一种基于频谱拟合的信号去噪方法

通常我们采用Fourier变换的方法对信号进行去噪 ,本文尝试提出一种新的方法滤除高频噪声与干扰以解决Fourier变换去噪的缺陷 ,在此称为频谱拟合去噪方法。     

低轨卫星的北斗反射信号海洋覆盖分析

北斗系统作为我国自行研制的导航系统，具有独特的混合星座特性，其反射事件在海洋上的空间分布和覆盖性能的研究成果较少。针对上述问题，模拟了北斗三号（Beidou System 3，BDS3）以及全球定位系统（Global Positioning System，GPS）空间星座，模拟不同性能参数的低轨接收卫星，在此仿真系统的基础上，计算反射事件在各仿真场景下的海洋覆盖率以及同时发生反射事件的卫星数量。结果表明：BDS3与GPS相比具有更大的反射事件海洋覆盖率，覆盖性能更优；仿真周期7天与1天相比,前者卫星产生的反射事件海洋覆盖率约为后者5倍；低轨道卫星（Low Earth Orbit,LEO）轨道高度越高，天线波束角度越大，反射事件海洋覆盖率越大；3颗LEO卫星下同时发生反射事件卫星数的平均值约为单颗LEO卫星的3倍。可通过设计多星组网来提高反射事件海洋覆盖率。研究结果对星载反射技术海洋遥感应用方面有一定的参考价值。     

Modified fast Fourier transform in FBMC for satellite communications

In this paper,a Doppler scaling fast Fourier transform (Doppler-FFT) algorithm for filter bank multi-carrier (FBMC) is proposed,which can efficiently eliminate the impact of the Doppler scaling in satellite communications.By introducing a Doppler scaling factor into the butterfly structure of the fast Fourier transform (FFT) algorithm,the proposed algorithm eliminates the differences between the Doppler shifts of the received subcarriers,and maintains the same order of computational complexity compared to that of the traditional FFT.In the process of using the new method,the Doppler scaling should be estimated by calculating the orbital data in advance.Thus,the inter-symbol interference (ISI) and the inter-carrier interference (ICI) can be completely eliminated,and the signal to interference and noise ratio (SINR) will not be affected.Simulation results also show that the proposed algorithm can achieve a 0.4 dB performance gain compared to the frequency domain equalization (FDE) algorithm in satellite communications.     

Evaluation and analysis on positioning performance of BDS/QZSS satellite navigation systems in Asian-Pacific region

By using the observation data and products of precise obit and clock offset from Multi-GNSS Experiment (MGEX) of the International GNSS Service (IGS) and GNSS Research Centre, Curtin University in this paper, the positioning performance of BDS/QZSS satellite navigation system has been analyzed and evaluated in aspects of the quantity of visible satellites, DOP value, multipath effect, signal-to-noise ratio, static PPP and kinematic PPP. The analysis results show that compared to BDS single system when the cutoff angle are 30°and 40°, the DOP value of BDS/QZSS combined system has decreased above 20%, and the quantity of visible satellites increased about 16–30% respectively, because of the improved spatial geometric configuration. The magnitude of satellite multipath effect of BDS system shows the trend of MEO?>?IGSO?>?GEO, which is consistent with that of QZSS satellite system, as the constellation structure of the two systems is similar. The variation tendencies of signal-to-noise ratio with respect to elevation angle of the two systems are almost the same at all frequencies, showing that at the same elevation angle the signal-to-noise ratio of MEO satellites is higher than that of IGSO satellites, as the higher obit is the lower transmitting power is obtained. For having a specially designed obit, the variation of signal-to-noise ratio of BDS system is more stable. However, the magnitude of signal-to-noise ratio of QZSS system appears the trend of frequency 3?>?frequency 2?>?frequency 1. The static PPP performance of the BDS/QZSS combination system has been improved more significantly than the BDS single system in E, N and U directions. When the cutoff angle are at 7°, 15° and 30°, the PPP accuracy is increased about 25–34% in U direction, 10–13% and 23–34% in E and N directions respectively. When the elevation angle is large (40°), compared to BDS single system at lower elevation angles (7° and 15°) the PPP accuracy of the BDS/QZSS combination system is improved above 30% in U direction. In kinematic PPP performance, compared to BDS single system, the accuracy, availability and reliability of the BDS/QZSS combination system has been improved too, especially at large elevation angles (30° and 40°), the kinematic PPP accuracy in E and U directions has been improved about 10–50%, and above 50% in U direction. It can be concluded that the combination with QZSS system can improve the positioning accuracy, reliability and stability of BDS system. In the future, with the improvement of the satellite construction of Japan’s QZSS system and the global networking of China’s BDS satellites, the QZSS satellites will contribute greatly to improve the positioning accuracy, reliability, availability and stability of GNSS systems in areas such as cities, mountains, densely-packed buildings and severely covered areas in Asian-Pacific region.     

变幅单频交流信号幅度的同步采集方法

叙述和介绍了采集交流信号的常用方法，指出了常用方法在采集幅度快速变化的交流小信号时存在的缺陷。在此基础上提出了一种新的交流信号同步采集方法，适合于对采样率和采集精度要求较高的场合。     

CCD相机模／数变换位数的分析

模数变换是CCD遥感相机成像链路中的一个关键环节,对这一过程进行深入分析和优化设计将有助于提高CCD相机的整体性能。该文通过建模和仿真分析了不同的模数变换量化位数和不同量化方案对系统信噪比的影响。     

星载合成孔径雷达的数字成像处理

对星载合成孔径雷达的数字成像处理过程进行了详细的阐述，其中包括点目标回波信号的分析，距离压缩，距离徙动校正，方位压缩，多普勒参数估计，参考函数的形成和更新，多视处理等内容。还介绍了数字成像处理的实现方法     

5cm高稳频介质谐振器振荡源的研究与设计

介绍了Ｃ波段介质稳频振荡器的相关理论，给出一系列决定振荡器频率的理论公式，并通过设计实例证明了反馈型振荡器具有易于设计、调试及批生产的工程应用特性，同时发现该振荡器的另一优良特性：低相位噪声。     

一种新颖的幅频特性测量方法

阐述了一种仅采用信号源和频谱仪两种仪器，测量幅频特性的新颖方法，并给出了一个测量卫星转发器幅频特性的实际例子。     

序列偶及其应用

提出了序列偶和序列偶的周期与非周期自相关函数的概念，给出了最佳二进序列偶和二元互补序列偶两种最佳信号的例子，并讨论了序列偶在工程应用中的一些问题。