flexible wing under different static equilibrium states and frequency gust loads are discussed. The fair to good quanti-tative agreements between the theoretical and experimental results demonstrate that the presented analysis method is an acceptable way to predict the geometrically nonlinear gust response for flex-ible wings.     

基于自适应差分进化算法的变循环发动机模型求解方法研究

为了降低传统迭代算法在求解变循环发动机非线性模型时对初值的依赖性,将模型的求解问题转换为求最小值的优化问题,引入差分进化算法进行模型的求解,并提出一种自适应差分进化算法(ADE)。ADE借助轮盘赌选择法,利用种群的进化经验可以自适应的选择最适合当前种群的差分策略与算法控制参数。针对变循环发动机四个典型工作点的模型求解问题,研究了标准差分进化算法(SDE)的控制参数对其性能的影响,获取了SDE在求解四个典型工作点时的最优控制参数组合,对比分析了ADE与SDE的性能差异,最后研究了种群规模对ADE性能的影响。结果表明：SDE在求解发动机模型时具有较好的鲁棒性,在求解不同工作点时算法的最优控制参数并不完全相同;相比于使用最优控制参数的SDE,ADE可以在不影响算法鲁棒性的情况下提升效率50%以上;减少ADE的种群规模会在提升算法效率的同时破坏鲁棒性。     

金属增材制造数据处理与工艺规划研究综述

金属增材制造数据处理与工艺规划是金属增材制造软件系统的核心,涵盖了金属支撑结构设计、模型切片以及路径规划等内容,决定着最终金属零部件的产品性能.从金属增材制造模型前处理出发,较为全面地概述了与之相关的多类型支撑设计和新型支撑优化等数据处理内容,针对金属增材制造数据处理中模型切片这一关键环节,分别从平面切片、自适应切片和...     

非对称结构损伤飞机鲁棒容损控制器设计

当飞机发生非对称结构损伤时,飞机的质量、重心位置和气动特性都会发生突变,飞机机体的对称性遭到破坏,致使飞机的横纵向间运动产生强烈的耦合。针对飞机发生非对称结构损伤时导致的飞行控制问题,建立了非对称结构损伤飞机的损伤模型,并基于一种新型鲁棒容损控制策略,采用非线性扩张状态观测器和非线性动态逆相结合的方法,对飞机的姿态控制器进行了设计,兼顾了飞机系统的性能和对损伤的鲁棒性。最后,基于NASA的通用运输机模型,对所设计控制器的控制效果进行了仿真验证。仿真结果表明,设计的姿态控制器有效地抑制了非对称结构损伤给飞机控制系统带来的不确定性和扰动,具有较好的控制性能。     

大飞机数字化装配关键技术及其应用

为满足大型飞机的数字化研制需求,对大型飞机数字化装配的主要关键技术进行了研究.对面向MBD的装配工艺仿真与数字化协调、装配仿真优化与在线装配仿真、三维装配工艺数据可视化、板件数字化自动钻铆的配套技术等大飞机数字化装配技术及其工程应用进行了重点分析,提出了各关键技术的解决方案.     

2.5维编织树脂基复合材料平板多尺度动力学模型修正

在2.5维编织树脂基复合材料多尺度固有振动分析的基础上,开展基于实测结构模态数据的复合材料平板动力学模型修正研究,以获取精准反映其动力学特性的模型。首先,建立复合材料平板固有频率对弹性参数的灵敏度分析方法,分析了平板固有振动特性的主要影响因素;其次,建立基于灵敏度分析的复合材料多尺度动力学模型修正方法,形成了基于MSC.NASTRAN平台的模型修正程序。最后,利用实测结构模态测试数据,实现对复合材料平板动力学模型的修正。结果表明,对关键弹性参数进行修正后,不同边界条件和纱线走向的复合材料平板试验件固有频率实测数据与仿真数据的最大误差由10.44%下降至2.39%,相关性得到了大幅改善。此外,所提出的自由模态测试方案结合动力学模型修正方法,为复合材料等效弹性参数的试验辨识提供了新的技术途径。