一种在理论模线控制下的飞机结构立体图快速画法

绘制飞机结构立体图通常会涉及到飞机外形。由于飞机外形复杂,用传统方法绘制与外形有关的立体图不仅速度慢,而且局限性大。本文介绍一种在理论模线控制下的飞机结构立体图快速画法。     

NiCrAlY涂层的铬含量及结构对热腐蚀寿命的影响

研究了三种铬含量不同、结构不同的ＮｉＣｒＡｌＹ涂层的抗腐蚀寿命。结果表明,在研究的条件下,Ｃｒ提高２％,涂层平均抗腐蚀寿命提高４０％。而成分相同,合理选择涂层结构－元素浓度分布,涂层平均抗热腐蚀寿命提高２～３倍。     

被动式寻的导弹的运动跟踪变结构制导

应用运动跟踪变结构控制理论设计被动式寻的导弹的制导律。这种运动跟踪变结构制导律（ＭＴＶＳＧ）可以令导弹－目标相对视线角速度按照给定的运动规律变化,从而增强被动跟踪问题（等价于一个非线性系统）的可观性,同时保证导弹有很高的命中精度。仿真研究表明,在ＭＴＶＳＧ下,系统的可观性明显增强,因此系统状态的估计精度较高。进一步的研究表明,ＭＴＶＳＧ对系统状态估计误差有很强的鲁棒性。ＭＴＶＳＧ的上述各种优点使得导弹有很高的命中精度。     

Variable structure multiple model fixed-interval smoothing

This paper focuses on fixed-interval smoothing for stochastic hybrid systems. When the truth-mode mismatch is encountered, existing smoothing methods based on fixed structure of model-set have significant performance degradation and are inapplicable. We develop a fixed-interval smoothing method based on forward- and backward-filtering in the Variable Structure Multiple Model (VSMM) framework in this paper. We propose to use the Simplified Equivalent model Interacting Multiple Model (SEIMM) in the forward and the backward filters to handle the difficulty of different mode-sets used in both filters, and design a re-filtering procedure in the model-switching stage to enhance the estimation performance. To improve the computational efficiency, we make the basic model-set adaptive by the Likely-Model Set (LMS) algorithm. It turns out that the smoothing performance is further improved by the LMS due to less competition among models. Simulation results are provided to demonstrate the better performance and the computational efficiency of our proposed smoothing algorithms.     

Geometry and size optimization of stiffener layout for three-dimensional box structures with maximization of natural frequencies

Based on the growth mechanism of natural biological branching systems and inspiration from the morphology of plant root tips, a bionic design method called Improved Adaptive Growth Method (IAGM) has been proposed in the authors’ previous research and successfully applied to the reinforcement optimization of three-dimensional box structures with respect to natural frequencies. However, as a kind of ground structure methods, the final layout patterns of stiffeners obtained by using the IAGM are highly subjected to their ground structures, which restricts the optimization effect and freedom to further improve the dynamic performance of structures. To solve this problem, a novel post-processing geometry and size optimization approach is proposed in this article. This method takes the former layout optimization result as start, and iteratively finds the optimal layout angles, locations, and lengths of stiffeners with a few design variables by optimizing the positions of some specific node lines called active node lines. At the same time, thicknesses of stiffeners are also optimized to further improve natural frequencies of three-dimensional box structures. Using this method, stiffeners can be successfully separated from their ground structures and further effectively improve natural frequencies of three-dimensional box structures with less material consumption. Typical numerical examples are illustrated to validate the effectiveness and advantages of the suggested method.     

航空复合材料纸蜂窝夹芯结构热成型开裂研究

飞机复合材料芳纶纸蜂窝夹芯部件在热压罐成型时处于热-力耦合工况。本文关注热成型过程中可能出现的蜂窝开裂现象,通过试验获得了蜂窝芯的拉、压、剪性能参数和芳纶纸的热性能参数,同时结合有限元分析手段和反演方法,对整体蜂窝夹芯部件的热-力顺序耦合和局部芯子抽真空导致的蜂窝胞元间压强差进行数值模拟。结果表明：成型过程中的热应力不会导致蜂窝胞元间胶层开裂,局部憋气的压差可能导致蜂窝开裂;胶层部分破坏与胶层完全破坏所需的胞元间压强差的差值与胶层初始法向断裂应力正相关;胶层完全破坏所需的胞元间压强差随着受载胞元数量的增多而减小。     

国产中温固化热破胶膜性能

考察了一种适用于卫星太阳翼基板的国产中温固化胶膜的胶接性能和热破工艺性,并分别采用国产和进口胶膜,利用胶膜热破施胶方法制备了碳纤维网格面板/铝蜂窝芯夹层结构,对其弯曲性能进行评价。结果表明,国产胶膜的室温拉伸剪切强度（铝基材）为34.9 MPa,150 ℃时拉伸剪切强度降为10.2 MPa,-150 ℃时拉伸剪切强度降为30.4 MPa。碳纤维复合材料作为胶接基材时,室温拉伸剪切强度为17.5 MPa,破坏模式为基材分层破坏和胶黏剂内聚破坏的混合破坏模式。国产胶膜具有良好的热破工艺特性,在合适的工艺条件下,破孔率优于99.9%,90°板-芯剥离强度为15.4 N/cm;采用国产胶膜制备的蜂窝夹层结构的弯曲性能与采用进口Redux312UL的接近,弯曲刚度为1.94×10⁸ N·mm²,弯曲强度为35.7 MPa。     

复合材料翼面结构多级优化设计方法

建立一种适用于复合材料结构的多级优化方法。第一级优化包括系统级优化和元件级优化。系统级优化以板厚度或杆横截面为设计变量，从Ｋｕｈｎ－Ｔｕｃｋｅｒ出发导出改进设计变量的迭代式；元件级优化保持最优迭层板厚度和节点位移不变，利用线性规划技术使结构应变能最大，得到最优分层厚度。第二极优化以纤维铺向角为设计变量，以降低各约束点处位移为目标进行优化，提高结构刚度。算例研究复合材料翼面盒段满足强度要求和挠曲变形规律要求时的优化设计，结果表明该方法计算方便，接口简单，收敛迅速。     

防老剂H对丁羟推进剂粘合剂体系形态结构和力学性能的影响

运用透射电镜（TEM）和动态力学分析（DMA）研究了丁羟推进剂粘合剂体系的形态结构,发现在该体系中存在硬段、软段两相分离结构；防老剂H（N,N’-二苯基对苯二胺）的加入,引入了更多的硬段微区,使两相结构更为清晰；解释了防老剂H能大幅度提高粘合剂体系力学性能的原因。     

大推力速燃火箭发动机蜂巢状装药的设计与理论分析

针对速燃火箭发动机大推力短燃时的特点,提出一种满足此要求的新型装药——蜂巢状装药,并对该药型的内弹道特性、燃面规律和力学特点作出了定性和定量分析,对速燃发动机的装药设计有一定的借鉴意义。