可变形翼战术导弹飞行动力学联合仿真研究

基于集中质量假设发展的一套适于可变形翼导弹的多体运动模型,以附加惯性项及快变气动参数的形式来反映弹翼变形对导弹动态特性的影响,涉及交叉求解不同弹翼外形对应的气动特性及运动方程.由此提出的一种基于Missile DATCOM与MATLAB/SIMULlNK的联合仿真方法,应用于典型轴对称导弹的变翼动态特性研究中,快速有效...     

柔性机翼阵风响应与被动减缓研究

高空长航时无人机的机翼展弦比大、柔性较强,飞行过程中极易受到阵风的影响。文章以几何精确本征理论建立结构模型,耦合 Pitt-Peters动力入流理论建立柔性机翼非线性气弹模型,研究了柔性机翼阵风响应以及翼尖被动阵风减缓效应。采用空间 -时间平行的有限元离散方法,将气弹方程转化为一阶微分代数方程,Newton-Raphson和 Generalized-α算法分别用于静态变形和动态响应的求解,通过算例研究了离散阵风载荷下柔性机翼的阵风响应,结果表明翼尖被动阵风减缓装置对机翼变形有明显的减缓效果。     

基于晶体塑性理论的疲劳裂纹起始数值模拟

在疲劳荷载作用早期,材料在晶体尺度出现裂纹的萌生,为了研究疲劳短裂纹的发展,利用Monte Carlo法建立了多晶体晶粒集合的Voronoi有限元模型,并在Ansys Usermat子程序接口下编写了晶体塑性本构方程子程序,修正了以拉伸硬化为主的疲劳裂纹起裂的计算机模拟方法,并结合TANAKA和MURA的位错偶极子模型,模拟了晶粒集合在疲劳荷载作用下的裂纹萌生,最后与文献实验数据对比,这一修正的方法更加符合实验结果和宏观现象.     

Flapping wing micro-aerial-vehicle:Kinematics,membranes, and flapping mechanisms of ornithopter and insect flight

The application of biomimetics in the development of unmanned-aerial-vehicles (UAV) has advanced to an exceptionally small scale of nano-aerial-vehicles (NAV), which has surpassed its immediate predecessor of micro-aerial-vehicles (MAV), leaving a vast range of development possi-bilities that MAVs have to offer. Because of the prompt advancement into the NAV research devel-opment, the true potential and challenges presented by MAV development were never solved, understood, and truly uncovered, especially under the influence of transition and low Reynolds number flow characteristics. This paper reviews a part of previous MAV research developments which are deemed important of notification; kinematics, membranes, and flapping mechanisms ranges from small birds to big insects, which resides within the transition and low Reynolds number regimes. This paper also reviews the possibility of applying a piezoelectric transmission used to pro-duce NAV flapping wing motion and mounted on a MAV, replacing the conventional motorized flapping wing transmission. Findings suggest that limited work has been done for MAVs matching these criteria. The preferred research approach has seen bias towards numerical analysis as com-pared to experimental analysis.     

Dynamic modeling and analysis of vortex filament motion using a novel curve-fitting method

Applications of a novel curve-fitting technique are presented to efficiently predict the motion of the vortex filament, which is trailed from a rigid body such as wings and rotors. The governing equations of the motion, when a Lagrangian approach with the present curve-fitting method is applied, can be transformed into an easily solvable form of the system of nonlinear ordinary differential equations. The applicability of Be′zier curves, B-spline, and Lagrange interpolating polynomials is investigated. Local Lagrange interpolating polynomials with a shift operator are proposed as the best selection for applications, since it provides superior system characteristics with minimum computing time, compared to other methods. In addition, the Gauss quadrature formula with local refinement strategy has been developed for an accurate prediction of the induced velocity computed with the line integration of the Biot–Savart law. Rotary-wing problems including a vortex ring problem are analyzed to show the efficiency, accuracy, and flexibility in the applications of the proposed method.     

带非线性支撑的转子有限元模型求解方法

用数值方法研究了非线性支撑的柔性转子系统的动学行为,提出了一种将有限元与非线性支撑结合的模型和求解方法。利用有限元法(FEM)构建转轴和转盘部分的模型,通过矩阵进行组合;利用离散元方法对包含滚动轴承和挤压油膜阻尼器(SFD)的支撑部分进行建模,此部分包含4个单元,分别为轴承内圈、外圈、SFD内圈和支撑鼠笼。有限元部分和离散元部分通过轴端节点相连,仿真过程中轴端位移传递给非线性支撑部分,支撑部分通过位移计算得到的非线性力反过来作用于有限元转子轴端部分。为了耦合求解有限元转子和非线性支撑组成的数学模型,提出了一种综合的迭代求解方法,克服传统的有限元求解方法对轴端隐性非线性支撑的求解局限性。由于转轴部分采用了Timoshenko梁单元建模,对比与简单转子模型,可以考虑陀螺力矩和轴的柔性特征,更能体现非线性支撑对振动真实影响。在建立的20个轴单元的有限元转子模型中,非线性响应更多体现在靠近非线性支撑的节点1和节点21处,响应频谱中靠近轴端的节点能体现出滚动轴承的2倍和3倍变柔振动频率。     

基于线化稳定性理论的后掠翼边界层内横流稳定性研究

采用Mack方法求解忽略曲率和压缩性的三维线化稳定性方程（Orr-Sommerfeld方程）,针对无限展长后掠翼,计算分析边界层内不同波长横流驻波沿弦向的放大率,确定最不稳定波的波长。计算结果与参考文献中的实验结论和计算结果符合较好,表明该方法能够准确的预测出最不稳定波的波长,可以用来指导横流驻波主导下的后掠翼流动稳定性问题研究。     

模态综合的直接变换法

基于固定界面模态综合的Craig-Bampton方法,提出了模态综合的直接变换方法,该法在形式上更简洁,适用于大规模动力学系统的模态分析和动力学模型减缩。对采用直接变换法模态综合过程的计算误差做了分析,给出了计算误差界,阐明了模态综合后总体结构的固有频率与子结构保留主模态个数之间的关系。针对子结构界面自由度太大的情况,提出了直接变换法的分部算法,不需组集系统总刚度、总质量矩阵,仅在子结构的基础上完成系统的减缩。计算实例表明该算法的有效性及计算的稳定性。     

高精度反射面板制造中边值问题的求解方法(英文)

采用三层铝板两层蜂窝芯的夹层结构制造高精度反射面板是一种先进、复杂的技术。其中,单层铝板的受力分析和夹层板的回弹计算是成形精度的根本保障。利用Fourier级数表示单层板应力函数、利用幂级数表示夹层板挠度函数,分别对高精度反射面板制造中单层板压贴和夹层板回弹两类边值问题进行了求解。与有限元模拟结果对比表明,本文提出的单层板压贴膜应力计算Fourier级数法具有较高精度;与试验结果对比表明,本文提出的夹层板回弹量幂级数法具有满意精度。     

低雷诺数条件下微型无人机机翼形状的研究

利用CFD软件FLUENT,通过Spalart-Allmaras模型、低Reynolds和二层模型这3种湍流模型对正八边形机翼平面布局进行绕流分析并与试验数据进行对比,选择了低Reynolds湍流模型对4种微型无人机机翼平面形状的低雷诺数气动特性进行模拟分析,结果表明,矩形布局和反齐默曼布局是微型无人机比较理想的设计选择.