风挡防冰表面温度场计算

在研究国内外有关资料的基础上，采用了量纲分析的方法，建立了风挡外表面温度场的计算模型。回避了对自由流与射流相互干扰这一复杂问题的研究，同时对该计算模型进行了验证，并开发了相应的计算程序。该问题的解决，填补了国内在该领域中的空白。     

Adaptive suppression of passive intermodulation in digital satellite transceivers

For the performance issues of satellite transceivers suffering passive intermodulation interference,a novel and effective digital suppression algorithm is presented in this paper.In con trast to analog approaches,digital passive intermodulation (PIM) suppression approaches can be easily reconfigured and therefore are highly attractive for future satellite communication systems.A simplified model of nonlinear distortion from passive microwave devices is established in consid eration of the memory effect.The multiple high-order PIM products falling into the receiving band can be described as a bilinear predictor function.A suppression algorithm based on a bilinear poly nomial decorrelated adaptive filter is proposed for baseband digital signal processing.In consideration of the time-varying characteristics of passive intermodulation,this algorithm can achieve the rapidness of online interference estimation and low complexity with less consumption of resources.Numerical simulation results show that the algorithm can effectively compensate the passive intermodulation interference,and achieve a high signal-to-interference ratio gain.     

Motion synchronization in a dual redundant HA/EHA system by using a hybrid integrated intelligent control design

This paper presents an integrated fuzzy controller design approach to synchronize a dis-similar redundant actuation system of a hydraulic actuator (HA) and an electro-hydrostatic actu-ator (EHA) with system uncertainties and disturbances. The motion synchronous control system consists of a trajectory generator, an individual position controller for each actuator, and a fuzzy force tracking controller (FFTC) for both actuators. The trajectory generator provides the desired motion dynamics and designing parameters of the trajectory which are taken according to the dynamic characteristics of the EHA. The position controller consists of a feed-forward controller and a fuzzy position tracking controller (FPTC) and acts as a decoupled controller, improving posi-tion tracking performance with the help of the feed-forward controller and the FPTC. The FFTC acts as a coupled controller and takes into account the inherent coupling effect. The simulation results show that the proposed controller not only eliminates initial force fighting by synchronizing the two actuators, but also improves disturbance rejection performance.     

A joint mid-course and terminal course cooperative guidance law for multi-missile salvo attack

Salvo attacking a surface target by multiple missiles is an effective tactic to enhance the lethality and penetrate the defense system. However, existing cooperative guidance laws in the mid-course or terminal course are not suitable for long- and medium-range missiles or stand-off attacking. Because the initial conditions of cooperative terminal guidance that are generally generated from the mid-course flight may not lead to a successful cooperative terminal guidance without proper mid-course flight adjustment. Meanwhile, cooperative guidance in the mid-course cannot solely guarantee the accuracy of a simultaneous arrival of multiple missiles. Therefore, a joint mid-course and terminal course cooperative guidance law is developed. By building a distinct leader-follower framework, this paper proposes an efficient coordinated Dubins path planning method to synchronize the arrival time of all engaged missiles in the mid-course flight. The planned flight can generate proper initial conditions for cooperative terminal guidance, and also benefit an earliest simultaneous arrival. In the terminal course, an existing cooperative proportional navigation guidance law guides all the engaged missiles to arrive at a target accurately and simultaneously. The integrated guidance law for an intuitive application is summarized. Simulations demonstrate that the proposed method can generate fast and accurate salvo attack.     

增强FMS柔性的关键技术研究

柔性制造技术是现代制造业广泛采用的一种先进的制造技术。实现生产柔性是引进柔性制造技术的根本目的。ＦＭＳ是柔性制造技术应用的典型模式。     

基于有限体积法和SNBCK模型的红外辐射特性计算

耦合求解流场、组分浓度场、基于SNBCK模型的气体辐射传输/能量方程以求准确模拟飞行器排气系统气动热力及红外特性.窄带模型参数由HITEMP逐线计算数据库计算得到.通过CO₂4.3μm波段吸收率计算,圆柱炉膛辐射换热特性计算两个算例验证了所采用程序求解辐射传输/能量方程的准确性.最后计算了两种二元喷管的红外特性,结果表明大宽高比二元喷管地面和空中状态红外辐射特性差异巨大.     

系统思想在航天企业全面风险管理实施中的应用

介绍了风险管理国际标准ISO31000的核心内容——风险管理框架,以及系统思想的基本理念;以系统观点和方法为基础,对国际标准在航天企业全面风险管理中的应用进行了探讨。通过对全面风险管理工作的系统分解与集成,并以其中的"环境"分系统建设为例,进一步细分工作内容,与现有业务管理工作相结合,探索出全面风险管理工作在航天企业落地的基本路径。     

Spatial approaches to moons from resonance relative to invariant manifolds

In this study, the final approach to a moon or other body from resonance is explored and compared to the invariant manifolds of unstable periodic orbits. It is shown that the stable manifolds of planar Lyapunov orbits can act as a guide for the periods or resonances that are required for the final approach in both the planar and spatial problems. Previously developed techniques for the planar problem are expanded for use with resonances and used for comparison with trajectories approaching a moon from these resonances. A similar technique is then used for exploring the relationship of invariant manifolds to approach trajectories in the spatial problem. It is shown that the invariant manifolds of unstable periodic orbits provide insight into the trajectory design, and they can be used as a guide to the more direct approach trajectories.     

复杂可修系统效能中可信度矩阵的构造方法

复杂可修系统可信度建模对保证效能的定量分析至关重要.本文在考虑不同维修状况的基础上,着重对不同任务剖面内相应任务阶段中武器装备可信度进行了深入的定量分析和综合,进而构造出武器装备的可信度矩阵,用于武器装备的效能分析;文中以某地面车辆为例,进一步论证了武器装备可信度矩阵的工程含义,旨在为合理确定一大类武器装备的效能和可信度指标提供理论依据.     

A formal approach using SysML for capturing functional requirements in avionics domain

In this work, a Model-Based Systems Engineering approach based on SysML is proposed. This approach is used for the capture and the definition of functional requirements in avionics domain. The motivation of this work is triple: guide the capture of functional requirements, validate these functional requirements through functional simulation, and verify efficiently the consistency of these functional requirements. The proposed approach is decomposed into several steps that are detailed to go from conceptual model of avionics domain to a formal functional model that can be simulated in its operating context. To achieve this work, a subset of SysML has been used as an intermediate modelling language to ensure progressive transformation that can be understood and agreed by system stakeholders. Formal concepts are introduced to ensure theoretical consistency of the approach. In addition, transformation rules are defined and the mappings between concepts of ARP4754A civil aircraft guidelines and SysML are formalized through meta-model. The resulting formalization enables engineers to perform functional simulation of the top-level functional architecture extracted from operational scenarios. Finally, the approach has been tested on an industrial avionics system called the Onboard Maintenance System.