Microstructure and Oxidation Behavior of Modified Aluminide Coating on Ni3Al-based Single Crystal Superalloy

Al, Al-Si and Cr-Al-Si coatings are prepared onto IC20 alloy by powder pack cementation to improve the oxidation resistance of the alloy. The isothermal oxidation behaviors of the coatings and the uncoated IC20 alloy at 1 100 °C are comparatively investigated. For the coatings, less weight gains are obtained compared to the uncoated alloy after 100 h thermal exposure. The Al-Si coating exhibits the best oxidation resistance, while the addition of Cr accelerates the scale spallation. Phase transformation from β-NiAl to γ and γ′ occurs in the coating after oxidation for extended periods. The oxidation protection and degradation mechanisms for these coatings are discussed.     

软隔板双脉冲发动机二级点火延迟试验分析

在进行软隔板双脉冲发动机的试验研究时发现,二级脉冲出现远远超过指标要求的点火延迟.为了改进这种状况,从点火药量和隔板厚度两方面进行试验研究.结果表明单纯增加点火药量使得隔板破裂太快,能量过早地释放;而单纯增加隔板厚度使得隔板不能按预定位置和方式破裂,影响工作性能.最终结合软隔板双脉冲发动机的工作特点,从两方面同时改进,达到了比较合理的点火延迟.     

基于改进SWT模型的FGH96合金低周疲劳寿命预测

针对SWT（Smith-Watson-Topper）模型未考虑材料对平均应力影响的灵敏度以及忽略平均应力对材料塑性变形影响的问题,利用材料的屈服强度和抗拉强度,对Walker指数γ的计算公式进行了改进,并将其引入到SWT模型中对损伤控制参数进行了修正。同时结合M-H（Manson-Halford）模型塑性部分平均应力修正方法对SWT模型中的塑性变形参数进行了修正,从而提出了一种基于改进SWT模型的FGH96粉末高温合金低周疲劳寿命预测方法。利用不同材料的γ试验计算值对改进的Walker指数计算方法进行了验证,计算平均相对误差为10.25%。并利用FGH96合金和其他航空发动机材料的低周疲劳试验数据,对改进SWT模型的寿命预测精度及适用范围进行了评估,并与M-H、SWT和Lv模型进行了对比。结果表明,改进SWT模型对不同材料的预测结果基本位于±2倍分散带之内,其寿命预测能力要高于其他3种模型。     

基于离散元的粉末燃料输送弯管两相流特性研究

弯管是粉末燃料冲压发动机燃料输送系统的重要组成部分,为了研究弯管内气固两相流的流场结构、颗粒碰撞以及压力损失的变化规律,基于连续相-离散元（CFD-DEM）耦合模型,考虑颗粒的碰撞受力和弹塑性形变,对铝粉在弯管内的流动状况进行数值仿真。研究结果表明：CFD-DEM算法相对于传统的双流体模型和轨道法,能更为准确地描述颗粒流的碰撞信息和两相流的流动状况。弯管内的总压损失随流化气流量的增加,呈先减少再增加的趋势,在本文研究的条件下,优选的流化气流量为6g/s~7g/s(流化气速度为3.0m/s~3.5m/s);在低流速下,颗粒间的碰撞次数远大于颗粒-壁面间的碰撞,随着流速的增高,颗粒与外侧壁面间的碰撞次数迅速增高,并导致颗粒-壁面间的碰撞次数超过颗粒间的碰撞。弯管的弯径越大,弯管内的总压损失越大,但颗粒-颗粒、颗粒-壁面的碰撞次数均减少。     

粉末金属零件成形过程中出现损伤的数值模拟

使用基于Lee多孔材料屈服模型推导出的韧性损伤模型,对导向器类粉末金属零件成形过程中,在应力、应变、密度分布及其积累因素影响下,材料的损伤状态进行了数值模拟,在不同的加载状态下,压坯各点的损伤状况和破裂过程进行了跟踪,实验证实模拟结果具有较高的精度。     

A novel method of utilizing static mixer to obtain mixing homogeneity of multi-species powders in laser metal deposition

Real-time mixing of multi-species powder challenges Laser Metal Deposition (LMD) of Functionally Graded Materials (FGMs). The current work proposes a novel method of using a static mixer to realize rapid, uniform multi-species powder mixing. Firstly, copper powder and 316L stainless steel powder are selected to complete the powder mixing observation experiment with Scanning Electron Microscope (SEM) and Energy Dispersive Spectrometer (EDS). Secondly, computational fluid dynamics and particle mixing simulation models are used to analyze the flow field and particle motion characteristics in the static mixer. Finally, LMD experiment and metallographic observation are carried out with 316L stainless steel powder and WC powder to verify the feasibility of the static mixer. This study provides a theoretical and practical basis for powder mixing in laser processing with a static mixer. The conclusions can also be applied to other processing fields requiring real-time and uniform mixing of multi-species powders.     

纳米SiO2填充杂萘联苯聚醚酮复合材料的性能研究

采用悬浮液共混法制备了纳米SiO2填充新型含二氮杂萘酮结构聚芳醚酮(PPEK)复合材料,并对其力学性能、摩擦性能和热学性能进行了研究。结果表明：当纳米SiO2含量为1％时,复合材料的综合力学性能最佳;纳米SiO2的加入,使得复合材料的摩擦性能比纯树脂有了明显提高,当纳米SiO2含量达到7％时,摩擦磨损综合性能最好,且在大载荷下纳米SiO2更能有效改善复合材料的摩擦磨损性能。DSC测试表明,7％纳米SiO2填充PPEK的玻璃化转变温度与纯PPEK相当。     

纳米孔硅质绝热材料

介绍了纳米孔硅质绝热材料的绝热机理及发展概况，同时简要介绍了其生产工艺，并对其主要物化性能、热学性能及其它应用特点作了较为详细的说明。     

纳米材料在固体发动机上的应用

介绍了纳米材料在固体发动机上的应用情况及前景，重点论述了纳米材料在固体发动机壳体结构材料、外防护材料、喷管烧蚀材料以及大固体推进剂中应用的是新技术进展和潜力。     

Promotional effect of silica on the combustion of nano-sized aluminum powder in carbon dioxide

This paper presents how the combustion performance of nano-sized aluminum(nAl)powder in carbon dioxide are affected by silica. The ignition and combustion performance of nAl powder with silica addition were studied by a high-temperature tube furnace. An s-type thermocouple and a high-speed motion acquisition instrument were performed to evaluate the ignition temperature, maximum combustion temperature, maximum change of rate of temperature, and combustion propagation speed. The combustion effici...