New trade tree for manned mars missions

Recent studies on human missions to Mars suggest revisiting the parameters that have the most important impact on the complexity, the initial mass in low Earth orbit, the risks and the development costs for the first journey to the red planet. In the last NASA reference mission, a trade tree is proposed.     

Analytic and numerical treatment of motion of dust grain particle around triangular equilibrium points with post-AGB binary star and disc

This paper investigates the motion around the triangular equilibrium points, of a passively gravitating dust particle in the gravitational field of a low-mass post-AGB binary system, surrounded by circumbinary disc. The two bodies of the binary are modeled as a triaxial star and a radiating-oblate star. Due to small deviation of disc stars on circular orbits, we have assumed that the Coriolis and centrifugal forces of the stars are slightly perturbed. The triangular equilibrium points of the particle are found. These points are defined by, triaxiality of the primary star, oblateness and radiation of the secondary one and the gravitational potential from the disc mass. Further, when the disc mass increases, the particle moves nearer to the stars and farther away from the disc. In general, these equilibrium points are linearly stable when μ < μ_C; where μ is the mass ratio and μ_C is the critical mass function, defined by the parameters of the system. The effects of each of these parameters on the size of the stability region are stated, and the periodic motion around the stable points is examined. It is seen that the orbits are ellipses, and the orientation, eccentricities, lengths of the semi-major and semi-minor axes are influenced by the parameters of the problem. In particular, for our numerical linear stability analysis, we have taken an extremely depleted pulsating star, IRAS 11472-0800 as the post-AGB triaxial star, with a weakly-radiating young white dwarf star; G29-38 as the secondary. For this system, the stability result of the triangular points comes out different. Here, μ_C < μ throughout the entire range of the mass ratio and the critical mass function. Hence, the triangular equilibrium points are unstable. The stability of the orbits is tested using the Poincaré surfaces of section (Pss). The region of stability is controlled by the introduced parameters and the Jacobi constant.     

Alternative transfer to the Earth–Moon Lagrangian points L4 and L5 using lunar gravity assist

Lagrangian points L4 and L5 lie at 60° ahead of and behind the Moon in its orbit with respect to the Earth. Each one of them is a third point of an equilateral triangle with the base of the line defined by those two bodies. These Lagrangian points are stable for the Earth–Moon mass ratio. As so, these Lagrangian points represent remarkable positions to host astronomical observatories or space stations. However, this same distance characteristic may be a challenge for periodic servicing mission. This paper studies elliptic trajectories from an Earth circular parking orbit to reach the Moon’s sphere of influence and apply a swing-by maneuver in order to re-direct the path of a spacecraft to a vicinity of the Lagrangian points L4 and L5. Once the geocentric transfer orbit and the initial impulsive thrust have been determined, the goal is to establish the angle at which the geocentric trajectory crosses the lunar sphere of influence in such a way that when the spacecraft leaves the Moon’s gravitational field, its trajectory and velocity with respect to the Earth change in order to the spacecraft arrives at L4 and L5. In this work, the planar Circular Restricted Three Body Problem approximation is used and in order to avoid solving a two boundary problem, the patched-conic approximation is considered.     

厚度和环境对复合涂层导电性能的影响

为了给数字化刻铣曲面频率选择表面(FSS)结构的制作和加工提供参考和依据,对比研究了含片状银粉颗粒的聚氨酯基和环氧树脂基2种复合导电涂层的基本性能,并通过环境加速试验,重点研究了温度、湿度以及腐蚀气氛对2种导电涂层的界面强度、微观结构和导电性能的影响.通过电桥法测量涂层表面电阻的变化,并通过扫描电境观察环境试验前后,涂层表面和剖面的微观结构和形貌变化.试验结果表明:聚氨酯基涂层的综合性能优于环氧树脂基涂层;在实验所涉及的参数变化范围内,环境因素对2种涂层与基体的界面结合影响不大,但对其导电性能的影响比较明显.环境因素对导电性能的削弱作用,源于相应过程中导电涂层的微观结构损伤.     

中间相沥青基碳纤维表面特性和界面粘结性能

针对高模量、高热导率中间相沥青基碳纤维复合材料界面性能弱等瓶颈问题,深入研究该类纤维表面特性及其与树脂的界面粘结性能。选取3种典型中间相沥青基碳纤维,测试分析其微观形貌、表面能和极性与色散分量、表面元素种类与含量,利用微脱黏方法表征中间相沥青基碳纤维与环氧树脂的界面剪切强度。研究结果表明:中间相沥青基碳纤维表面均存在明显沟槽结构,但其呈化学惰性,选用的中间相沥青基碳纤维与环氧树脂界面剪切强度最高约为50 MPa,明显低于聚丙烯腈基碳纤维;纤维表面能越高,尤其是极性分量越高,中间相沥青基碳纤维/环氧树脂界面剪切强度越大,这些结果揭示了中间相沥青基碳纤维与树脂基体界面性能主控因素。     

基于SPF/DB工艺的某翼类构件内部结构优化分析

采用SPF/DB工艺成形的翼类构件,内部结构不仅影响其力学性能,同时决定SPF/DB工艺的可行性。翼类构件在应用SPF/DB工艺成形过程中,内部夹层扩散焊接焊缝处形成筋条,从而增强结构强度,因此中间夹层扩散焊接筋条分布决定了成形后构件内部结构。本文利用有限元软件ABAQUS6.8对不同内部结构的某翼类构件进行静力学分析及超塑成形的数值模拟,得到既满足强度要求又有利于SPF/DB工艺要求的内部结构。     

双独立闭环复合液压伺服控制体系的分析

针对现有几种液压伺服控制系统的优缺点,基于高性能和节能这一发展趋势,提出基于伺服电机、定量泵、蓄能器和伺服阀的双独立闭环的新型复合控制体系.分析了其结构特点,建立了数学模型并进行了仿真分析和实验验证,证明新型控制体系充分发挥了各个控制环节的效能,实现了流量适应,较现有的控制方案简单可靠,在综合指标方面有了很大的提高,适合机载液压系统和弹载液压系统.      

高超声速飞行器后体/尾喷管优化设计

结合试验设计方法、替代模型技术和遗传算法构建一套改进的优化方法,并将其应用于高超声速飞行器后体/尾喷管的一体化设计.在构建优化方法时,针对替代模型采用渐近全局策略提高精度;针对遗传算法,采用实数编码、多目标定级排序和改进小生境技术.在后体/尾喷管的一体化设计应用中,结合高精度的计算流体力学(CFD,Computational Fluid Dynamics)求解,以两个设计点的推力和升力为目标,以力矩为约束,得到优化问题的Pareto最优前沿面,优化结果在综合性能方面有很大提升.该优化方法可进一步推广应用于更复杂的优化设计当中.      

BPM授时信号传输损耗的仿真建模

为了适应BPM发播系统升级改造,需要远场监测BPM授时信号的场强,因此有必要研究短波信道传输损耗,建立适当的计算模型。通过分析现有传输损耗理论模型,综合考虑地波、天波对BPM授时信号传输损耗的影响,在Labwindows/CVI开发环境下设计了BPM授时信号场强预测软件。通过将预测值与实测值比较,表明了该软件的可行性和准确性,可用于BPM授时信号场强的远场监测。